Tender For Maintenance Of The Office Of The Sdo Pwd(Rnb) Sub-Division In/C Executive Engineer, Mohanpur Division During The Year 2026-27/Sh: Fitting Fixing Of Sanitary Installation, Water Supply, Pipeline, Wall Tiles Etc.
Tender Value
2.51 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
5 days left
EMD
5023
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tripura → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of The Office Of The Sdo Pwd(Rnb) Sub-Division In/C Executive Engineer, Mohanpur Division During The Year 2026-27/Sh: Fitting Fixing Of Sanitary Installation, Water Supply, Pipeline, Wall Tiles Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing Chlorinated PolyvinylChloride (CPVC) pipes, havingthermal stabilityforhot&coldwatersupplyincludingallCPVCplain&brassthreadedfittingsincludingfixingthepipewithclampsat 1.00mspacing. This includes jointingofpipes&fittingswithonestepCPVC solvent cementand testingof joints complete asper directionofEngineer in Charge.Internal work - Exposed on wall |
| 2 | 15 mm nominal outer dia .Pipes. 2 x 30.00 1 x 10.00 |
| 3 | 25 mm nominal outer dia .Pipes. 7 x 30.00 1 x 10.00 |
| 4 | 40 mm nominal outer dia .Pipes. 1 x 30.00 1 x 20.00 |
| 5 | Providing and fixing C.P. brass bib cock of approvedquality conforming to IS:8931 15 mm nominal bore 1 x 8 |
| 6 | Providing and fixing PTMT pillar cock of approved quality and colour . 15mm nominal bore, 107mm long, weighing not less than 110 grams. 1 x 5 |
| 7 | Providing and fixing PTMT angle stop cock 15mmnominal bore, weighing not less than 85gms. 1 x 15 |
| 8 | Providing and fixing unplastisised P.V.C. connection pipe with PTMT Nuts of approved quality and colour. 15 mm nominal bore with 45 cm length. 1 x 15 |
| 9 | Providing and fixing P.V.C. waste pipe for sink or washbasin including P.V.C. waste fittings complete.Flexible pipe32 mm dia 1 x 12 |
| 10 | Providing and fixing P.V.C. low level flushing cisternwith manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixturescomplete.10 litre capacity-White. 1 x 6 |
| 11 | Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge.600 mm X 300 mm in all shades and design 1 x 68x 5 |
| 12 | Providing and applyingwhite cement based putty ofaverage thickness 1 mm, of approved brand andmanufacturer,over the plastered wall surface to preparethe surface even and smooth complete. 1 x 6 x 3 |
| 13 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade[Payment shall be made after submission of TestCertificate issued by the Manufacturer] :New work ( two or more coats) over and including water thinnable priming coat with cement primer. 1 x 6 x 3 |
| 14 | Finishing walls with premium acrylic smooth exteriorpaint with Silicon additives of required shade ofapproved brand and manufacture [Payment shall bemade after submission of Test Certificate issued by the Manufacturer] :New work ( two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 1 x 6 x 3 |
| 15 | Providing and fixing 600x120x5mm glass shelf withedges round of supported on anodised aluminium angleframe with C.P. brass brackets and guard rail completefixed with 40 mm long screws, rawl plugs etc., complete. 1 x 2 |
| 16 | Providing and fixing M.S. holder-bat clamps of approveddesign to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. :For 100 mm dia. Pipe 1 x 10 |
| 17 | For 75 mm dia. Pipe 1 x 10 |
| 18 | Providing and fixing on wall face unplasticised RigidPVC soil, waste & vent pipes (working pressure 6 kg /cm2) conforming to IS : 13592 Type A includingjointing with seal ring conforming to IS : 5382leaving 10 mm gap for thermal expansion:Single socketed pipe - 110 mm OD 1 x 50.00 |
| 19 | Providing and fixing on wall face unplasticised- PVCmoulded fittings/ accessories for unplasticised RigidPVC soil, waste & vent pipes conforming to IS : 13592Type A including jointing with seal ring conformingto IS : 5382 leaving 10 mm gap for thermal expansion:Coupler110 mm 1 x 12 |
| 20 | Single equal tee with door110X110X110mm 1 x 12 |
| 21 | Bend 87.5110 mm 1 x 12 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender