Tender For Repair To Fencing /Compound Wall And Building For Mes Pump House & Repair To Sewage Line At Shillong Cantt Under Ge Shillong
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
4 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Fencing /Compound Wall And Building For Mes Pump House & Repair To Sewage Line At Shillong Cantt Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) area n. exc 1.50 Sqm each with shutters complete all as specified and directed. |
| 3 | Demolition of Brickwork / solid concrete block work built in Cement mortar complete all as specified and directed. |
| 4 | Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital, similar pattern as in roof coverings. complete all as specified and directed. |
| 7 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 8 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed. |
| 9 | Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed. |
| 10 | Dismantling boarding of any description fixed in any position with nails complete all as specified and directed |
| 11 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed. |
| 12 | Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, weight n. exc. 4Kg per sqm complete all as specified and directed. |
| 13 | Dismantling post or struts (Wood, steel, RCC) any section including taking out embedded portion by demolition of cement concrete in foundation and making good the disturbed portion of ground complete all as specified and directed. |
| 14 | Dismantling barbed wire fencing of any description, size and spacing complete all as specified and directed. |
| 15 | Dismantling fencing wire mesh any type, complete all as specified and directed. |
| 16 | Dismaltling of wrought iron or MS work of any description complete all as specified and directed. |
| 17 | M&L for MS screws bolts (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, length of bolt n exc. 30 cm, diameter of neck n.exc. complete all as specified and directed. |
| 18 | S&F MS Round bars/TMT steel bars 10mm dia and over in stiffner to chain link fencing, cut to length, bent to shape required including cranking and binding with MS wire (annealed not less than 0.9mm dia) conforming to Fe-290 (Gde E165) all as specified and directed. |
| 19 | Supply only chain link MS galvanised fencing, any size or type, as approved by GE complete all as specified and directed. |
| 20 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 21 | S&F for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain-ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed. |
| 22 | M&L for mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 23 | S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging; also fastening and fixing and confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed. |
| 24 | S&F welded steel wire fabric complete to wood or steel members in RCC UG sump etc. and weight n. exc. 4kg per sqm complete all as specified and directed. |
| 25 | M&L for RCC nominal mix 1:2:4 Mix, type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in kitchen shelves , man holes cover etc. and the like including all necessary formwork complete all as specified and directed. |
| 26 | M&L for Pre cast RCC 1:2:4 Mix, type B1 (using 20 mm graded crushed stone aggregates) as in cover slab for soakage well / manhole and similar works supported on walls set in cement mortar 1:6 complete all as specified and directed.Note:- Reinforcement steel shall be measured & paid separately. |
| 27 | M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed.Note :- Weight of binding wire shall not be considered for measurement and payment purpose. |
| 28 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 29 | M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed. |
| 30 | S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as specified and directed. |
| 31 | M&L for 2nd class hard wood in scantling clean sawn timber and fixed complete all as specified and directed. |
| 32 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and directed. |
| 33 | S&F 30 mm thick Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete all as specified and directed. |
| 34 | M &L glazed skeleton hardwood shutters open rebated and prepared to receive glass gauge etc (Without sash bars) , edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass etc 35mm thick of 2nd class hard wood complete all as specified and as directed. |
| 35 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 36 | S&F butt hinges 75 mm medium weight, stainless steel, and fixed complete all as specified and directed. |
| 37 | S&F Butt hinges 125mm, medium weight, stainless steel, and fixed complete all as specified and directed. |
| 38 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and directed. |
| 39 | S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and directed. |
| 40 | S&F in repair Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 41 | S&F steel work as in tubular , rafters, purlins, posts and similar work (round/square/rectangular shape of pipes as approved by Engr-in-charge ) trusses including posts, special shaped washers, gusset plates etc complete using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and directed. |
| 42 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe complete all as specified and directed. |
| 43 | M&L for preparation of plastered or unplastered old decorated surfaces of walls by washing rubbing down and stopping of any external painted surfaces and priming with alkali resistant primer paint and applying two coats of weather coat exterior paint with roller incl filling of holes and cracks with suitable material like cement or plaster of paris etc complete all as specified and directed. |
| 44 | M&L for preparation of new plastered/concrete surfaces of walls/ceiling and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller incl filling of holes and cracks with suitable material like cement or plaster of paris etc complete all as specified and directed. |
| 45 | Complete removal existing treatment and applying 1mm thick of wall care putty on walls/ceiling to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and directed. |
| 46 | M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of wall care putty on walls/ceiling to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and directed. |
| 47 | M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 48 | M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 49 | M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 50 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 51 | Hacking out old broken glass (any thickness, size, quality or description) from metal framed or wooden including punching or drilling out old glazing pins/ spring clips complete all as specified and as directed. |
| 52 | S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beadings in squares n.exc 0.50 Sqm in each pane complete all as specified and directed. |
| 53 | S&F 4 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and directed. |
| 54 | M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 using cement concrete 1:3:6 Mix, type C1 (Using 20mm graded crushed stone aggregate) complete all as specified and directed. |
| 55 | M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4, using cement concrete 1:3:6 Mix. type C1 ( Using 20mm graded crushed stone aggregate) complete all as specified and directed. |
| 56 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering / cladding including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, complete all as specified and directed. |
| 57 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 58 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and directed. |
| 59 | M&L for 25 mm thick Cement concrete 1:2:4 Mix, type B-1, (Using 20mm graded crushed stone aggregate) used over sub base to received floor tiles complete all as specified and directed |
| 60 | M&L 40 mm thick PCC 1:2:4 Mix, type B-1, Using 20 mm graded crushed stone aggregates, laid in alternate bays as in floor surface finished even and smooth without using extra cement including roughening to existing concrete surface and using cement slurry @ 3 Kg/Sq mtr before laying concrete in floor complete all as specified and directed |
| 61 | M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over and including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6) complete all as specified and directed. |
| 62 | M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over and including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed. |
| 63 | Add to above item No 62 on vertical surfaces such as skirting , dados and riser to steps and laid over and including10 mm thick cement backing coat in CM 1:4 complete all as specified and directed. |
| 64 | M&L for Machine cut kota stone slab flooring 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20 mm thick cement screed bed in CM 1:3 complete all as specified and directed. |
| 65 | Taking down cement plaster of any description on brick or stone walls etc. including raking out joint, hacking for key, scrubbing down with water etc in patches of any size complete all as specified and directed. |
| 66 | M&L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins , fascias, chajjas, parapets etc. and finishing the surfaces even and fair without using extra cement complete all as specified and directed. |
| 67 | M&L for 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing the surfaces even and fair without using extra cement complete all as specified and directed. |
| 68 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 69 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercia plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 70 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifications complete all as specified and directed. |
| 71 | S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 72 | S&F in repairs Bib taps, cast copper alloy fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 73 | S&F in repairs stainless steel gratings 100mm bore size fixed with cement mortar complete all as specified and directed. |
| 74 | S&F in repairs 15 mm bore brass CP basin mixer for mixing hot & cold water screwed down high pressure for iron pipe and fixed complete all as specified and directed |
| 75 | S&F in repair of 15mm dia pillar taps fancy type, of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-120gms) for iron pipe fixed complete all as specified and directed. |
| 76 | S&F vitreous china wash down water closet pan (Pedestal Pattern) with P or S Trap white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and directed |
| 77 | S&F plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 78 | S&F in repairs PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 79 | S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and directed. |
| 80 | S&F for white vitreous china urinal flat back large of size 420x395x635mm (Make: CERA model No. 5001) including fitting of urinal spreader CERA model No. CG 501 or equivalent in jaquar /Parryware/Prayad/Hindware with self closing angle cock pressmatic for urinal with wall flange and 200mm connecting pipe complete all as specified and directed. |
| 81 | M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 82 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete complete all as specified and directed. |
| 83 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 84 | S&F PVC (SWR) bends 110mm dia complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends 75mm dia complete all as specified and directed |
| 86 | S&F in repair PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and directed. |
| 87 | Dismantling water tanks exc 250 ltrs but not exc 500 ltrs capacity and incl supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl 20mm dia float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed complete all as specified and directed. |
| 88 | Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity and incl supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynut complete , screwed for iron pipe or brass ferrule and fixed for iron pipe and fixed complete all as specified and directed. |
| 89 | S&F in repair brass chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 90 | Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and directed. |
| 91 | Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and directed. |
| 92 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 93 | Supply and Laying Steel Water Tubing 20 mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 94 | S&F in repair stop valve / angle valve cast copper alloy screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed |
| 95 | M&L for 75 mm thick cement concrete 1:2:4 Mix, type B-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed. |
| 96 | M&L for PCC coping using cement concrete 1:2:4 Mix, type B-1 (using 20mm graded crushed stone aggregate) including necessary form work complete all as specified and directed. |
| 97 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and directed. |
| 98 | M&L for cement concrete type B-1, 1:2:4 Mix, (using 20 mm graded crushed stone aggregate) as in saucer drain or surface channels etc. complete all as specified and directed. |
| 99 | Excavation in post holes each n.exc. 0.5 cum in soft/loose soil getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good surface complete all as specified and directed. |
| 100 | M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base,foundation filling and mass concrete etc.complete all as specified and directed. |
| 101 | M & L 75mm thick PCC 1:4:8 Mix, type D2 (Using 40 mm graded crushed stone aggregate) as in sub floors finished even and rough without using extra cement complete all as specified and directed. |
| 102 | M & L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 103 | M & L Machine pressed precast concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 Grade complete all as specified and directed. |
| 104 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:4 including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 105 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed. |
| 106 | S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and directed. |
| 107 | S&F steel windows or ventilators, fixed type with glazing bars including lugs and necessary flat iron to secure wire gauze,glass complete all as specified and directed. |
| 108 | M&L for repairs to rolling shutter including necessary gressing, welding, locking arrangement including serviceing to gear box etc (any size) complete as to bring in service condtions etc complete all as specified and directed |
| 109 | Disconnecting to existing PVC tanks , setting aside ( for lowering down if required ) for repairs , if hoisting if required reconnecting and refixing in position cap exc 250 but n.exc 500 ltr including cleaning of overhead tank including removing the sludge washing down with detergent powder & writing the date of cleaning with paint complete all as specified and directed |
| 110 | Disconnecting to existing PVC tanks , setting aside ( for lowering down if required ) for repairs , if hoisting if required reconnecting and refixing in position cap exc 500 but n.exc 1000 ltr including cleaning of overhead tank including removing the sludge washing down with detergent powder & writing the date of cleaning with paint complete all as specified and directed |
| 111 | Taking out and removing sludge water/waste materials/foreign materials from septic tank of any size and burring the entire sludge under ground in the pit of suitable size and covering the pit with earth or earth mixed rubbish and removing surplus soil to a distance n.exc 50 m including necessary earth work in pit complete all as specified and directed. |
| 112 | Cleaning of blocked water closet by flushing with water and cleaning of soil pipe upto first manhole, cleaning WC Pan/Floor trap/Nahani Trap of bathroom, kitchen/urinalss and flushing cistern with water complete all as specified and directed. |
| 113 | Cleaning of manholes with spades or bucket taking out sludge from manhole and disposed off aside by putting earth on it. Again use water with bucket and put in manhole to clear the sludge and ensure the sludge is drain out completely. The depth of manhole n.exc 1 mtr each complete all as specified and directed. |
| 114 | All as per item No 113 here-in-before but depth of manhole exc 1mtr but n.exc 2mtr complete all as specified and directed. |
| 115 | Cleaning and desludging of existing sewage line of 150 mm to 200 bore and depth up to 3.00 Mtr from man holes /GT to man holes incl gully traps complete deslufging by means of machanical by or manual rodding by blocking the 1st man hole and taking all sludge to the next manhole and taking out sludge finally cleaning the line from clean water complete all as specified and directed. |
| 116 | Demolition and breaking of dain pipes (SGSW , AC or reiforced concrete ) set in cement mortar for 150mm internal dia of pipe complete all as specified and directed. |
| 117 | M&L for concrete bed to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 etc complete all as specified and directed. |
| 118 | M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in benching of man holes including forming centre channels half round or 1/4 section complete all as specified and directed. |
| 119 | S&F for 150 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid as soil waste pipe in trenches and jointed or any other Situation, complete as all specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender