Tender For Special Repairs To Bldg No P-709 (Cook House) Of 14 Dou Under Ge Clement Town, Dehradun.
Tender Value
27.18 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
19 days left
EMD
54500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No P-709 (Cook House) Of 14 Dou Under Ge Clement Town, Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 2 | M&L 75mm thick PCC (1:3:6) type C-2 (Using 40mm graded stone aggregate) as in plinth protection /hardstanding , laid in panels, finished the top surfaces even and fair without using extra cement complete all as specified and directed |
| 3 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 4 | M&L RCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in beams and roof including balconies, canopies, deck slabs or in Chajja/facia projection and the like complete all as specified and directed |
| 5 | M&L mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 6 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces (Horizontal or sloping) complete all as specified and directed |
| 7 | Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, jambs etc complete all as specified and directed |
| 8 | M&L brick work with sub class \\"B\\" old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed |
| 9 | M&L for half brick work with subclass ‘B’ bricks, straight or curved on plan to any radius built in CM 1:4 complete all as specified and directed |
| 10 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size n.exc 1.50 Sqm complete all as specified and directed |
| 11 | Taking down chowkhats or frames with shutters (without taking off shutter from the frame) of size exc 1.5 Sqm and n.exc 4 Sqm complete all as specified and directed |
| 12 | S&F in repairs Anodised aluminium powder coated frame for doors window,partition and ventilatore with one or more rebates including joining cleat forfixing etc. complete all as specified |
| 13 | S&F in repairs Anodised aluminium powder coated door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified |
| 14 | S&F in repairs Anodised aluminium powder coated window and ventilators shutters sliding or fix type, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,including provision of lock in each door, rollers, anodised aluminum snap beading screws etc. complete all as specified |
| 15 | S & F sheet glass 5.5 mm thick ordinary quality frosted on one side in n. exc 1.5 Sqm in each pan with rubber beading as in doors and partion. |
| 16 | S&F Prelaminated particle board 12 mm thick, exterior grade,prelaminated both side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work as in aluminium door and partion. |
| 17 | S & F sheet glass thick ordinary quality in n exc 0.75 Sqm in each pan 4 mm thick with rubber beading as in window. |
| 18 | S&F in repair PTMT bath mirror cabinet of overall size 500mmX400mm, fixed in position complete all as specified and directed. |
| 19 | M&L for Factory made solid WPC Door frame (125mm X 63mm Double Rebate) made from 100% LEAD FREE (Single extruded process) material with density 780kg / Cum and manufactured by an ISO : 9001-2015 certified company, all as per specification drawings as directed by the Engr-in-Charge. The door frame should be water proof, Termite proof, Fire retardant and having excellent, fixed with fasters with sufficient holding capacity complete all as specified and directed |
| 20 | M&L for Solid factory made 100% solid WPC brown door frame (100mm X 63mm single rebate) made from 100% LEAD FREE (Single extruded process) material with density 780 kg / Cum & manufactured by an ISO: 9001-2015 certified company, all as per specification drawings as directed by the Engr-in-Charge The door frame should be water proof, termite proof, fire retardant and having excellent, fixed with fasters with sufficient holding capacity complete all as specified and directed . |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 22 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specifed and directed |
| 23 | S&F 200mm Stainless steel,barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 24 | S&F 250mm Stainless steel, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 25 | S&F 150mm Stainless steel handles, cast type, anodised complete all as specified and directed |
| 26 | S&F 150mm Stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 27 | S&F 150mm size floor door stopper of Stainless steel and tongue with hard drawn steel spring spring, fixed in floor complete all as specified and directed |
| 28 | Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified |
| 29 | S&F 18 mm thick with min density 600 Kg/Cum LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet and cupboard shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed |
| 30 | S&F Auto closing hinges 35mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified |
| 31 | S&F Ball bearing runners 400 mm Telescopic (KA 5632) full extension load capacity 45 kgs complete all as specified and directed . |
| 32 | S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. |
| 33 | S&F Ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified. |
| 34 | S&F Stainless Steel 304 grade wire Basket of pull out type like lain/cup &saucer /bottle/ multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position complete all as specified and directed. |
| 35 | S&F in repair for stainless steel, 25 mm dia and 1.2 mm thick curtain rod with and including fixing SS brackets and decorative type brass knobs both side of each rod, complete all as specified and directedNote Measurement will be taken between end points of Knobs |
| 36 | Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.. |
| 37 | S&F Rolled mild steel work of Fe-290 (Gde E-165) as in framed work, trussed, purlins, crane gantries, railS&Fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc |
| 38 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 39 | M&L for Non skid coloured ceramic tiles of any design and pattern, 8 to 9 mm thick (square / rectangular) area of each tile exe 0.18 sqm but not exe 0.38, in floor etc incl 15mm thick screed bed in CM 1:6, Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles complete all as specified and directed |
| 40 | M&L for Non skid Endura coloured tiles 8-10mm thick (square/rectangular) grade-4, area of each tile exc 0.06 Sqm but not exc 0.16 Sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge. |
| 41 | M & L for coloured glazed ceramic tiles of any design and pattern, 600x 300x 7mm/ 600X 450X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10 mm thick rendering in CM 1:4, complete all as specified and directed. |
| 42 | M&L Light shade vitrified tiles Double charge 8-9mm thick (Square/Rectangular) polished grade-4, area of each tiles exc 0.72 sqm but n.exc 2.16 sqm fix with spacer 3mm wide filled with epoxy grout, over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed directed by Engr-in-Charge |
| 43 | M&L Light shade vitrified tiles Double charge 8-9 mm thick (Square/Rectangular) polished grade-4, area of Each tiles exc 0.38sqm but n.exc 0.72sqm as in skirting/dado, over and including 10mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed directed by Engr-in-Charge |
| 44 | M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor complete all as specified and directed |
| 45 | Taking down cement plaster of any description on brick work or stone masonry walls including rackingout joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 46 | M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed |
| 47 | M & L plastering in two layers consisting of 10mm thick in CM 1:6 and top layer of 5mm thick in CM 1:4 mixed with liquid water proofing compound on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed. (WPC shall be measured and paid seperately) |
| 48 | M&L for two coats of oil bound distemper over a coat of primer & putty to newly plastered surface including preparation of surfaces complete all as specified and directed |
| 49 | M&L Complete removal of existing treatment to wall (internal) surfaces in any height for two coatss of oil bound distemper on walls over a coat of primer to old plastered surface complete all as specified and directed. |
| 50 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new/old surfaces complete all as specified and directed. |
| 51 | M&L 5mm thick rendering in ceiling of cement mortar (1:3) on fair faces of brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and directed |
| 52 | M&L for three coats of white wash to newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed |
| 53 | M&L for preparing new steel and iron surfaces of any description over 10 cm Width /Girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as directed |
| 54 | M&L for preparing new wooden or wood based surfaces of any description over 10 cm Width /Girth and applying two coats of synthetic enamel paint of any tint over one coat of pink primer complete all as directed |
| 55 | M&L PCC 1:5:10 type E-2, using 40 mm graded concrete, as in foundation, mass concreting, sunken floor etc complete all as specified and directed |
| 56 | M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate, as in gable wall, sunken, coping portion rounded chamfered on edge complete all as specified and directed |
| 57 | Taking up or down 15mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 58 | S&F 15 mm bore dia of medium grade galvanised steel tubing with all fittings including tank nipple and fixed complete to wall or laid in floor including cutting through walls, floors, etc and their making good with existing surface complete in all respect as specified |
| 59 | Cutting chases, pinning in, making good to facing where required and pointing in Cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water pipe etc and making good, cutting not exc 10cm width or girth complete all as specified and directed |
| 60 | Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal from site complete all as specified and directed |
| 61 | S&F 20mm dia bore GI tubing medium grade fixed to wall or ceiling or laid in floors etc complete all as specified and directed |
| 62 | S & F in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes (6 Kg / Sqcm pressure rating) (single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 63 | S & F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes , single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 64 | S&F in repair 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement including fixing waste pipe etc complete all as specified and directed |
| 65 | S&F in repair PVC (SWR) bend any radius 110mm bore complete all as specified and directed |
| 66 | S&F in repair PVC (SWR) bend any radius 75mm bore complete all as specified and directed |
| 67 | S&F in repair PVC (SWR) 'P' Traps 110mm bore complete all as specified and directed |
| 68 | S&F in repair PVC vent cowls 110mm complete all as specified and directed |
| 69 | S&F in repair PVC connection 15mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified |
| 70 | S&F in repair PVC waste pipe 32/40 mm dia complete all as specified and directed |
| 71 | S&F in repair 20 mm dia brass CP tubular towel rail D type 600mm long complete all as specified and directed. |
| 72 | S&F in repair 15mm dia brass chromium plated Bib tap fancy type with wall flange complete all as specified. |
| 73 | S&F in repair 15mm Stop valve/angle cock fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified |
| 74 | S&F in repair 5mm thick looking mirror bevelled edge of selected quality glasssize (1200x600mm) fixed with stainless steel glass fastner complete all as specified |
| 75 | S&F Soap Dispenser ABS Body 0.8 ltr capacity complete all as specified and directed. |
| 76 | S&F Bolt touch-free infrared hand drayer with 1150W rated power& carbon brush motor with 304 stainless steel finish complete all as specified and directed. |
| 77 | S&F Wash basins, Vitreous China (oval type) 500x380mm X120MM,counter top including of fixing of supply and waste pipe complete all as specified and directed. |
| 78 | S&F in repair of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x160mm complete all as specified |
| 79 | S&F vitreous china wash down water closed pan with connected flushing cistren white, including connection to drain (or out going pipe) and to flush pipe, antisypthonic and flush pipe) complete all as specified and directed. |
| 80 | S&F in repair 15mm dia brass CP sink mixer with swinging spout (wall mounted model) with connecting legs and wall flanges screwed down for iron pipe and fixed complete all as specified and directed . |
| 81 | S&F in repair 15mm dia chromium plated central hole wash hand basin mixer without PWS with 450mm BRAIDED HOUSE hose screwed down high pressure screwed for iron pipe completed all as specified and directed. |
| 82 | S&F in repair CP health faucet with 1m flexible tube and wall hook complete all as specified and directed. |
| 83 | S&F in repair CP overhead shower 200MMX200mm Square shape single flow (ABS body chromium plated with gray face plate) with rubit cleaning system fixed in 15mm bore of pipe complete all as specified and directed. |
| 84 | S&F in repair CP hand shower 140 Round Shape mm Square shape single flow (ABS body chromium plated with gray face plate) with rubit cleaning system fixed in 15mm bore of pipe complete all as specified and directed. |
| 85 | S&F in repair CP Towel Rack 600mm long lower Hanger ,Stainless steel complete all as specified and directed. |
| 86 | S&F in repair CP toilet paper holder fixed to wall with CP brass screws complete all as specified and directed. |
| 87 | S&F in repair sheet glass assembly fancy type 600mm long and fixed with brass screw complete all as specified and directed. |
| 88 | S&F in repairs PVC water storage tank triple layer white colour cylindrical, vertical with closed top with threaded cover hoisted and fixed in position tank capacity 1000 Ltr with and including ball valve high pressure of PTMT with epoxy coated Aluminum rod and high density plastic ball screwed for 20mm bore of iron pipe and making connection for inlet and outlet including dismantle of old water tank and removing from site complete all as specified and directed |
| 89 | S&F in repair 20mm dia gun metal gate valve with iron wheel haeded screwed both ends to iron pipe and fixed complete all as specified and directed |
| 90 | M&L for post construction Antitermite treatment Along the wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed |
| 91 | S & F Stainless steel kitchen plate rack 1.0 mm thick sheet of over all size 750 x 900 x 250 mm fixed with steel screws and steel rawal plugs complete all as specified and directed. |
| 92 | M & L butt hinges of mild steel medium weight cold rolled 100mm long and fixed with screws to timber frame work complete all as specified and directed |
| 93 | M & L 16 to 18 mm thick pre polished granite stone slab of approved quality on floor ,cooking platform over and incl 20mm thick cement mortar in 1:6, bedded and jointed with cement mortar and pointed in white cement mortar 1:2 complete all as specified and directed. |
| 94 | S & F in repair corner self 300mm radius of 5mm thick toughened glass with CP railing with bracket S & Fixed with brass screw complete all as specified and directed . |
| 95 | S & F in repair Towel ring Stainless steel fixed with brass screw complete all as specified and directed . |
| 96 | Dismantling asbestos cement (corrugated, semicorrugated etc) sheets in roof coverings including ridges etc complete all as specified and directed |
| 97 | S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 98 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified |
| 99 | S&F Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-410W (gde E-250) quality A complete all as specified and directed. |
| 100 | Dismantling boarding, any description, fixed in any position with screw |
| 101 | M&L Solid PVC lining/panelling consist of 5-10mm thick wood grain printed with corrugation patteren PVC sheet inclusive of solvent and fixing at site on PVC frame complete all as specified and directed. |
| 102 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh, with and including provision of necessary frame work as in false ceiling,two coat of distemper over a coat of alkali based primer and a coat of putty making even and smooth surface complete all as specified and directed. |
| 103 | Taking down existing tar felt and Pcc,plastering from the roof surface washing down and cleaning the surface with water and rubbish off the premises and M&L 25mm thick Pcc 12.5 mm graded aggregate B 0 for finshing existing surface even & smooth and laying water proofing treatment to the Roof with single component, cold applied, water based Polyurethane modified acrylic dispersion with highly elastic and UV resistant water proofing treatment to the Roof @ 1.2kg/per sqm to confirms to ASTM D 6083- 97a with a density of 1.25 to 1.3kg/per ltr, having tensile strength of 1.5N/mm2, having elongation of 350°/o with solid content not less than 60% in 2 coats including self-priming bond coat of Advanced Latex plus mixed Water and Cement in 1:4:7 and sandwiching 40gsm Geo-textile between two coats. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification and direction of the Engineer ln charge. |
| 104 | S & F in repairs 12mm thick wave free toughened clear glass as in doors and partitions with stainless steel spider fitting, fish mouth channel in bottom and top as required with and including provision of all other neccessary fixture,sun control film,auto closing floor spring and accesaries, complete all as specified and directed. |
| 105 | M&L POWERFUL AIR CURTAIN with 1100 CFM, creating a tranquil indoor and outdoor condition. It efficiently eliminates dust and providing fresh and clean air during both hot summers and cold winters.Material: ABS , Types : With Remote Control / Sensors, Width Size : 4 Feet.( No. Of Shafts: 2 Double) LOW-NOISE OPERATION : Diameter of wheel: 120mm , Noise (db): <52,, No.of Blowers : 4, No.of Motors: 2,Blowers Material : ABS ,Operates quietly to ensure a disturbance-free dining experience. Indoors feel like home, with noise levels equivalent to that of a residential setting, allowing you to enjoy a clean and peaceful space. TWO-SPEED SETTINGS : Easily switch between two fan speeds to adapt to all seasons. Low speed for energy efficiency and minimal noise,Voltage/Frequency (Hz): 220V/50HZ , Input Power : 560 W. Air curtain come with single door Magnetic sensor |
| 106 | S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 107 | Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed. |
| 108 | Taking down submain/ service / UG cable on wall/ trenches/ roof/ floor etccomplete all as specified and directed. |
| 109 | Dismantling and taking down carefully existing DB’s & DB Enclosurs of any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified |
| 110 | M&L Point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases , making surface good etc along with contineous earth wire 1.5 Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories for the following:-(a) One light/fan/bell/exhaust fan point controlled by one, 01-way modular type switch 5/6 Amp. |
| 111 | All as per Item No 110 above but on the same board with other switches/sockets |
| 112 | All as per Item No 110 above but for One 5 pin 5/6 Amps socket outlet point on independent board controlled by one, 01-way modular type switch single pole 5/6 Amps. |
| 113 | M&L Point wiring with 2.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases and making surface good etc along with contineous earth wire 2.5Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories. (a) one three pin 15 Amps Switch Socket outlet on independent board |
| 114 | Supply and fixing modular switch type 1 way 06 Amp, 1 Module, 240 Volts AC , |
| 115 | Supply and fixing modular switch type 1 way 16 Amp, 1 Module, 240 Volts AC. |
| 116 | Supply and fixing modular socket 06 Amp 3 pin combined, 2 module all as specified. |
| 117 | Supply and fixing modular socket 06/16 Amp combined, 2 module all as specified. |
| 118 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed |
| 119 | Supply and fixing batton holder ISI Marked mounted on wall including 09 Watt LED Bulb all as specified and directed. |
| 120 | Taking down and Refixing of old ceiling fan /Exhaust Fan from exisit building all as per specified and directed by EIC. |
| 121 | Supply and fixing ceiling fans complete with blades, down rods and electronic regulator accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00, BEE Five star rated with brushless direct current motor (BLDC) including provision of cable flexible 3 core of suitable size wire from ceiling rose to Ceiling Fan complete all as specified and directed. |
| 122 | S&F LED tube light batten 20 watts 4 fts polycarbonate housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range 2KV, voltage protection range 120-280 VAC , ,system efficacy not less than 110 Lm/watt for the fitting , power factor>0.95 total harmonic distortation<20% , colour rendering index >80, coefficient colour temp 6500 K, fixed on site with all accessories all as specified and directed. |
| 123 | M & L for LED Bldg Security light Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 124 | Supply, fabricated and and fixing of street light bracket made out of GI pipe 1.0 Mtr long, 32 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for steel tubular poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer all as specified and as directed. |
| 125 | S& F double door sheet metal enclosure for DB , 8way , SPN, with 200 Amps rated bus bar , 240 Volts suitable for housing MCBs and flushed inside the wall and making good for disturbed surface with existing etc complete all as specified & directed. |
| 126 | S & F vertical load line in sheet metal enclosures MCCB TPN DB's with double door for incorporating MCCB as incomer and MCBs SP/SPN as outgooing , IP-43 , TPN 4 way with 200 amps rated busbar, 440 volts, as per IS-8623 including taking out old UNSV DB and making good the disturbed surface of wall and match with the existing surface compelte all as specified and as directed. ( Note- MCCB & MCBs as main incomer/out going shall be paid separately in the relevrent items) |
| 127 | Supply and fixing MCB SP AC 240 volts of 6 to 32 Amps capacity 10 KA, 'B' series and making connections with suitable size of copper lugs complete all as specified and directed . |
| 128 | Supply and fixing MCB SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified. |
| 129 | Supply and fixing MCCB ,63 Amp,415 V,16 KA , 4 Pole , fixed type repturing all as specified. |
| 130 | Taking down old water heater storage type from existing building and Refixing the same all as specified and directed. |
| 131 | S&F Exhaust fan AC single phase 230/240 Volt of size 300 mm sweep, metallic body powder coated painted finish, Power consumption- 50 W, Air deplacement -1290 Cum/Hr, RPM-900 complete with louvers including making whole and grouting of nut bolts etc and making good the disturbed sufaces of wall complete including taking down old exhuast fan any type from existing building and deposit to MES Store all as specified and directed. |
| 132 | Supply & fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep complete with all fittings all as specified. |
| 133 | M & L for sub main wiring with two line single core of 6 Sqmm (nominal cross sectional area ) and single core for earth wire with color code (RYB) Sunsheathed PVC insulated cables FRLS-H cable 1100 Volts grade multi stranded copper conductor drawn through & including non metallic rigid PVC conduit of size 19/20 mm or higher dia with & including necessary conduit accessories concealed/surface only on roof & colomn) type including 4 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly complete all as specified & directed. Note : Two runs of pahse and neutral wire and one run earth wire with PVC conduit measured as one length or one RM . |
| 134 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by GI wire 4 mm as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all excavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 135 | Supply and laying or fixing or passing through pipe, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade , cross - sectional area of 25 sqmm 3.5 core complete all as specified & as directed. |
| 136 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out cables, pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge. |
| 137 | M & L for fine dry sand cushioning for underground cable by providing layers of sand 8 cm before laying and 15 cm deep after laying the cable including streching the cable ( measurement to be taken after punning down consolidated thick ness ) complete all as specified and as directed . |
| 138 | Supply and laying , un-reinforced precast concrete cable cover, class LV, Type 1, flat, size 250mmX 150mmX40mm with breaking load capacity 200 KG complete all as specified & as directed. |
| 139 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge. |
| 140 | Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engr - in - Charge. |
| 141 | M & L for 40 mm bore GI pipe (medium grade) laid under road or fixed with pole/wall of culvert as in protection of UG cable incl necessary MS clamp and complete all as specified and directed. |
| 142 | NOTES :-1. For the items for which specifications not mentioned any where in the tender, the BIS specifications shall be followed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender