Tender For Special Repair To Various Qtrs At Nehru Enclave & Nehru Road(I.E Bunglow No 12 Nehru Road And Qtr No 34/2,35/1,36/2,37/4,41/1,44/2,46/3,46/4 Nehru Enclave) Under Ge (East) Lucknow.
Tender Value
1.41 Crore
Estimated cost
Bid Submission
03 Aug 2026
24 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Various Qtrs At Nehru Enclave & Nehru Road(I.E Bunglow No 12 Nehru Road And Qtr No 34/2,35/1,36/2,37/4,41/1,44/2,46/3,46/4 Nehru Enclave) Under Ge (East) Lucknow.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including racking out joints hacking for key scrubbing down with water etc all as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below and above ground level, all as directed. |
| 3 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles. |
| 4 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM (1:6) etc complete, all as directed. |
| 5 | M&L for with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 etc complete, all as directed. |
| 6 | M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) as in span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 7 | M&L for Readymix mixture of plaster in cement mortar 15 mm thick on fair faces of brick work of walls, finished even & smooth without using extra cement etc all as specified and directed. |
| 8 | M&L for Readymix mixture of plaster in cement mortar 10 mm thick on fair faces of brick work of walls, finished even & smooth without using extra cement etc all as specified and directed. |
| 9 | M&L for Readymix mixture of plaster in cement mortar 5 mm thick on fair faces of ceiling, finished even & smooth without using extra cement etc all as specified and directed. |
| 10 | Supply only integral water proofing compound, ISI Marked. |
| 11 | M&L for two coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification incl 1-2 mm thick birla white care putty complete all as specified. |
| 12 | M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification incl 1-2 mm thick birla white care putty complete all as specified |
| 13 | M&L for preparation of new plastered surrfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl wall care putty 1-2 mm thickness over plaster surface to prepare the surface even and smooth complete all as specified. |
| 14 | M&L for complete removal of old plastered surrfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl wall care putty 3 mm thickness over plaster surface to prepare the surface even and smooth complete all as specified. |
| 15 | M&L for preparation of newly plastered surfaces of ceiling &applying two coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification incl 1-2 mm thick birla white care putty complete all as specified |
| 16 | M&L for complete removal of old decorated plastered surfaces of ceilling and applying two coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification incl 1-2 mm thick birla white care putty complete all as specified |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd/directed by Engr-in-Charge. |
| 18 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.brushing neat cement slurry with 3 Kg of cement per sqm all as specified & as directed. |
| 19 | M& L for Vitrified tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm,n.exc 1 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. |
| 20 | All as per above but on vertical surfaces including 10mm thick plaser in CM 1:4 complete all as specified and as directed. |
| 21 | M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. |
| 22 | M&L for glazed ceramic tiles (coloured) 300x600 x 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and as directed. |
| 23 | M&L for glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 on brick or stone walls etc complete all as specified. |
| 24 | M&L for 50 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3). |
| 25 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc all as specified and directed. |
| 26 | M&L Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:6 complete all as specofied and directed by Engr-in-Charge. |
| 27 | Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as directed. |
| 28 | Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical Cement + of Nerolac Perma/STP/Asian Confirm to IS 2645 - 9103 as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Perma Butyl tape product of Nerolac Perma/ STP/Asian and grouting around the inserted pipes by porable grout as directed by Engr-in-Charge.(d) Make angle fillets by mixing sand cement and Nerolac Perma Hypercrete/STP/Asian on all corners.(e) Brushing two coats with high performance cementitious elastomeric two components water proofing coating of Nerolac Perma Super 2K/STP/Asian of thickness 1mm in two coats, Above treatment shall be giving upto height 15cm from bottom slab and allow it dry completely. Above material shall be confirm to below properties- 1. Bulk Density - 1.73g/cc, 2. Elongation - 100% as per ASTM D412 (Min) 3.Hydrostatic Pressure - 4bars as per ASTM D 7088, 4. Adhesion to concrete- Greater than 1.5N/mm2, 5. Crack Bridging ability as per AS/NZS 4548.5 Min 1mm. 6. DFT - 1mm in two coats. Seperation Layer- Providing & Laying 120 gsm non woven geo textile membrane over waterproofing coating to protect the coating prior the screed.(f) Providing PCC 1:2:4 type B-1 using 20mm graded stone aggregate mixed with intergral waterproofing compound Cement + of Nerolac Perma as per manufacturer instructions in sunken slab for making slope to wrap hole.(g) Fill the sanitary gaps with Nerolac PermaSIKA/Asian sealing compounds complete. |
| 29 | Providing PCC 1:7:12 type F-2 using 40mm graded stone aggregate in sunken slab . |
| 30 | Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. |
| 31 | Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. |
| 32 | Taking up or down steel water tubing and connections of 25mm bore, fixed in walls, ceiling, floors, trenches etc. all as directed. |
| 33 | M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls. |
| 34 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 35 | M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 36 | M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors. |
| 37 | S&F in repair vitreous china floor/wall hung WC with flushing cistern, UF seat cover, hinges, accessories set of size 375 x 650 x 800/370 x 645 x 810 mm fixed to wall/floor with P/S trap complete as per manufacture's instructions all as specified and directed. |
| 38 | S & F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. |
| 39 | S & F in repair PVC low level flushing cistern of 10 ltrs capacity with dual push button inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete of all as specified and directed |
| 40 | S&F in repair vitreous china wash hand basin, pedestal type white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified. |
| 41 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of SS (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) |
| 42 | S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete, all as directed. |
| 43 | S&F SS grating 125mm dia with waste hole |
| 44 | S&F SS grating 100mm dia without waste hole |
| 45 | S&F in repair PVC connection 450 mm with wire braided long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete, all as specified. |
| 46 | S&F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 47 | S&F in repair 15 mm dia chromium plated fancy type angle valve pipe with capstan head long screwed shank including cp cover plate etc all as specified and directed. |
| 48 | S&F in repair 15 mm bore CP brass Central Hole Basin mixture fixed to GI pipe.complete all as specified and directed. |
| 49 | S & F in repair 15 mm bore brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe etc complete all as specified and directed. |
| 50 | S&F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified. |
| 51 | S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc complete set of superior quality all as specified and directed. |
| 52 | S&F in repair CP shop dish fancy type fixed with SS screw on wall etc all as specified and directed. |
| 53 | S&F in repair toilet paper holder CP fixed complete all as specified and directed. |
| 54 | S&F in repair PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed. |
| 55 | S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete, all as specified and directed. |
| 56 | Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 57 | S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60 cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified. |
| 58 | S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified. |
| 59 | S&F in repair 5 mm thick bevelled edge mirror of selected quality mounted mounted on 6 mm thick glass and fixed to 50 mm long chroumium plated brass spacer complete all as specifed and directed. |
| 60 | S&F (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 61 | S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified. |
| 62 | S & F in repairs PVC floor trap/nahani trap plan with grating of 100 mm size including jointing to waste pipe with cement joints etc complete as directed |
| 63 | Disconnecting existing tanks, exc 250 Ltr & n.exc 500 Ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position.(Cleaning repairing, etc. measured separately) |
| 64 | Dismantling PVC water tanks and removing for capacity exceeding 250 litres & not exceeding 500 litres etc all as directed. |
| 65 | S&F 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed. |
| 66 | Dismantling PVC water tanks and removing for capacity exceeding 500 litres & not exceeding 1000 litres etc all as directed. |
| 67 | S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete, all as specified and directed. |
| 68 | S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, all as specified. |
| 69 | S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, all as specified and as approved by GE/Engineer-in-Charge. |
| 70 | S&F in repair 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed |
| 71 | S&F in repair 25 mm dia stainless steel curtain rods including brackets and fancy type end knobs, complete all as specified and directed. |
| 72 | Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc |
| 73 | S&F 110 mm PVC (SWR ) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified |
| 74 | All as per item No 73 above but fixed on wall |
| 75 | S&F 75 mm PVC (SWR ) pipe single socketed in any length with rubber ring joint fixed to wall all as specified |
| 76 | S&F 75 mm PVC (SWR ) pipe single socketed in any length with rubber ring joints laid in trenches or in floors all as specified |
| 77 | S&F 110 mm PVC (SWR ) Bend any radius all as specified |
| 78 | S&F 75 mm PVC (SWR ) Bend any radius all as specified |
| 79 | S&F 110 mm PVC (SWR) branch piece, single (single Y ) equal or unequal. |
| 80 | S&F 75 mm PVC (SWR) branch piece, single (single Y ) equal or unequal. |
| 81 | S&F 110 mm (SWR) junction single (Single T) equal or unequal |
| 82 | S&F 75 mm (SWR) junction single (Single T) equal or unequal |
| 83 | M&L PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement |
| 84 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each, complete, all as specified & directed. |
| 85 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each complete all as specified & directed. |
| 86 | Taking down shutters exc 1.0 sqm but not exc 2.0 sqm each and refixing in same opening etc all as specified and directed. |
| 87 | Dismantling of boarding, any description ,fixed in any position with screws etc all as specified and directed. |
| 88 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast, back filling of chowkhat etc complete all as specified and as directed. |
| 89 | S& F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 90 | S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 91 | S&F 30 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side ISI marked with decorative laminative and SST beeding complete all as specified & directed. |
| 92 | Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, divided in 8 panes open rebated and prepared to receive glass, gauze etc ( with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed. |
| 93 | S&F powder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 94 | S&F powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium sanp beading screw , anodised aluminium fittings such as peg stays 150 mm long (01 Nos) hinges type B-21 100 mm long (2 Nos) suitable handles (1 no) complete all as specified. |
| 95 | S&F 4 mm thick forsted glass ordinary quality and glazing with aluminium beading in square n. exc 0.50 Sq.m in each pane complete all as specified and as directed. |
| 96 | Providing & fixing of windows made of pre- painted steel (base steel as per IS 513 of 0.58 mm thick \\"D\\" quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Secion for outer frameshould be of 72x55 mm, centre mullion should be of 72x50 mm, section for fixed glass beading should be of 12x12 mm and section for shutter should be 52x25mm. Outer frame & mullion sections to have rebate for glazed shutters fly mesh and 20 mm provision for guard bars/grills fly mesh shutter section should be of 20x20 mm. The sections are to be cut cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion ca. Elixier or equivalent stay. handles 2 nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mess for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonary wall by means of self-expanding, screws. including 10 mm square guard bars with 6\\" (152.4 mm) pitch, complete for finished item of work including of all taxes |
| 97 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge |
| 98 | Factory made solid panel PVC door shutter pralam 30mm thick (style) feather edge consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 99 | S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified. |
| 100 | S&F aluminium handle, 150mm size, 12 mm dia cast type, anodized (ISI marked) complete all as specified. |
| 101 | S&F 200 mm long 12 mm dia aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified |
| 102 | S&F 300 mm long 16 mm dia aluminium alloy anodised sliding door bolts, with hasp staple (Bolt type) and fixing clips ofsheet cast or extruded sections and fixing bolts and slinding bolts of extruded sections or cast - aluminium alloy and fixed complete, all as specified. |
| 103 | S&F mild steel helical door spring (Superior quality) 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified. |
| 104 | S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed |
| 105 | S&F Eye door viewer (Magic Eye) of suitable size fixed with paneled door shutter complete all as specified and directed. |
| 106 | S & F in repair 300mm long Stainless steel six peg hanger chromium plated as approved by Engr-in-charge complete all as specified and directed. |
| 107 | S&F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including welding work complete all as specified & as directed. |
| 108 | Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads. |
| 109 | S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete, all as specified. |
| 110 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified. |
| 111 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples all as specified. |
| 112 | M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified. |
| 113 | M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified. |
| 114 | M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. |
| 115 | M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint all as specified & as directed. |
| 116 | S&F ball catches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed |
| 117 | Demolition of reinforced cement concrete in floors ,beams ,chajjas,landing slab in any position or height and similar suspended works complete all as specified and directed. |
| 118 | M/L RCC 1:2:4 type B1 nominal mix (using 20 mm graded aggregate) as in slab etc complete all as specified. |
| 119 | Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick complete all as specified. |
| 120 | M&L TMT bar 8 to 10mm dia and over, cut to length, bent or shape required, including cranking, bending , hooking ends and binding with and including mild steel wire(annealed not less than 0.9mm dia) including welding,rivetting etc complete all as specified. |
| 121 | Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiselling, de rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed. |
| 122 | M&L for in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work as kitchen cabinet and cub board incl 6 mm thick wooden beading on edge and complete fittings (Stainless steel handle 125 mm, piano hinge,) complete, all as specified & directed. |
| 123 | S & F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed. |
| 124 | Dismantling wrought iron mild steel wk of any description not otherwise provided for etc |
| 125 | S&F IInd class HW plain,solid,straight and framed wrought,framed rebated,on the solid rounded or completed but together with gue pinned complete all as specified & directed |
| 126 | M&L 2nd class HW Plain fillets. square, rectangular or triangular in section, clean sawn, secured with screws or brads. Exc 6 & nexc 13 sqcm complete all as sp |
| 127 | Supply and fixed in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 128 | S&F in repair 32 mm dia of discharge pipe bottel trap of PTMT having minimum water seal of 25 mm .(Minimum weight 32 mm -260 gms/40 mm-270 gms) etc all as specified and directed. |
| 129 | S&F in repairs long body 15mm bore two-way bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed. |
| 130 | Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removing the same to the places where directed by Engr-in-Charge. |
| 131 | M&L plain cement concrete 1:2:4 type B1 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by engr-in-charge at site. |
| 132 | M & L 15 mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces on other than fair face surface finished even and smooth without using extra cement using waterproofing compound fair (on roof top) and complete all as specified. Please Enable Macros to View BoQ information |
| 133 | M & L 15 mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces on other than fair face surface finished even and smooth without using extra cement using waterproofing compound fair (on roof top) and complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender