Tender For Construction Of Prefab Structure For Hptdc Café At Auhar Distt. Bilaspur (H.P).
Tender Value
75.39 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
13 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Prefab Structure For Hptdc Café At Auhar Distt. Bilaspur (H.P).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work of all kind of soil by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils within all lead and lifts as per the diretion of Engineer in Charge at site. |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) as per the dierction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Tata/Sail/Jindal Panther/Shyam steel or as approved by HPPWD. Thermo-Mechanically Treated bars of grade Fe-500D or more as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 12 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 13 | Providing and laying double charge vitrified floor tiles of size 1200x1200 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make , laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete Kajaria/Nitco/RAK or equivalent make as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Basic Price not less than Rs. 75 per Sqft.) Note:- Before laying the sample may be approved from the authority. |
| 14 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Tata/Jindal or equivalent make) |
| 15 | Stone soling properly hand packed filling interstices with spall and consolidating by hand ramming as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. |
| 16 | Providing and fixing of MS Structure Fabrication providing supply, designing and engineeing fabrication drawing & detail, footing details providing supply of MS steel and fabrication in position of MS structure with base plate column, beams, trusses, T-section, channel etc. materials specification MS base plate-400MMx400MMX16MM rhick= 10 pcs (202 KG) MS Column-150MMX150MMX5.4MM thick = 9 pcs (1325KG) MS Pipe beam 150MMx150MMx302MM thick =19 pcs (974 KG) MS Truss Pipe-5MMx75MMx3.2 thick =18 Pcs (780Kg) MS Bracing-40MMx40MMx2.2MM thick = 11 Pcs (173Kg) MS Purlin member-75MMx75MMx3.2MM thick = 9 Pcs )391Kg) as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Tata/JSW/Sail or equivalent make) |
| 17 | Providing and fixing of PUFF Panel- (FOR WALL) The wall panels shall be made up of 50mm thick Composite, sandwich between Pre-painted Galvanized Iron sheets. The panels shall be made of micro Ribbing Pre-Painted Galvanized Iron sheet with 50 MM rhick layer of PU Foam of density of 40_+2Kg/M3 as insulation. The wall panels will have Tongue Groove Arrangement pre Galvanized Iron sheet shall have minimum Coating 2-3 Micron Epoxy primer and 16 Micron polyester top coats on the finish surface as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Kingspan/Jindal/Everest/LLOYD insulation (India) or equivalent make) Note:- Before installation the sample may be approved from the authority. |
| 18 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality. 6mm thick toughened glass/wire mess as per the specification attached and as per approved drawing & direction of Engineer-in-Charge. Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window all sizes). (Fenesta, Aluplast, Prominence or equivalent make as approved by Engineer-In-Charge)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 19 | Providing and fixing 0.50 MM Profile sheet -Pre-painting Galvanized Iron sheet shall have minimum coating of 2-4 micron and 20 micron polyester top coats on this finish surface and 4-8 micron Alkyl Base on reverse as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Tata Durashine or equivalent make) |
| 20 | Providing and fixing False Ceiling- Laminated gypsum Boars 12.5 MM to 15 MM thick with recommended frame work as per design confirming to the relevant IS2095 (Part-1-2) standards. The board shall be fixed as a steel frame work with all necessary accessories, Jointing compound, paper taps, screws and finishing complete as per the direction of Engineer-In-Charge and manufactures specifications including carriage of materials within all leads, lifts and heights. |
| 21 | Providing and fixing 15 mm dia nominal bore G.I. pipes Tata, Jindal (Hisar) or equivalent make (heavy duty) complete with G.I. fittings including trenching and refilling etc as per direction of Engineer in Charge including carriage of materials within all leads, lifts and heights. |
| 22 | Providing and fixing 75 MM high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Finolex/Victus/Supreme or equivalent make) |
| 23 | Providing and fixing 110 MM high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Finolex/Victus/Supreme or equivalent make) |
| 24 | Providing and fixing 75 MM PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make). Plain bend |
| 25 | Providing and fixing 110 MM PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make). Plain bend |
| 26 | Providing and fixing PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make). Door bend 75MM nominal size |
| 27 | Providing and fixing PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make). Door bend 110 MM nominal size |
| 28 | Providing and fixing PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make). Plain tee 75MM |
| 29 | Providing and fixing PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make). Plain tee 110MM |
| 30 | Providing and fixing PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make) . Collar 75MM nominal size |
| 31 | Providing and fixing PVC finolex fittings and accessories of standard/ approved quality as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Finolex/Victus/Supreme or equivalent make). Collar 110MM nominal size |
| 32 | Providing and fixing 15MM brass full way valve with wheel as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights (Zoloto/Leader/Kartar or equivalent make). |
| 33 | Providing and fixing G.I./M.I Union of following sizes 15 MM as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Unik/KS/AMCO or equivalent make) |
| 34 | Providing & Fixing 110MM PVC finolex floor trap of self cleansing design complete including cost of cutting & making good the walls & floors as per the direction of Engineer-In-Charge including carriage of materials within all leads, lifts and heights. (Finolex/Victus/Supreme or equivalent make) |
| 35 | Providing and fixing vitreous china wash down, water closet Kerovit make Cat No. KB3007 (LEELA) EWC with seat cover having size 660*360*760 mm with integral P or S trap i/c jointing the trap with soil pipe in cement mortar 1:1 (1 cement :1 sand) complete in all respect as per the direction of Engineer-in-charge including carriage of materials within all lead, lifts and heights. |
| 36 | Providing and fixing vitreous china counter top washbasin Kerovat make Cat No KS246 (MAX) having size 570x420x150 mm as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 37 | Providing and fixing CP Bottle Trap Kerovit make Cat No. KA870002 300 mm long complete as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 38 | Providing and fixing CP grating 125x125 mm Kerovit make Cat No. KA640002 complete as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 39 | Providing and fixing CP Waste Coupling full thread 32 mm Kerovit make Cat No. KA870006 complete as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 40 | Providing and fixing CP Towel Rail 600 mmlong Kerovit make Cat No. KA70001 complete as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 41 | Providing and fixing CP Towel Ring Kerovit make Cat No. KA670005 complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 42 | Providing and fixing Looking Mirror of size 700x500 mm Kerovit make Cat No. KAJ0390 complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 43 | Providing and fixing CP Center Hole Basin mixer Kerovit make Cat No. KB111027 (NUCLEUS) complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 44 | Providing and fixing CP Bib Tap 15 mm nominal bore Kerovit make Cat No. KB111004 (NUCLEUS) complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 45 | Providing and fixing CP Toilet Paper Holder Kerovit Cat No. KA930007 complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 46 | Providing and fixing CP Angle Volve 15 mm nominal bore Kerovit make Cat No. 111003 (NUCLEUS) complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 47 | Providing and fixing CP Soap Dish Kerovit make Cat No. KA670004 complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 48 | Providing and fixing CP Health Faucet Kerovit make Cat No. KA5800018 complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 49 | Providing and fixing CP Towel Rack Kerovit make Cat No. KA930008 complete as per the direction of Engineer in Charge including carriage of materials within all lead, lifts and heights. |
| 50 | Providing and fixing CP Connection Pipe 50 cm long 15 mm nominal bore Cerovit make Cat No. KA950001 complete as per the diretion of Engineer in Charge including carriage of materials within all lead, lifts and heights. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender