Tender For Repair/Renovation To Various Resi Qtr. At Brock Hurst Shimla-2.(Sh:-Providing And Fixing Wall Panelling,Renovation And Painting In Type-Iv Set No-1 At Brock Hurst ).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2026
5 days left
EMD
3360
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation To Various Resi Qtr. At Brock Hurst Shimla-2.(Sh:-Providing And Fixing Wall Panelling,Renovation And Painting In Type-Iv Set No-1 At Brock Hurst ).
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead For thickness of tiles upto 25mm |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 5 | Taking out and Refixing doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 6 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 7 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 8 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete.1 8 mm thick |
| 9 | Providing and laying rectified Glazed Ceramic floor tiles sqm of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 10 | Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor:- a) 15mm nominal bore |
| 11 | Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting (a) Readymixed paint brushing wood primer pink. |
| 12 | Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping |
| 13 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. A) 125 mm |
| 14 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm |
| 15 | Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. A) 200x10mm |
| 16 | Providing and fixing bright finished brass handles with screws etc. complete i) 100mm |
| 17 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) |
| 18 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) i) 6mm thick |
| 19 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) |
| 20 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 21 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete.1st class Indian teak wood. |
| 22 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete. |
| 23 | Providing and fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating without vent arm complete including cost of cutting and making goods the walls and floors :-75mm nominal diameter |
| 24 | Providing and fixing high pressure PVC spigot and socket ,waste and ventilating pipes ISI marked including fixing with approved adhesive etc.complete. a) 110mm dia. |
| 25 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc.complete. a) 110mm dia. |
| 26 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc.complete. a) 110mm dia. |
| 27 | Providing and laying marble work (table rubbed and polished) with semi round nosing in flooring laid over 20mm (Twenty milimetres) thick base in 1:3 (One cement : three sand) including jointed with cement mortar 1:2 (one white cement :two marble dust) with an admixture of pigment to match the shade of marble 20mm (Twenty milimetres) thick Green marble within all leads, lifts of materials and other incidentals. |
| 28 | Providing and fixing viterous China Hind ware IS marked IS No. 2556 or equivalent wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting complete including carriage within all leads, lifts of materials and other incidentals :-Flat back :-550 X 400 mm (five hundred fifty into four hundred milimetre) |
| 29 | Providing and fixing 32 mm (thirty two milimetre) dia C.P. brass waste for wash basin or sink complete within all leads, lifts of materials and other incidentals. |
| 30 | Providing & fixing 32 mm (thirty two milimetre) dia, PVC waste pipe for wash basin or sink including check nut complete within all leads, lifts of materials and other incidentals. |
| 31 | Providing & fixing 100 mm (one hundred milimetre) dia, C.P. grating complete within all leads, lifts of materials and other incidentals. |
| 32 | Providing and fixing looking mirror of superior glass with plasitic frame complete within all leads, lifts of materials and other incidentals. |
| 33 | Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete including carriage within all leads, lifts of materials and other incidentals :-600 X 20 mm (six hundred into twenty milimetre) |
| 34 | Providing and fixing Acrylic shelf with C.P. brass bracket and guard rail complete, fixed to wooden plugs with C.P. brass screws within all leads, lifts of materials and other incidentals. |
| 35 | Providing and fixing 15mm (fifteen milimetre) dia CP brass bib tap with capstan head complete within all leads, lifts of materials and other incidentals. |
| 36 | Providing and fixing 15mm (fifteen milimetre) dia C.P.brass angle valve without nuts and pipe complete within all leads, lifts of materials and other incidentals. |
| 37 | Providing and fixing PVC connection pipe with brass union complete within all leads, lifts of materials and other incidentals. :-45cms (forty five centimetres) length :-15mm (fifteen milimetre) nominal bore. |
| 38 | Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) . |
| 39 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):- |
| 40 | Providing and fixing 25mm diameter Power coated curtain rods with brackets and golden plugs etc. where ever required. |
| 41 | Providing and fixing aluminium eye hooke etc. where ever required. complete within all leads, lifts of materials and other incidentals. |
| 42 | Providing and fixing C.P. brass towel ring complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete including carriage within all leads, lifts of materials and other incidentals . |
| 43 | Providing and fixing Chromium plated brass soap dish with C.P. brass brackets fixed to wooden plug with C.P. brass screws including carriage of material |
| 44 | Providing and fixing wall mixer complete within all leads, lifts of materials and other incidentals. |
| 45 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) i) 9mm thick |
| 46 | Providing and fixing Tringular edges cover fillets (corner) 50mm section i/c mitring at junctions with wood screws and nails complete.1st class Indian pine wood. |
| 47 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 48 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. |
| 49 | Painting one coats(excluding priming coat) on previously painted wood and wood based surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters sand papering and stopping including carriage of materials in all leads and lifts. With enamel paint |
| 50 | Painting one coats(excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matters:With enamel paint |
| 51 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : Old work (one or more coats) |
| 52 | Providing and fixing Pine wood readymade plain framed panelling with necessary screws priming coat on unexposed surface etc. complete. with.pine wood. |
| 53 | Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler. |
| 54 | Providing and fixing 1.50mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of materials within all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender