Tender For Repair/Replacement Of Rusted External Water Supply Pipe Line, Pump/Motors, Sluice Valves And Misc Work At Artc & S Shokhuvi (Nagaland)
Tender Value
19.99 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
16 days left
EMD
40000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dimapur → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Rusted External Water Supply Pipe Line, Pump/Motors, Sluice Valves And Misc Work At Artc & S Shokhuvi (Nagaland)
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down old rusted / unserviceable DI/CI/GI tubing connection including disconnection of fittings from tubing where required and cleaning for refixing or removal from site complete as directed by Engr-in-Charge of following sizes :- |
| 2 | Old GI 25/32 mm bore |
| 3 | Old GI 40 mm bore |
| 4 | Old GI 90 mm dia |
| 5 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 25 mm ,including fittings . :- |
| 6 | - do - but outer dia 40 mm |
| 7 | - do - but outer dia 90 mm |
| 8 | Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore complete all as specified and directed. |
| 9 | - do - but outer dia 40 mm |
| 10 | S&F sluice valve cast iron both ends flanged class PN-1.6 conforming to IS-14846 with stainless steel spindle including joints & jointing materials (Rubber gasket, nut, bolts,washers etc) with removing old valve complete of following sizes |
| 11 | 150 mm bore |
| 12 | 100 mm bore |
| 13 | 80 mm bore |
| 14 | Supply and fix PVC/Gun metal foot valve ball type conforming to IS 4038 complete of following size all as per specified and directed by Engr-in-Charge. |
| 15 | 150 MM bore |
| 16 | 100 mm bore |
| 17 | 80 mm bore |
| 18 | Providing and fixing ball valve (brass) of 20 mm bore of approved quality, High or low pressure, with plastic floats complete |
| 19 | Providing and fixing ball valve (brass) of 25 mm bore of approved quality, High or low pressure, with plastic floats complete |
| 20 | Dismantling of u/s valve pit and M & L for construction of brick masonary valve pit chamber with 100mm thick, PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate, providing well burnt brick masonary wall of 23cm thick built in CM 1:6 rendering 15 mm thick in CM 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even, supply and fix 3.15 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame embbeded in PCC coping with locking arrangement and 1 No, 50mm size, 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron appplying two coats of synthetic enamel paint of approved shade over a coat of red oxide primer to all exposed steel surfaces making good all disturbed surface to match surrounding complete all as specified and directed of size 750mmx750mmx600mm (internal size) complete all as specified and directed. |
| 21 | M & L for preparation/cleaning of old painted steel surfaces of any description including electric motor pumps diesel engine driven pump set base plate its foundation including suction/deliver CI Pipe line upto ground level writing of SM No.etc all as per colour code or as directed. |
| 22 | Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair/rewinding, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity 40 HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge. |
| 23 | Disconnecting the electric connection of unserviceable centrifugal monoblock pump , transporting to work shop for repair, disconnecting the all electric & mechanic connection from pump with electric motor 3 phase, 415 volts, 50 c/s of capacity upto 12.5 HP of electric motor / submersible pump of any make from the set, rewinding the motor with super enamelled copper winding wire of existing gauge and size including all other winding material such as leatheriest paper, tapes, sleeves etc, Bush,'O' ring, Sand guard, water seal and suitable size bearing if required including varnishing, heating, drying and also repair/ replacement of spair parts of pump such as bowal busg, gun metal bush, neck ring and testing complete for smooth functioning and satisfied by Engineer-in-Charge & reassembling and re-fixing with true alignment and testing and commissioning complete all as specified & directed by Engineer-in-Charge. |
| 24 | M & L for excavation in any type of soil for detection of leakage of GI/PPR Pipe any size including breaking of PCC floor/ tiled surface of required area or removing PCC interlocking tiles or any type of flooring complete including returning filling in and removal of surplus mud / soil after taking out leaked water from pit not more than 1.5 m deep and making it dry for day to day external water supply complains complete all as specified and directed. Note : Rate is including earth work and all type of GI fitting like bends, elbows, union, sockets, reducer, welding work etc. as per site requirement. |
| 25 | Supply and fix in repair fully automatic star delta starter suitable for panel with voltmeter, ammeter and frequency meter digital type complete of following capacity with all as directed by engineer-in-charge(A) motor protection circuit. Make L&T, C&S / Schneider. |
| 26 | For 40 HP motor |
| 27 | For 12.5 HP motor Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender