Tender For special repair To Various Non Residential Buildings Under Division No.-03, Shimla. (Sh:- Repair Of Retaining Wall, Roof And Pavers, providing and laying Storage Tank And Other Minor Reapir Work In Deptt. Of Environment , Science Technology
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2026
5 days left
EMD
10270
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special repair To Various Non Residential Buildings Under Division No.-03, Shimla. (Sh:- Repair Of Retaining Wall, Roof And Pavers, providing and laying Storage Tank And Other Minor Reapir Work In Deptt. Of Environment , Science Technology And Climate Change At U.S Club Shimla.)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within 20 metres lead.G.I. Sheet roofing |
| 2 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge |
| 3 | Demolishing random rubble masonry / polygonal rubble masonry manually/ by echanical means including stacking of serviceable material and disposal of unserviceable material within all lead as per direction of Engineer-in-charge complete including carriage of material within all leads and lifts. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kind of soils. |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1cement : 1.5coarse sand): 3 graded stone aggregate 20mm nominal size) complete including carriage of materials within all leads and lifts as per direction of Engineer-in- charge |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carriage of materials within all leads and lifts:- Mild steel and Medium Tensile steel bars. |
| 8 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth In Cement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts |
| 9 | Providing and fixing murga jali of wire mesh on wall before plastering with nails etc. complete or as per the direction of engineer-in-charge including carriage of materials within all leads and lifts |
| 10 | Random rubble masonry / polygonal rubble masonry uncoursed / brought to courses with hard stone of approved quality in foundation and plinth in cement mortor 1:6 (1 cement :6 sand) in breast walls and retaining walls.Including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 11 | Providing weap holes in Brick Masonary/Stone masonary,plain/ reinforced concrete abutment,wing wall with 110mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete. |
| 12 | Providing and laying 60mm thick heavy duty polished precast cement conrete inter locking paver blocks vibro compacted of NTC make of approved design and shade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for seperately) 40mm thick block.including carriage of materials within all leads and lifts. |
| 13 | Providing and laying heavy duty pre-polished precast cement conrete inter locking paver blocks of NTC make or equivalent of approved design and shade vibro compacted of approved design, shade and size border or kurb block grey or coloured over sub-base of concrete with 50 mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (Sub base concrete floor to be paid for sepretarly) 60mm thick block including carriage of materials within all leads and lifts.(Labour Rate). |
| 14 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank capacity (2000 Litre) |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - 15mm nominal bore |
| 16 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15mm nominal bore |
| 17 | Providing and fixing brass gate valve (horizontal plunger type)-:15mm nominal bore including carriage of materials within all leads and lifts. 15mm dia. |
| 18 | Providing and fixing water proof shuttering ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) 12mm thick including carriage of materials within all leads and lifts. |
| 19 | Providing and fixing 6mm PVC ceiling/paneling with tongued and grooved jointing of standard quality and approved shade and colour complete including carriage of material within all leads and lifts as per direction of Engineer-in-Charge |
| 20 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 21 | Providing and fixing Tata Durashine 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/e fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 22 | Providing ridges or hips 60 cm over all in plain G.I.sheet with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. Limpetand bitumen washers copmlete including carriage of materials in all leads and lifts |
| 23 | Providing 0.63 mm thick Valleys 90 cm over all in plain G.I. sheets fixed with galvanised iron J or L hooks.bolts and nuts 8mm dia G.I. limpet and bitumen washers complete:-including carriage of materials in all leads and lifts |
| 24 | Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of Engineer-in-charge |
| 25 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with including carriage of materials within all leads and lifts (i) 4mm thick. Glass Panes |
| 26 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied of approved brand and manufacture complete including carriage of materials within all leads and lifts |
| 27 | Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender