Tender For Special Repairs To Building Nos P-39, P-40 And P-41 Of Scientists Hostel At Nstl Under Age (I) Nstl Visakhapatnam
Tender Value
1.59 Crore
Estimated cost
Bid Submission
03 Aug 2026
23 days left
EMD
2.34 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Building Nos P-39, P-40 And P-41 Of Scientists Hostel At Nstl Under Age (I) Nstl Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | =B2& \\" BoQ\\" BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CHIEF ENGINEER (R&D) SECUNDERABAD Name of Work: SPECIAL REPAIRS TO BUILDING NOS P-39, P-40 AND P-41 OF SCIENTISTS HOSTEL AT NSTL UNDER AGE (I) NSTL VISAKHAPATNAM Contract No: CERD/VIZ/TOKEN/12 OF 2026-2027 Bidder Name : PRICE SCHEDULE( This BoQ template must not be modified / replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # SlNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder Rs. Ps. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes Total Amount Total Amount in Words |
| 2 | Cutting / chipping the spalling concrete surfaces of columns, beams, slabs, cantilevers etc., and trimming, cleaning the surface to receive guniting / plastering complete all as specified and directed. |
| 3 | M&L for applying epoxy treatment for bonding new & old concrete surfaces prior to guniting applying NITO BOND AR chemical (FOSROC chemical ) or equivalent in STP, Sika complete all as specified and directed. |
| 4 | M&L for Providing pressure guniting averaging 40 mm thick in cement mortar 1:3 for columns/ fins including providing double scaffolding as required and removal of the same on completion of the work complete all as specified and directed. |
| 5 | M&L for Providing pressure guniting averaging 30 mm thick in cement mortar 1:3 for beams including providing double scaffolding as required and removal of the same on completion of the work complete all as specified and directed. |
| 6 | M&L for providing pressure guniting averaging 20 mm thick in cement mortar 1:3 for soffits of slab, complete all as specified and directed including providing double scaffolding as required and removal of the same on completion of the work complete all as specified and directed. |
| 7 | M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement including taking down old plaster complete all as specified and directed. |
| 8 | M&L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 9 | M&L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc and applying one coat of white wash, complete all as specified and directed. |
| 10 | M&L for Water proofing treatment for terrace as following: (a) Remove the existing Tile and Weathering Course upto the mother slab cleaning the surface areas thoroughly so that free of all contaminants like dirt and laitance & to remove all the loose materials by various mechanical means. Removal of all surface imperfections, protrusions, loose concrete & filling of cracks using ShaliCrete Polymer Modified Mortar or equivalent in Sika, FOSROC in the ratio ShaliCrete : Cement : Sand (1 : 2 : 5 ). (b) Providing and making vata at the junction of the walls and the slabs using PMC mortar in the ratio of ShaliCrete : Cement :Sand (1:2:5) using ShaliSBR Latex as the bond coat or equivalent in Sika, FOSROC. (c) Correct all construction joints by grouting with ShaliGrout IP at 1 mapart and opening of joints in “V” cut groove and fill with PMC mortar, using ShaliSBR Latex as the bond coat or equivalent in Sika, FOSROC. |
| 11 | (d) Supply and application of ShaliUrethane LHM single component, PU water proofing coating having 700% elongation with the help of brush or rollers by thoroughly mixing with a power mixer @ 1.2 to1.4 Kg / m² in two coats sandwiched with GF mesh / Geotextile Fabric including surface preparation. Broad casting of 100 mesh sieved sand to be done on the top coat to facilitate adhesion ofnext layer. The elastomeric membrane having these properties:Tensile Strength, 28 days, MPa (ASTM D-412): 2; Adhesion toConcrete, MPa (ASTM D-4541): 2.5; Crack Bridging Ability @ 9°C,mm (ASTM C-836): Upto 1.5. (e) Top Screed modified with Integral Waterproofing Chemical:Placing a seperation layer of 120 GSM geotextile fabric over thewaterproofing membrane and carrying out sloping screed on topof it over the with cement modified @ 0.4% with ShaliPlast LW+for waterproofing, or equivalent in Sika, FOSROC. |
| 12 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement including taking down old plastering complete all as specified and directed. |
| 13 | M&L for preparation of new plastered surfaces of walls and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm), complete all as specified and directed. |
| 14 | M&L for complete removal of existing treatment on surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorosent salts, trading oil and greasy spots and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (Two or more coats applied @ 1.43 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm), complete all as specified and directed. |
| 15 | Removing building materials etc. to a distance of exceeding 2.5 Km lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 16 | M&L for Rendering 15mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement, including taking down existing plaster complete all as specified and directed. |
| 17 | M&L for applying 3mm thick wall care putty on wall surfaces, including preparation of surfaces etc complete all as specified and directed. |
| 18 | M&L for Preparation of new surfaces and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 Gms/Litre of approved manufacturer of required shade and colour, complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment on old wall surfaces and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 Gms/Litre of approved manufacturer of required shade and colour complete all as specified and directed. |
| 20 | Dismantling of stone slab or tiles of any description in floors, aprons etc., laid bedded and pointed in any mortar complete all as specified and directed. |
| 21 | M&L for 20-25mm thick Machine cut Kota stone slab as in flooring, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15mm thick cement screed bed in cement mortar 1:4, complete all as specified and directed. |
| 22 | M&L for 20-25mm thick Machine cut Kota stone slab as in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and laid over and including 10mm thick cement plaster in cement mortar 1:4, complete all as specified and directed. |
| 23 | M&L for 20-25mm thick Machine cut Kota stone slab(Full length) with face bull nosed as in treads and riser of steps, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and laid over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed. |
| 24 | Repairs to existing sunken floors to be done complete all as specified and directed as given in following courses :- |
| 25 | Demolition and removing out sunken floor filling and depositing the same at a distance not exceeding 250m away from the outer edge of building, complete all as specified and directed. |
| 26 | M&L for applying two coats of epoxy resin coating polymer modified coating to a thickness of 1 mm including preparation thoroughly without any traces of dirt or luitance as in sunken floors complete all as specified and directed. (Using NITOBOND Chemical First coat 1:2:3 (Nitobond 1 Ltr : Water 2 Ltrs : Cement 3 Kg) NITOBOND Chemical second coat 1:3 (Nitobond 1 Ltr : Cement 3 Kg) |
| 27 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in two layers 1st layer 10 mm thick in cement mortar 1:4 and finished fair and even without using extra cement and 2nd layer 5 mm thick in cement mortar 1:4 mixed with liquid water proofing compound as per manufactures instructions for external / internal plastering and including taking down plastering complete all as specified and directed. Note: Liquid water proofing compound will be measured and paid separately. |
| 28 | M&L for PCC Type-D2, 1:4:8 (using 40 mm graded crushed granite stone aggregate) as in sunken floors complete all as specified and directed. |
| 29 | Supply only liquid water proofing compound complete all as specified and directed. |
| 30 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm complete all as specified and directed. |
| 31 | M&L for Non-skid ceramic coloured tiles 300mm x 300mm x 7mm thick, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 32 | M&L for 1st quality 7mm thick ceramic glazed wall tiles conforming to IS: 15622 of approved make, in all colours, shades except burgundy, bottle green, black of size 300mm x 450mm as in skirtings, risers of steps and dados, over and including 12 mm thick plaster in cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 33 | M&L for white vitreous china pedestal type water closet (European type W.C. Pan) with seat & lid and including10 litre low level white P.V.C. flushing cistern, flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid complete all as specified and directed. |
| 34 | M&L for White Vitreous China Flat back wash basin of size 550mmx400mm with 15 mm PTMT Pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required, complete all as specified and directed. |
| 35 | M&L for P.V.C. waste pipe for wash basin including P.V.C. waste fittings complete flexible pipe 32 mm dia complete all as specified and directed. |
| 36 | M&L for P.V.C. waste pipe for sink including P.V.C. waste fittings complete flexible pipe 40 mm dia complete all as specified and directed. |
| 37 | M&L for C.P. Brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms of 15mm nominal bore complete all as specified and directed. |
| 38 | M&L for C.P. Brass long body two way bib cock of approved quality conforming to IS standards and weighing not less than 690 gms of 15mm nominal bore complete all as specified and directed. |
| 39 | M&L for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making complete all as specified and directed. |
| 40 | M&L for C.P. Brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 of 15 mm nominal bore complete all as specified and directed. |
| 41 | M&L for C.P. Brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 of 15 mm nominal bore complete all as specified and directed. |
| 42 | M&L for PTMT grating of approved quality and colour of 100 mm nominal dia complete all as specified and directed. |
| 43 | M&L for unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 450mm length complete all as specified and directed. |
| 44 | M&L for C.P. Brass shower rose with 15 or 20 mm inlet of 150 mm diameter complete all as specified and directed. |
| 45 | S&F Cabinet mirror plastic body for Wash Hand Basin of size 350mmx450mm with 4mm thick looking mirror complete all as specified and directed. |
| 46 | S&F Dual foldable 304 grade, towel rack of 600 mm long with fixing arrangments complete all as specified and directed. |
| 47 | S&F 100mm bore sand cast iron soil waste and Vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed. |
| 48 | S&F 75 mm bore sand cast iron soil waste and Vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed. |
| 49 | S&F 50 mm bore sand cast iron soil waste and Vent pipe ISI marked in any length with or without ears with lead joints laid in floor/walls complete all as specified and directed. |
| 50 | S&F in replacement 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete Type B1, 1:2:4, complete all as specified and directed. |
| 51 | S&F in replacement 100 mm bore cast iron P trap with grating including jointing to waste pipe fixed in cement concrete Type B1, 1:2:4, complete all as specified and directed. |
| 52 | S&F in replacement 50 mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete Type B1, 1:2:4, complete all as specified and directed. |
| 53 | S&F 100mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 54 | S&F 75mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 55 | S&F 50mm dia cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 56 | S&F 75mm dia, cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 57 | S&F 100mm dia, cast iron branch pieces, Double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 58 | S&F 75mm dia, cast iron branch pieces, Double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 59 | S&F 50 mm dia, cast iron branch pieces, Double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 60 | S&F 100mm dia Cast iron Cowl complete all as specified and directed. |
| 61 | S&F 75 mm dia Cast iron Cowl complete all as specified and directed. |
| 62 | S&F Gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore complete all as specified and directed. |
| 63 | M&L for G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc of 25 mm dia complete all as specified and directed. |
| 64 | M&L for G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc of 20 mm dia complete all as specified and directed. |
| 65 | M&L for G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc of 15 mm dia complete all as specified and directed. |
| 66 | Supply & Fixed rotational moulded polyethylene water storage tanks of capacity 500 litres(cylindrical vertical with closed top, white coloured) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer, brass valve 20mm high pressure with polyethylene float and fly nut etc including dismantling existing water tank complete all as specified and directed. |
| 67 | M&L for 10mm thick Double charged Vitrified tiles of size 600mm x600mm as in floors with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid over and including 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 Kg/Sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. complete all as specified and directed. |
| 68 | Demolishing cement concrete by manually / mechanical means including disposal of material within 50 metres lead complete all as specified and directed. |
| 69 | M&L for 75mm thick Plain cement concrete (1:3:6) Type C2 (using 40mm graded granite crushed stone aggregate) as in plinth protection including necessary form work and finishing the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 70 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead, of area 3 Sqm and below complete all as specified and directed. |
| 71 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead, of area 3 Sqm and below complete all as specified and directed. |
| 72 | M&L for providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)Sal wood complete all as specified and directed. |
| 73 | M&L for Fixing 25x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of PCC 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete all as specified and directed. |
| 74 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and directed. |
| 75 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and S&F in the frame at site complete all as specified and directed. |
| 76 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or iveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Hold fasts similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 77 | S&F 35 mm thick Factory made Second class Hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 78 | S&F 2nd class hardwood 35mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into sauares with plain chamfered or rounded mitred and rebated sash bar complete all as specified and directed. |
| 79 | S&F 2nd class hardwood 30mm thick glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into sauares with plain chamfered or rounded mitred and rebated sash bar complete all as specified and directed. |
| 80 | M&L for Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed. |
| 81 | M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. |
| 82 | M&L for Preparaption of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint complete all as specified and directed. |
| 83 | M&L for Preparaption of old steel surfaces of any description not otherwise described, over 10 cm width or girth and providing two coats of synthetic enamel paint complete all as specified and directed. |
| 84 | M&L for preparation of previously untreated old painted steel and iron surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed. |
| 85 | M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 86 | M&L for preparation of new painted surfaces of walls and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 87 | M&L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high complete all as specified and directed. |
| 88 | S&F Aluminium Sliding Bolts of size 300mm complete all as specified and directed. |
| 89 | S&F in repairs 300mm, ordinary rat tail rod pattern springs fixed to Steel frame or Wooden frame including roller and roller plate complete all as specified and directed. |
| 90 | M&L for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 91 | S&F MS Butt hinge cold rolled medium weight 75 mm size complete all as specified and directed. |
| 92 | S&F MS Butt hinge cold rolled medium weight 100 mm size complete all as specified and directed. |
| 93 | S&F MS Butt hinges, cold rolled, medium weight 125mm size complete all as specified and directed. |
| 94 | S&F Anodised aluminium barrel tower bolt 125mm long complete all as specified and directed. |
| 95 | S&F Anodised aluminium barrel tower bolt 150 mm long complete all as specified and directed. |
| 96 | S&F Anodised aluminium barrel tower bolt 200mm long complete all as specified and directed. |
| 97 | S&F 'D' type Handle aluminium anodized 100 mm in size complete all as specified and directed. |
| 98 | S&F 'D' type Handle aluminium anodized 125 mm in size complete all as specified and directed. |
| 99 | S&F 'D' type Handle aluminium anodized 150mm in size complete all as specified and directed. |
| 100 | S&F Aluminum Hooks & Eye of size 150mm fixed to window shutter complete all as specified and directed. |
| 101 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 102 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 103 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in squares not exceeding 0.5 Sqm each pane fixed in aluminium windows/door/partions complete all as specified and directed |
| 104 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame and provided & fixed with new ones complete all as specified and directed |
| 105 | Supply and fixing 18 mm thick UV board duly edge banded with 0.8 mm thick PVC taping fitting of shutters shall be fixed with autoclosing hydraulic hinges and modular handles, design and colour as approved suitable for kitchen cabinet etc, including taking down existing board, complete all as specified and directed. |
| 106 | Taking down existing cabinets and supply & fixing Kitchen cabinet made of HDHMR board 18 mm thick water froof with life time waranty for anti-termite.cabinets shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed. |
| 107 | S&F in repairs for 18mm thick Veneered particle boards interior grade, solid core, general purposes type, with face veneers of type 'BB', fixed with screws to timber frame work with decorative veneer on one face complete all as specified and directed. |
| 108 | S&F in repairs in 6mm thick Veneered particle board for external teak wood lipping, fixed with nails complete all as specified and directed. |
| 109 | S&F in repairs 30mm flap continuous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed |
| 110 | S&F in repairs 2nd Class HW Plain filltes, sqaure or recatangular in section clean sawn, secured with nails or brnds of size exceeding 6 to 13 Sqcm complete all as specified and directed. |
| 111 | M&L for 2nd Class Hard wood Boarding of size 25mm thick, planed on both sides and fixed with nails including dismantling old boards complete all as specified and directed. |
| 112 | S&F Hasp and staple, aluminium anodised, 100mm size including bolts to hinges plate and fixed with screws complete all as specified and directed. |
| 113 | M&L for Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required of size 510mmx1040mm bowl depth 250mm complete all as specified and directed. |
| 114 | M&L for 18 mm thick Polished Granite stone slab flooring of approved shade in required design and patterns, in linear as well as curvilinear portions of the building, stair case etc all complete laid over and including 20mm thick screed bed in cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. complete all as specified and directed. |
| 115 | S&F in replacement stainless steel plate rack of size 900mm X 900mm X 250 mm complete all as specified and directed. |
| 116 | Supply and fix in repair 20mm dia anodised aluminium alloy curtain rod with fixing brackets, stops, rollers etc, complete all as specified and directed. |
| 117 | M&L for post construction antitermite-tretment at points of contact of wood work by chemical emulsion(water based solution)@ 0.5 Ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with chlorophyriphos or lindane emulsifiable concentrate conforming to IS 8944 or IS 632 respectively complete all as specified and directed. |
| 118 | M&L for treatment of soil under existing floor using emulsion at 1 Ltr per hole 300mm centre to centre including drilling and plugging 12mm dia holes with CM (1:2) to match existing floor complete all as specified and directed. |
| 119 | M&L for treatment Along external wall below concrete or masonry /apron using chemical at 2.25 Ltr per running metre including drilling and punching holes etc., in apron complete all as specified and directed. |
| 120 | Removing of vegetation / plantation on the wall / roof / any position of upto double storey building including necessary scaffolding upto 6 m height and roots superfacial area not exceeding 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines complete all as specified and directed.Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately. |
| 121 | Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps, ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed. |
| 122 | Taking down old DBs with MCCB , MCBs of any size and capacity & making good to the disturbed surface to match with the existing complete all as specified and directed. |
| 123 | Taking down old sub main wiring/cable of any size and capacity including making good to the disturbed surface to match with the existing complete all as specified and directed. |
| 124 | Taking down old unserviceable exsiting ceiling/wall mounted/exhaust fan of any size and making good to the disturbed surface to match with the existing & deposite in MES store yard complete all as specified and directed. |
| 125 | M&L for Group-C wiring for Light point / Fan point / Exhaust Fan point/ Call Bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc, complete all as specified and directed. |
| 126 | M&L for Wiring for twin control light point with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable etc, complete all as specified and directed. |
| 127 | Supply and fixing 3 Pin 5/6 Amps modular socket outlet complete all as specified and directed. |
| 128 | Supply and fixing 3 Pin 15/16 Amps modular socket outlet complete all as specified and directed. |
| 129 | Supply and fixing 3 Pin, 5 Amps ceiling rose on the existing junction box/ wooden block including connections etc.complete all as specified and directed. |
| 130 | Supply and fixing Modular switch one way 6 Amps on the existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and directed. |
| 131 | Supply and fixing Modular switch one way 16 Amps on the existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and directed. |
| 132 | Supply and fixing Modular switch two way 6 Amps on the existing modular plate & switch box including connections but excluding modular plate etc. complete all as specified and directed. |
| 133 | Supply and fixing Two module stepped type electronic fan regulator the existing modular plate switch box including connections but excluding modular plate etc. complete all as specified and directed. |
| 134 | Supply & fixing of call bell/buzzer complete all as specified and directed. |
| 135 | M&L for Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required for light point , 5 Amps socket, 16 Amps power socket & sub main wiring complete all as specified and directed. |
| 136 | 2 X 1.5 Sqmm + 1 X 1.5 Sqmm earth wire(5 Amps Power Socket for 96 points) |
| 137 | 2 X 2.5 Sqmm + 1 X 2.5 Sqmm earth wire (15A Power Circuit for 96 Points) |
| 138 | 2 X 4 Sqmm + 1 X 4 Sqmm earth wire (AC 24 points) |
| 139 | 2 X 6 Sqmm + 1 X 6 Sqmm earth wire (Submain) |
| 140 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 141 | Supply and fixing LED BUKLHEAD Luminaire with Opal diffuser, equipped with 2KV in-put surge protection with IP65 protection rating, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 142 | Supply and fixing (4FT) 20 W LED fitting baten fro surface and wall conduit mounting High Transmissitivity diffuser High lumen Output PF > 0.98, thd < 10 % wall mounted type fitting with LED tube rod, complete all as specified and directed. |
| 143 | Supply and fixing LED base street lumainare 35 W with pressure die cast aluminium housing with Poly carbonate coverand high power LEDs and secondary lenses with IP 66 Protection including 40 x 6mm flat iron clamps, nut, bolts, washer with 32 mm dia GI pipe light grade bracket bend to shape not less than 1.2 m long complete all as spcified and directed. |
| 144 | Supply and fixing of surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board 8 way (4 + 24), Double door of sheet steel, dust protected, duly powder painted, inclusive of 200 Amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) complete all as specified and directed.Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required. |
| 145 | Supply and fix MCB TPN 63 Amps 4 Pole, with breaking capacity 10 KA along with replacement of old unservceable one complete all as specified and directed. |
| 146 | Supply and fixing MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar complete all as specified and directed. |
| 147 | Supply and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 Amps \\"C\\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. complete all as specified and directed. |
| 148 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.(i) SP 6 To 32 Amps complete all as specified and directed. |
| 149 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.(i) SPN 5 to 32 Amps complete all as specified and directed. |
| 150 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but with charcoal/ coke and salt ) complete all as specified and directed. |
| 151 | M&L for 6 SWG dia GI wire on surface or in recess for loop earthing complete all as specified and directed. |
| 152 | M&L for Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 95 Sqmm 3.5 core size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender