Tender For Cutting Welding & Threading Work In Phed Sub Dn Didwana
Tender Value
12 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
0 days left
EMD
24000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagaur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Cutting Welding & Threading Work In Phed Sub Dn Didwana
BOQ
| Sl. No. | Item Description |
| 1 | Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concern's store own his cost. |
| 2 | 80 mm dia |
| 3 | 100 mm dia |
| 4 | 125 mm dia |
| 5 | 150 mm dia |
| 6 | 200 mm dia |
| 7 | 250 mm dia |
| 8 | 300 mm dia |
| 9 | 350 mm dia |
| 10 | 400 mm dia |
| 11 | Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concern's store own his cost. |
| 12 | 32 mm |
| 13 | 50 mm |
| 14 | 65 mm |
| 15 | 80 mm |
| 16 | 100 mm |
| 17 | 125mm |
| 18 | 150mm |
| 19 | Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department. |
| 20 | 32 mm |
| 21 | 40 mm |
| 22 | 50 mm |
| 23 | 65 mm |
| 24 | 80 mm |
| 25 | 100 mm |
| 26 | 125mm |
| 27 | 150 mm |
| 28 | 200mm |
| 29 | 250mm |
| 30 | Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. |
| 31 | At Workshop |
| 32 | On Site |
| 33 | Providing, Fabrication of Mild Steel Plane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. |
| 34 | Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate |
| 35 | Up to 12 mm) dia. Hole |
| 36 | Above 12 mm dia. Hole. |
| 37 | Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be provided and carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these to concern's divisional store own his cost. |
| 38 | 50 mm |
| 39 | 65 mm |
| 40 | 80 mm |
| 41 | 100 mm |
| 42 | Supplying of MS Rods for different sizes of sluice valve and should be supplied as according to size of old rods including material and finishing for the following sizes. |
| 43 | Sluice Valve Size 80mm |
| 44 | Sluice Valve Size 100mm |
| 45 | Sluice Valve Size 125mm |
| 46 | Sluice Valve Size 150mm |
| 47 | Sluice Valve Size 200mm |
| 48 | Sluice Valve Size 250mm |
| 49 | Sluice Valve Size 300mm |
| 50 | Sluice Valve Size 350mm |
| 51 | Sluice Valve Size 400mm |
| 52 | Supplying of Chuck Nut for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. |
| 53 | Sluice Valve Size 80mm |
| 54 | Sluice Valve Size 100mm |
| 55 | Sluice Valve Size 125mm |
| 56 | Sluice Valve Size 150mm |
| 57 | Sluice Valve Size 200mm |
| 58 | Sluice Valve Size 250mm |
| 59 | Sluice Valve Size 300mm |
| 60 | Sluice Valve Size 350mm |
| 61 | Sluice Valve Size 400mm |
| 62 | Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes. |
| 63 | Sluice Valve Size 80mm |
| 64 | Sluice Valve Size 100mm |
| 65 | Sluice Valve Size 125mm |
| 66 | Sluice Valve Size 150mm |
| 67 | Sluice Valve Size 200mm |
| 68 | Sluice Valve Size 250mm |
| 69 | Sluice Valve Size 300mm |
| 70 | Supplying of MS Rods and Chuck Nut (Complete Set) for different sizes of sluice valve and should be supplied as according to size of Check Nut including material for the following sizes. |
| 71 | Sluice Valve Size 80mm |
| 72 | Sluice Valve Size 100mm |
| 73 | Sluice Valve Size 125mm |
| 74 | Sluice Valve Size 150mm |
| 75 | Sluice Valve Size 200mm |
| 76 | Sluice Valve Size 250mm |
| 77 | Sluice Valve Size 300mm |
| 78 | Sluice Valve Size 350mm |
| 79 | Sluice Valve Size 400mm |
| 80 | Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm). |
| 81 | 2\\" dia. Size (50 mm) |
| 82 | 2 ½\\" size (65 mm) |
| 83 | 3\\" dia size (80 mm) |
| 84 | 4\\" dia size (100 mm) |
| 85 | Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D) including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm). |
| 86 | 2x2 ½ “ dia size (50 x 65 mm) |
| 87 | 2 ½ “x 3” dia size (65 x 80 mm) |
| 88 | 2”x 3” dia size (50 x 80 mm) |
| 89 | 3”x 4” dia size (80 x 100 mm) |
| 90 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.MS pipe specials up to 600mm dia (with minimum 5mmthickness sheet) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender