Tender For Modification Of Internal Road And Construction Of New Security Gate At Aiims Mangalagiri
Tender Value
33.88 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
2 days left
EMD
67769
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Guntur → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Modification Of Internal Road And Construction Of New Security Gate At Aiims Mangalagiri
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 2 | All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Centering and shuttering including strutting, propping etc.and removal of form for : |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Make: Sail,VIZAQ,TATA) |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 10 | 1:6 (1 cement: 6 fine sand) |
| 11 | Finishing walls with textured exterior paint of required shade : (Make :- Asian Paints,Berger,Nippon) |
| 12 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 13 | Galvanized Iron steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved Zinc primer, including welding and bolted with special shaped washers etc. complete.(Make :- TATA,JINDAL,SAIL) |
| 14 | Hot finished welded type tubes |
| 15 | Providing and fixing Mincon-PU Spring Post Flexible Delineators (600 gms) made of high-quality polyurethane (PU) material with spring-back flexibility, weather-resistant and UV-stabilized, fitted with high-intensity reflective bands for enhanced visibility. The delineators shall be fixed firmly on the road surface with suitable anchor bolts and accessories, complete in all respects, at locations as directed by the Engineer-in-Charge.(Make :- 3M and Equilvalent) |
| 16 | Supplying and placing PVC Boom Barriers (4 Types) of approved quality and dimensions, made of durable, weather-resistant PVC material, complete with all necessary accessories and fittings, for traffic management and pedestrian safety. The barriers shall be placed at designated locations as directed by the Engineer-in-Charge, complete in all respects.(Make :- 3M and Equilvalent) |
| 17 | Providing Retro-reflective regulatory sign board of size 900 mm dia metre made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. |
| 18 | Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 19 | Supply, installation, testing and commissioning of automatic boombarrier suitable for 5.0m-7.5m road width for intensive applications,high speed with 4.5second opening time with Straight aluminium boom of minimum size 100mm x 70 mm, builtin blinker indicator Entry/Exit push buttons for manual open and closing of barrier etc. complete asrequired as per specifications & at site of work. (Make :- 3M and Equilvalent) |
| 20 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 21 | In cement mortar |
| 22 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender