Tender For Repair/Renovation To Various Residential Buildings Under Division No.-03, Shimla (Sh:- Repair Of Wc/Bath, Kitchen, providing and laying Cupboard, Painting & Distempering And Si In Set No. 7, New Type V At Richmound Under Benmore Sub Divisi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2026
6 days left
EMD
7810
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation To Various Residential Buildings Under Division No.-03, Shimla (Sh:- Repair Of Wc/Bath, Kitchen, providing and laying Cupboard, Painting & Distempering And Si In Set No. 7, New Type V At Richmound Under Benmore Sub Division.)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in -charge Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix) |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres leadcomplete including carriage of materials within all leads and lifts.For thickness of tiles 10 mm to 25 mm |
| 3 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. including carriage of materials within all leads and lifts |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) complete inclding carriage of materials in all leads and lifts |
| 7 | Providing wood work in frames of false ceiling, partition etc. sawn and and putup in position including carriage of materials within all leads and lifts. Rai wood/Chill wood |
| 8 | Providing and fixing 9mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials within all leads and lifts |
| 9 | Providing and fixing 0.63 mm thick PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts |
| 10 | Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts |
| 11 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts. |
| 12 | Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts |
| 13 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts. |
| 14 | Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts |
| 15 | Providing and fixing aluminium handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts. 125mm |
| 16 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 17 | Providing and fixing drawer Locks including carriage of materials within all leads and lifts GODREJ MAKE |
| 18 | Providing and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts:-Plain Glass:4mm thick |
| 19 | Providing and fixing fly proof galvanised M.S. wire gauge of IS gauge designation 85g with wire of dia 0.56 mm to windows and clerestory windows including required beading complete including carriage of materials within all leads and lifts |
| 20 | Providing and fixing Powder coated curtain rod 25mm dia with brackets, end firnels and screws etc. complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 21 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm. |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 23 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing. curing and polishing etc. all complete as specified and as directed by the Engineer-in- Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or |
| 24 | Providing round/half round moulding/nosing over edge of marble/granite work or kota stone etc. duly polished in mirror finish as per the direction of Engineer-in-Charge complete including carriage of materials within all leads and lifts |
| 25 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth In Cement Mortar 1:6 (1Cement:6 Sand).including carriage of materials within all leads and lifts |
| 26 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 27 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts. |
| 28 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts |
| 29 | Painting wood work with Deluxe Multi Surface Paint of required shade One or more coat applied of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 30 | Providing and fixing 110mm X 75mm size PVC Finolex type \\"A\\" floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads an lifts. |
| 31 | Providing and fixing wall ceiling floor CPVC pipe (heavy duty) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials within all leads and lifts :- a) 15mm nominal bore |
| 32 | Providing and fixing high pressure PVC Finolex (Type-B) spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc. complete including carriage of materials within all leads and lifts110mm |
| 33 | Providing and fixing PVC finolex (Type-B) Plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts 110mm |
| 34 | Providing and fixing PVC finolex (Type-B) Collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts 110mm |
| 35 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P or S trap, complete in all respect as per directions of Engineer-in-Charge. HINDWARE MAKE |
| 36 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- including carriage of materials within all leads and lifts |
| 37 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts |
| 38 | Providing and fixing C.P. / S.S. health faucit with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge .including carriage of materials within all leads and lifts. |
| 39 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.including carriage of materials within all leads and lifts HINDWARE MAKE |
| 40 | Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers including carriage of materials within all leads and lifts :-Solid Type :-White plastic seat and cover |
| 41 | Providing and fixing 550mmx400mm flat back vitreous China wash basin with pedestal and brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts HINDWARE MAKE |
| 42 | Providing and fixing stainless steel kitchen sink 610mm X 510mm with bowl depth 200mm size with drainage board of approved make with C. I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts |
| 43 | Providing & fixing 32mm dia, PVC waste pipe for wash basin or sink including carriage of materials within all leads and lifts |
| 44 | Providing and fixing 45cm length UPVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts. |
| 45 | Providing and fixing Wall mixer telephonic arrangement including connection fitting complete in all respect of make complete including carriage of materials within all leads and lifts HINDWARE MAKE |
| 46 | Providing and fixing 15mm hand shower with angular and rest holder including carriage of materials within all leads and lifts |
| 47 | Providing and fixing Kitchen sink mixture including carriage of materials within all leads and lifts:- including carriage of materials within all leads and lifts. Cera/Hindware make |
| 48 | Providing and fixing single hole basin mixer with with top / bottom swinging spout of approved quality including carriage of materials within all leads and lifts HINDWARE MAKE |
| 49 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts |
| 50 | Providing and fixing CP Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.645 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.including carriage of materials within all leads and lifts |
| 51 | Providing and fixing CP Brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials within all leads and lifts |
| 52 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. including carriage of materials within all leads and lifts |
| 53 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. including carriage of materials within all leads and lifts |
| 54 | Providing and fixing charomium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts |
| 55 | Providing and fixing 3 in 1 angular corner acraylic glass shelf with C.P. brass bracket and guard rail complete, fixed to wooden/rawl plugs with C.P. brass screws etc. complete including carriage of materials within all leads and lifts |
| 56 | Providing and fixing 15 mm C.P brass pillar tap with capstan head Long body including carriage of materials within all leads and lifts. HINDWARE MAKE |
| 57 | Providing and fixing 15mm dia C.P.brass Angle cock of approved quality including carriage of materials within all leads and lifts. HINDWARE MAKE |
| 58 | Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts. HINDWARE MAKE |
| 59 | Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender