Tender For Provn Of Approach Road And Associated Work Between Deer Park And Pump House No. 02 At Af Stn Memaura
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2026
13 days left
EMD
19300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Approach Road And Associated Work Between Deer Park And Pump House No. 02 At Af Stn Memaura
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soil complete all as specified and directed |
| 2 | M& L for rolling and consolidation of formation surfaces in cutting with vibratory power roller exc 8 tonne & n exc 12 tonne all as specified and directed. |
| 3 | M/L for soling (or sub base) of 150mm with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed. |
| 4 | M/L for 150mm thick (compacted) WBM in two layers with coarse aggregate(40mm to 63mm size) or of grading 3 (20mm to 50mm size) spread, rolled and consolidated to gradient and camber required with RR 8 to 10 ton complete all as specified and directed. |
| 5 | M&L for preparation of surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleaned surface with gunny bags or with compressor air blower to remove all loose dirt etc and applying evenly a priming coat with paving bitumen VG 10 grade @10 Kg/10 Sqm by mechanical sprayer etc complete all as specified and as directed. |
| 6 | M&L for putting premix bituminous macadam (consolidated thickness 75 mm or less) with crushed and graded stone aggregate mixed together with VG-30 graded paving bitumen (4% by weight of total mix) to meet the disired requirement as mentioned in Particular Specification, mixing bitummnious concrete in hot mixing plant, laying and spreading uniformly by means of mechanical paver and rolled and compacted to required gradient and camber by 8 to 10 ton vibratory road roller complete all as specified and directed. |
| 7 | M&L for preparation of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleaned surface with gunny bags or with compressor air blower to remove all loose dirt etc and applying evenly tack coat with bituminous primer of grade VG-10 @5 Kg/10 Sqm by mechanical sprayer etc complete all as specified and as directed. |
| 8 | M&L Bituminous premixed semi dense asphaltic 40 mm thick (consolidated thickness) with 5.5 % binder content by wt of total mix paving bitumen (VG-30) viscocity grade mixed in hot mix plant transported to site on tippers and laid with mechanical paver, and rolled to uniform smooth suface with 8 to 12 tonne capacity power roller and compacted to required camber and gradient and all directed and specified by Engineer-in-charge.Note :- (i)The mix design shall be got done from approved lab and got approved from GE/AGE(I) before commencement of work. |
| 9 | Supply and fix cat eye reflective type of ABS body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 10 | M&L for providing and laying 1.5mm thick hot thermoplastic road marking paint for Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide of white/yellow colour in uniform thickness with glass beads as per clause no 803 of MOST specification incl. cleaning of road surface, heating the material within specified temperature limit as marking with all arrangement required for proper completion of work all as directed. |
| 11 | M & L Hardcore of gauge n exc. 63 mm of broken bricks, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface. |
| 12 | M&L for 100 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor etc complete all as specified |
| 13 | M & L for sand filling in floors, spread levelled and rammed including watering and consolidating complete all as specified. |
| 14 | S&F for 80MM thick machine pressed precast concrete interlocking paver block coloured reflective type rubber moulded any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and pigment complete all as specified and as directed. |
| 15 | M&L for providing precast cement concrete 1:2:4 of type B-1 (using 20mm graded stone aggregate as in road side kerb stone/ apex stone and similar works set in cement mortar 1:4 complete all as specified and as directed. |
| 16 | M&L PCC type B-1,1:2:4 (20mm graded stone aggregate) as in coping, side kerbs, mud stops etc complete all as specified and directed. |
| 17 | M&L for applying two coats of exterior emulsion paint white or tint on walls/ road kerb stones including preparation of new surfaces complete all as specified and directed. |
| 18 | Excavatiion in trenches n exc 1.5m wide and n exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. |
| 19 | M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete. |
| 20 | M&L for PCC 1:2:4 50mm thick type B1 using 20 mm graded stone aggregate as in sub base floor complete all as specified and directed. |
| 21 | M&L for reinforced concrete pipes, class NP3 laid and jointed complete with collars in 150 mm all as specified. |
| 22 | M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested bore dia of pipe 150mm in cement concrete type C-2(1:3:6) complete all as specified and directed. |
| 23 | M &L Brickwork with subclass B bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed. |
| 24 | Rendering 15 mm thick in cm 1:4 on fair faces of brick wall using water proofing compound @ 3% by weight of cement (WPC measure separately) |
| 25 | Supply only Integral Water Proofing Compound. |
| 26 | M & L for reinfocrced cement concrete, type B-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) as in landings, cover slabs (for drain/manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete all as specified. (Note : Reinforcement shall be measured and paid seperately) |
| 27 | M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)all as specified and directed |
| 28 | S & F TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and includingmild steel wire(annealed) not less than 0.9 mm dia. |
| 29 | Returning filling in including spreading levelling watering and well ramming in layers n exc 25cm in each layer. |
| 30 | M&L for brick work with subclass B bricks straight or curved on plan exceeding 6 M mean radius, using old size bricks built in CM 1:6 Complete all as specified. |
| 31 | M & L for cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate in surface channel, and drain, complete all as specified. |
| 32 | M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed. |
| 33 | Removing of excavated materials to a distance exc 500 not exceeding 500 M and deposing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender