Tender For Civil Renovation And Modification Works Phase -Ii At Shed S60, South Site, Barc, Trombay, Mumbai-400085.
Tender Value
95.10 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
21 days left
EMD
2.24 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil Renovation And Modification Works Phase -Ii At Shed S60, South Site, Barc, Trombay, Mumbai-400085.
BOQ
| Sl. No. | Item Description |
| 1 | Aluminium Composite Metal PanelDesigning, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) |
| 2 | Providing and fixing anodized aluminium work Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) |
| 3 | Extra for colour anodizing |
| 4 | Aluminium grillProvidng and fixing Aluminium Grill 10 mm thick \\"DECO GRILLE\\" make Model No. DG- 202 in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. |
| 5 | Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge |
| 6 | Structural SteelProviding Structural steel work using angles, channels, joists, MS plates and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, MS plates and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials |
| 7 | M.S Plain Plates and chequrred Plates Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials produced by the own plants of SAIL , RINL (Vizag Steel) and TATA only using virgin materials. All test reports to be provided along with the supply of the materials |
| 8 | Reinforcement SteelProviding Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor Using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor from the own plants of SAIL, RINL or TATA make only using virgin materials |
| 9 | Reinforced Cement Concrete (RCC) M-30Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level. |
| 10 | PCC 1:1.5:3Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement. |
| 11 | Extra for RCC& PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants . |
| 12 | Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Super structure. |
| 13 | 50 mm thick cement concrete flooringProviding and laying 50 mm thick cement concrete flooring with concrete hardner topping under layer 38 mm thick cement concrete 1:2:4 and top layer 12 mm thick wearing surface with metallic floor hardner, cement being mixed with metallic floor hardner of approved quality and make in the ratio of 4:1 (4 cement and 1 metallic floor hardner) by weight and this cement hardner compound mixed with 6 mm down graded stone aggregate in the ratio of 1:2 by volume including providing and fixing 25 X 3 mm aluminium strip,This includes cost of cement slurry, finishing to the required finishing and cleaning neatly while handing over the areas etc. complete as per specifications and drawings. |
| 14 | Brick workProviding and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.\\" |
| 15 | 15 mm thick internal plasteringProviding 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge |
| 16 | Providing and fixing shear connectors for structural repairing of beam/ Column using following methods; 1.Cleaning the worn out portions of the RCC member with wire brush. 2.Cleaning the reinforcements properly with wire brush and applying a coat of Nitozinc Primer or equivalent to protect the reinforcements. 3.Drilling holes of 12mm dia for fixing shear connectors of 8mm or 10mm dia with Hilti Chemical anchors at a spacing of 150mm c/c includes Cleaning the holes and fixing 8mm or 10mm dia shear connectors make using Epoxy chemical mortar of HILTI HIT RE500/HY200 make or equivalent make to be approved by EIC as required at site and as per instructions of EIC including all machineries, labour, consumables, tools and tackles etc with safety precautions etc. complete. |
| 17 | 3.00 mm thick PVC sheet / tile in flooringProviding and Fixing 3.00 mm thick Homogeneous PVC sheet / tile in flooring and skirting of aproved make in approved pattern on a smooth and damp prrof base using rubber based adhesive of approved quality and manufatrer like Dunlop-S -758, Fevicol SR 998, PolyGrip SP or equivalent including levelling small undulations with plasterof paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade. Note Item also includes cost of removing existing laid pvc flooring and disposing the old flooring to the nearest disposal point within 100m lead. |
| 18 | Micro concreteProviding SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-chargeUsing 100% SFMC |
| 19 | Structural repairsProviding structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) |
| 20 | G.I. chicken meshProviding and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured) |
| 21 | 6.00 mm thickness clear float glass Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) |
| 22 | Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters |
| 23 | Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters |
| 24 | Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width |
| 25 | General steel door General steel single shutter door (G.I.) for wall opening 1050MM (Width)X2200MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per given technical speicifications and as directed by Engineer in charge. Providing and fixing of Hollow metal doors (Single leaf /Double leaf) fully panelled and/or with partly louvered and/or vision panel as per site requirements. Doors shall confirm IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with given specifications. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thickness and shutter skin thickness of 1.20mm minimum thick galvanized steel sheet. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. Item also includes supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per Clause of technical specifications.and as directed by Engineer in charge. |
| 26 | General steel single shutter door (G.I.) with louvers for wall opening 1200MM (Width)X2200MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per given technical speicifications and as directed by Engineer in charge. |
| 27 | General steel double shutter door (G.I.) for wall opening 1650MM (Width)X2200MM (Height) approximately with louver opening including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per given technical speicifications and as directed by Engineer in charge. |
| 28 | General steel double shutter door (G.I.) with louvers for wall opening 1900MM (Width)X2200MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per given technical speicifications and as directed by Engineer in charge. |
| 29 | General steel double shutter door (G.I.) for wall opening 1900MM (Width)X2700MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per given of technical speicifications and as directed by Engineer in charge. |
| 30 | General steel double shutter door (G.I.) with panic bar arrangement for wall opening 2000MM (Width)X3000MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per given technical speicifications and as directed by Engineer in charge. |
| 31 | Open type limit switchesSupply & Installation of open type limit switches suitable for emergency doors conform to standards - Electro mechanical control switches IS: 13947-5-13 & IFC: 947-5-1-3. model no: 3SE3 023 - 3A with 21mm long plunger and repeat plunger for tandem arrangement etc.. complete as per technical specifications & as directed by EIC at site. |
| 32 | Mortise latchProviding and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications. |
| 33 | Tower boltsof size 300 X 12 mmProviding and fixing stainless steel tower bolts of size 300 X 12 mm of approved make with necessary screws etc. all as per specifications and as per drawings. |
| 34 | S.S. butt hingesProviding and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight)\\" GARG' or equivalent approved make with suitable stainless steel screws etc. complete |
| 35 | Stainless steel \\"C\\" type door handlesProviding and fixing pair of stainless steel \\"C\\" type door handles 19 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete. |
| 36 | Key less latchProviding and fixing \\"Godrej\\" make mortice Key less latch with chrome or Powder Coated finish and a pair of lever handles with necessary screws etc complete in all kind of airlock, bath / toilet Doors / false ceiling trap doors. |
| 37 | Mortice lock for aluminium doorProviding and fixing approved Ramson/ Godrej make Mortice lock 4 lever with necessary screws, to the Aluminium doors as per specifications including all materials, labour etc. and as directed by the Engineer- In- Charge. |
| 38 | Universal hydraulic door closerProviding and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts \\" Everite/ Hardwyn/Godrej\\" or approved equivalent make complete as per specifications and as directed by the project Engineer. |
| 39 | Granite workProviding and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels.Note: cost moulding and polishing of granite edges as per required by EIC is included in the item. |
| 40 | Closing opening in brickwork upto 1.00 SqMProviding and constructing brick work for closing opening in brickwork upto 1.00 SqM in cement mortar using standard bricks including 15mm thick plastering on both faces using readymix plaster , curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge |
| 41 | Providing and Fixing Anchor Fastner HST4 Wedge anchor Type (Stud anchor HST4 M12x145) i.e.12 MM diameter 145 mm Long of HILTI or as approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings.. |
| 42 | Providing and Fixing Anchor Fastner HST4 Wedge anchor Type (Stud anchor HST4 M10x130) i.e.10 MM diameter 130 mm Long of HILTI or as approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. |
| 43 | Miscellaneous civil worksCarryiing out Miscellaneous civil works by providing suitable unskilled plumber/mason with valid police verification certificate for entire contract period. Item includes providing set of necessary hand tools, etc required for civil maintenance works for entire period of contract. NOTE: Suitable manpower shall be deployed for the job assigned with safety gears as & whenever required. workforce shall be deployed as per requirement, including holidays & late working if required. |
| 44 | Epoxy painting on plastered/concrete surfaceProviding and Painting with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer , preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficiant water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any,scaffolding etc. complete.all as per manufacturers Technical Data and as directed at site to acheive 200 micron dry film thickness (50 micron primer coat and 150 micron finishing coat). ON CONCRETE/PLASTERED SURFACES |
| 45 | Epoxy PU paint On STEEL surfacesProviding and Painting with Epoxy PU paint using 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of EPILUX-13 High Build primer of 50 micron thickness over steel surfaces at all locations prepared and applied as per manufacturer' specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat). On STEEL surfaces |
| 46 | White cement based wall puttyProviding and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge |
| 47 | Exterior emulsion paint On Plain Plaster surfaces Providing and applying durable exterior emulsion paint formulated with engineered pure acrylics latex based on nanotechnology, with life of min. 10 (ten) years, having crack bridging ability up to 2.4 mm and superior anticarbonation & waterproofing properties, surface cross linking feature, high resistance to growth of algae, high Dust Pick Up Resistance (DPUR), resistance to fading of colours, protection against bird dropping, good washable property including the cost of materials, spray / roller application, labour, consumables, tool & plants/equipment etc. complete in all respect as per manufacturer’s specifications and as directed by the Engineer - in-Charge. Base coat (main waterproofing coat): minimum 2 (two) coats of fibre reinforced liquid applied membrane (to be applied before top coat) with allowable dilution as per Note below. Top coat: minimum 2 (two) or more coats of Organo-Silicon, UV Cross linking emulsion. Note : 1) Coverage for new surface (sand faced plaster): For Base Coat - approx. 40-45 sq.ft./litre with 1st coat of Base Coat with 30% dilution and 2nd coat of Base Coat with 10% dilution with potable water and for top coat - approx. 55-60 sq.ft./litre with 30-35% dilution with potable water only. 2) Coverage for old surface (sand faced plaster): for repainting on old surfaces, 1st coat of Base Coat with 30% dilution only on repair/patch work and 2nd coat of Base Coat with 10% dilution with potable water on overall surface - approx. of 40-45 sq.ft./Litre prior to 2 coats of top coat application i.e. with 35% to 40% dilution with potable water - approx. 55-60 sq.ft./Litre. 3) Warranty : Minimum 10 (ten) years' warranty against water proofing, paint performance and anti-algal properties. 4) Scaffolding will be paid separately under relevant Item. 5) The paint shall conform to international VOC specifications and shall not contain hazardous materials/ heavy metals / toxic materials. 6) Tentative / suggested make for guidance of bidder(s): For Base Coat - M/s Asian Paints Ultima Protek Duralife or equivalent and for Top Coat - M/s Asian Paints Ultima Protek or equivalent. |
| 48 | Double tubular scaffolding systemProviding and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding |
| 49 | Dismantling plain cement concreteDismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge |
| 50 | Demolishing C.C / R.C.C worksDemolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unserviceable materials separately including cutting reinforcement bars all as directed at site. |
| 51 | Dismantling brick workDismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 52 | Dismantling doors, windows Area 3.00 Sq.M and belowDismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) |
| 53 | Dismantling doors, windows of Area beyond 3.00 Sq.M Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Area beyond 3.00 Sq.M |
| 54 | Dismantling steel workDismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead |
| 55 | Dismantling partition/False ceiling workDismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing, cement asbestos, Celotax or other hard board ceiling or partiton walls at site including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge |
| 56 | Dismantling old plaster / skirtingDismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead |
| 57 | Lead chargesLead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc. Soil/tiles/debris/civil scrap excluding metal Note: The rates in respect of Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil/debis and @ 50% in respect of Rock from corresponding STACK / TRUCK Measurement |
| 58 | All types of metal/wooden scrap materials to BARC’s scrap yard situated at TV stores. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysAug 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender