Tender For Road Furniture Work At Various Places In Area Jurisdiction Of Div-Iv. (Arc). 2902
Tender Value
49.22 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
98440
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Furniture Work At Various Places In Area Jurisdiction Of Div-Iv. (Arc). 2902
BOQ
| Sl. No. | Item Description |
| 1 | Item Code [2022 12.46.2]:Item Type [building] :: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on old work. |
| 2 | Item Code [2022/10.12]:Item Type [RUIDP] :: Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings |
| 3 | Item Code [2022/10.13]:Item Type [RUIDP] :: Sub Item Code [2022/10.13 + 2022/10.13.1]: Providing and erecting overhead signs with retro reflective Type IV sign plate fixed on angle iron frame with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans. Truss and Vertical Support |
| 4 | Item Code [2022/10.24]:Item Type [RUIDP] :: Supplying and fixing glow studs of size 100 X 20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylortrite) of ABS having electronically welded micro prismatic lens with abrasion resistant coating as approved by Engineer- in-charge. The glow stud shall support a load of 13635 kg. tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35+/ -5 degree to base. The panels on both sides with at least 12 cm of reflective areas up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM 1: 809 as recommended in BS : 873 part 4 : 1973 as per approved sample & manufactures by the Engineer-in-charge. |
| 5 | Item Code [2025 10.2 A]:Item Type [road] :: Sub Item Code [2025 10.2 A + (i)]: Providing and fixing of retro-reflectorised cautionary , mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1fixed over aluminium sheeting, 1.5mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600mm, 600mm below ground level as per drawings and MoRTH Specification Clause 801 900 mm equilateral triangle |
| 6 | Item Code [2025 10.3 (A) (ii)]:Item Type [road] :: Direction and Place Identification signs upto 0.9 sqm size board :: A. Retro-reflectorised Traffic Signs (ii) Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on 2 inch dia GI Pipe firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600, 600 mm below ground level as per approved drawing and and MoRTH Specification Clause 801,upto 0.9 sqm size board. |
| 7 | Item Code [2025 10.3 A (i) Retro-reflectorised Traffic Signs]:Item Type [road] :: Direction and Place Identification signs upto 0.9 sqm size board A. Retro-reflectorised Traffic Signs (i) providing and erecting direction and place identification retro reflector is edsign as per IRC:67 madeof encapsulated lens type reflective sheeting vide Clause 801.3.1. fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9 sqm supported on amild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and MoRTH Specification Clause 801. Direction and Place Identification signs upto 0.9 sqm size board |
| 8 | Item Code [2025 10.6]:Item Type [road] :: Painting on Steel Surfaces Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRTH Specification Clause 801 |
| 9 | Item Code [2025 Rd 10.10]:Item Type [road] ::Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801 Sub Item Code [2025 Rd 10.10 + 2]: Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801 Ordinary Kilometre Stone (precast) |
| 10 | Item Code [2025 Rd 10.10]:Item Type [road] ::Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801Sub Item Code [2025 Rd 10.10 + 3]: Kilometre Stone :: Reinforced cement concrete M 15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 801 200 m stone (precast) |
| 11 | Item Code [2025 Rd 10.11]:Item Type [road] :: Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MoRTH Specification Clause 807 |
| 12 | Item Code [2025 Rd 10.2 A]:Item Type [road] :: Sub Item Code [2025 Rd 10.2 A + 1]: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 900 mm equilateral triangle |
| 13 | Item Code [2025 Rd 10.2 A]:Item Type [road] :: Sub Item Code [2025 Rd 10.2 A + 2]: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 600 mm equilateral triangle |
| 14 | Item Code [2025 Rd 10.2 A]:Item Type [road] :: Sub Item Code [2025 Rd 10.2 A + 3]: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 600 mm circular |
| 15 | Item Code [2025 Rd 10.2 A]:Item Type [road] :: Sub Item Code [2025 Rd 10.2 A + 4]: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 800 mm x 600 mm rectangular |
| 16 | Item Code [2025 Rd 10.2 A]:Item Type [road] :: Sub Item Code [2025 Rd 10.2 A + 5]: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 600 mm x 450 mm rectangular |
| 17 | Item Code [2025 Rd 10.2 A]:Item Type [road] :: Sub Item Code [2025 Rd 10.2 A + 6]: Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 801.3.1, fixed over aluminium sheeting, 1.5 mm thick supported on GI pipe 50 mm dia firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and MoRTH Specification Clause 801 600 mm x 600 mm square |
| 18 | Item Code [NH PWD BSR CIRCLE UDAIPUR 8.19]:Item Type [Other] :: Solar Raised Pavement Markers: As per ASTM D 4280 & ASTM D 788 Supply & Installation of Solar Raised Pavement Markers made of Aluminium Alloy Body with Squre shape, solar powered, LED self illumination in active mode. The solar stud marker shall support a load of 25000 kg tested in accordance to ASTM D 4280. The marker should be resistant to dust and water ingress according to lS:12063:1987 standard and should withstand temperatures in e of 10°C to 75°C. Color of lighting could be provided in red or yellow (amber) as per requirement and typical frequency blinking is 2Hz. There should be super bright LEDs (one gach side with over 5000 (Milicandle) luminous intensity) and its visibilty should not less than l000meter distance in night. The Height, width and length of the marker shall be less than 20mm,125mm, 125mm and it should have one cylinder type shank 30mm + / - 2mm and length of shank should be 60mm +1-5mm. Fixing will be by drilling holes on the road for the shanks ,to go |
| 19 | Item Code [Rd-2025 Road Markers 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\\" C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements |
| 20 | Item Code [road 2022 8.15]:Item Type [road] :: Road Delineators (Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.) |
| 21 | Item Code [road 2025 10.19]:Item Type [road] :: Providing and fixing of road stud 100 x100 mm die cast in aluminium ,resistant to corrosive effect of salt and grit ,fitted with lense reflectors,installed in concrete or asphaltic surface by drilling holes 30mm up to a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar ,all as per BS:873 (Part 4) 1973.as per MoRTH Specification Clause 804. |
| 22 | Item Code [SOR 2022 10.25]:Item Type [RUIDP] :: Providing and fixing “L” type bollard 135cm height made out of 1.25mm thick M.S. sheet welded in conical section having upper dia 15cm and lower dia 20cm with another attachment of 150x150x7mm thick plate and hold fast at bottom, whole body is painted in white stove enamel and red reflective 3 band, each of 7.5cm and one reflective sheet of 15cm dia provided to it complete in all respect including all material, labour, diversion |
| 23 | Item Code [SOR 2022 10.26]:Item Type [RUIDP] :: Providing and fixing “SWISS” type bollard 134cm height made out of 1.25mm thick M.S. sheet welded in conical section having upper dia 15cm and lower dia 20cm with another attachment of mandatory 7mm thick plate and fixed with the help of 7cm long, 30cm dia chrome plated MS tube, this part is fixed on the body with another attachment of a cap 30x7cm, whole body is painted in black stove enamel and mandatory plate in azure blue with one compulsory keep left arrow with 10mm border reflective strip each of 7.5cm on body complete in all respect including all material, labour, diversion. |
| 24 | Item Code [UNFIED 10.23]:Item Type [road] :: Providing and fixing PVC Bump Speed Breakers size 350 mm x 250 mm x 50 mm fitted with key hooks complete with labour material and traffic diversion arrangements Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender