Tender For Provn Of Gd Room With Toilet And Allied Services On Klp Maintenance Gate Of 504 Asc Bn At Old Cantt Prayagraj.
Tender Value
28.60 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
57200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Gd Room With Toilet And Allied Services On Klp Maintenance Gate Of 504 Asc Bn At Old Cantt Prayagraj.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing nexc 15cm deep and getting out soft and loose soil complete all as specified and directed |
| 2 | M&L for Forming embankments including raising earth, spreading in layers not exc 30cm thick, watering, ramming/ rolling,consolidating with power roller of 8 to 12 tonne and finishing to required size, shape etc., not exc 1.5m high from base, complete all as specified and directed. (Note: Soil obtained from Ser item No. 3 & 4 shall be used including lead/transportation etc.) |
| 3 | Excavating over areas n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed. |
| 4 | Excavation in trenches not exc 1.5m wide and nexc 1.5m in depth for foundation, not exc 10sqm on plan and not exc 1.5m in depth and getting out soft and loose soil,complete all as specified and directed. |
| 5 | Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed. |
| 6 | Removing excavated soil exceeding 250 m but n exc 500m distance and depositing where directed at a level n exc 1.5 metre above the starting point . complete all as specified and directed. |
| 7 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed |
| 8 | M & L for Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed |
| 9 | M & L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed |
| 10 | M & L for Treating the top surface of filled earth as in floor at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed |
| 11 | M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed |
| 12 | M & L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed |
| 13 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed . |
| 14 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed |
| 15 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in lintel band/beams at any height complete all as specified and as directed |
| 16 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed. |
| 17 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas, shelves etc and the like, complete all as specified and directed. |
| 18 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed |
| 19 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed |
| 20 | Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed |
| 21 | Form work to soffits of suspended slabs such as roof slab etc. n.exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed. |
| 22 | Form work to chullah hood, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 23 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed |
| 24 | S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed. |
| 25 | M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,ribs and binders complete all as specified and as directed. |
| 26 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed |
| 27 | M&L for half brick thick wall fly ash bricks (old size), straight or curved on plan to any radius, built in cement mortar 1:4 incl provn of 2 Nos 8mm dia TMT bar at every 4th course of brick wall complete all as specified and as directed.Note :- Reinforcement bar shall be measured and paid seperatelyunder respective item of BOQ |
| 28 | M&L for 5 mm thick rendering in CM 1:3 on ceiling surface plaster complete all as specified and as directed. |
| 29 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and as directed |
| 30 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface,finished even and fair mixed with LWPC complete all as specified and directed. (LWPC shall be measured and paid separately) |
| 31 | Preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified. |
| 32 | Preparation of newly plastered surface of wall and applying two coats of interior acrylic emulsion over 1 mm thick wall putty and a coat of cement based primer complete all as specified and directed. |
| 33 | Material and labour for 1mm thick wall care putty with one coat of acrylic water based exterior grade primer @0.9 ltrs (undiluted)/10sq mtrs diluted with water 1:1 ratio on exterior surface. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed |
| 34 | Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved coulur with silicon additive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algai propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer's instruction complete all as specified and directed.Mame of Manufacturer : ASIAN/BERGER/NEROLAC or equivalent make as mentioned in Appx 'D'Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defect libality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same. |
| 35 | M&L for hardcore of gauge n exc. 63 mm of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 36 | M&L for 75 mm thick cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including necessary formwork and cutting of joints at interval of 3m and at corners and joint shall be filled with bituminous mastic compound grade 'A' complete all as specified and directed. |
| 37 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:4) complete all as specified and as directed. |
| 38 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed |
| 39 | M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 40 | M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed. |
| 41 | M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. (Note : WPC to be measured and paid separately under appropriate item) |
| 42 | Cleaning the dust,dirt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed. |
| 43 | M&L for Laying of minimum 3mm thick APP membrane of (reinforced with non-woven fabric polyester type wt not less than 150 gms/sqm) & minimum weighing 3kg/sqm shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.) |
| 44 | Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed. |
| 45 | M&L for preparation of new surface of APP membrane and treating/ applying two coat of heat resisting paint complete all as specified and directed. |
| 46 | S&F Factory made single extruded WPC (wood polymer composite) solid door/ window/ Ceosetry windows and other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (SUspension grade), Calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100 gms) fabricated with mitre joints after star headed SS Screws having minimum density of 750 Kg/ cum, screw withdrawl strength of 2200 N (face) & 1100 N (edge) minimum comp ressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant fixed in position with MS hold fast/lugs or SS dash fasteners shll be paid for seperately)Note :- For WPC Solid door/ window frames, minus -5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be paid.Make- Rajshri or equivalent. |
| 47 | S&F factory made extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter laminated both faces with PVC foil of 14 micron of overall 30mm thick comprising of virgin polymer of K value 58-60 (suspension Grade),calcium carbonate and natural fibre (wood powder / rice husk / wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100gms) having minimum density of 650 Kg/cum and screw withdrawl strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50N/m2, modulus of elasticity 850N/m2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in Charge .Note- Stainless steel butt hinges shall be paid separately. |
| 48 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 49 | M&L preparation of newl steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 50 | S & F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified. |
| 51 | M & L for PCC 1:3:6 type C-0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames complete all as specified and directed |
| 52 | S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose but area of each panel should not exceeding 0.25 Sqm. Door should be fixed with SS hinges and SS screws. Door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engr-in-charge.Note- Stainless steel wire mesh shall be measured and paid separately. |
| 53 | Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (109mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 54 | Providing and fixing factory-made uPVC white colour casement (openable) window suitable for openings up to 1.00 sqm, made from extruded uPVC profiles of wall thickness 2.3 mm (±0.2 mm). The window shall consist of multi-chambered hollow profiles as follows: frame section 60 mm × 58 mm, sash section 60 mm × 73 mm, T-profile section 60 mm × 74 mm (used between two shutters), and glazing bead 35 mm × 20 mm. All members shall be mitre cut and fusion welded at corners. Work includes drilling for hardware, provision for drainage, and fixing of all accessories. EPDM gasket of 1.2 mm (±0.2 mm) thickness shall be provided. Galvanised steel reinforcement shall be inserted as follows: frame 28 mm × 21.5 mm, sash 31 mm × 27.5 mm, and T-profile 27 mm × 17 mm. Frame shall be fixed to wall using 8 mm × 100 mm long anchor fasteners.Hardware shall include casement handles (zinc alloy, white powder-coated), butt hinges (zinc alloy, white powder-coated), and multipoint locking system with transmission gear of mild steel. Window shall accommodate 5 mm thick glass of approved make. |
| 55 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor excludes costof glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 56 | S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 57 | S&F for 200mm long stainless steel (SS 304) barrel tower bolt of extruded section complete all as specified and directed. |
| 58 | S&F 150mm longstainless steel (SS 304) handles, fabricated type complete all as specified and directed. |
| 59 | S&F 300mm long, stainless steel (SS 304) aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed. |
| 60 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with SS wire staples complete all as specified and directed. |
| 61 | S&F mild steel 150 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as specified and directed |
| 62 | S&F Floor door stopper of stainless steel (SS 304) body and tongue, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 63 | S&F fancy type drapery rod 20 mm dia stainless steel (SS 304) incl end brackets, and side brackets and latto, complete all as specified and directed. |
| 64 | Supply & Fix 5.5 mm thick Frosted sheet glass as in,shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 65 | Supply & Fix 5.5 mm thick plain sheet glass as in,shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 66 | S&F Vitreous china squatting pan of Orissa pattern of approved make of size 580mm x 440mm white with integral foot rest, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, including trap set in and including concrete bedding and connection to antisyphonage pipe etc, including making good to floor, complete all as specified and as directed. Make CERA Model No- Cable- S3020105 or equivalent in Kohler or Grohe |
| 67 | S&F for vitreous china wash and basin, white, flat back, size 620 mm x 480 mm x 185mm with pedestal fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed.Make- Jaquar Model No-FNS-WHT-40801 or equivalent in jaquar or Kohler |
| 68 | S&F stainless steel chromium plated Bottle trap having size 32mm with 250mm & 190mm long wall connection pipes an wall flange,complete all as specified and directed. |
| 69 | S&F vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spreader with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed. Make- Jaquar Model No- URS-WHT-13261 or equivalent in Kohler or Grohe |
| 70 | Supply and fix 1000 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed. |
| 71 | S&F PP-R pipe 20 mm bore, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge.The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete in all respects. |
| 72 | S&F PP-R pipe 16 mm bore, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge.The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete in all respects. |
| 73 | S & F PP-R Gate valves (brass insert) as per requirement of the site outer dia 20 mm complete all as specified and directed. |
| 74 | S&F 15 mm size long body bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified and directed. Make : Jaquar Cat Part No OPP-CHR-15037PM or Equivalent of Kohler or Grohe |
| 75 | S&F in repair 15 mm size angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed both end for iron pipes complete all as specified and directed.Make : Jaquar Cat Part No OPP-SSF-15053PM or Equivalent of Kohler or Grohe |
| 76 | S&F central hole basin mixer for WHB cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.Make : Jaquar Cat Part No CQT-CHR-23167B or Equivalent of Kohler or Grohe |
| 77 | S&F stainless steel chromium plated Tumbler Holder ,complete all as specified and directedMake- Jaquar Model No- CAN-CHR-1141N/ Grohe/ Kohler |
| 78 | S&F 350 ml coloured plastic Handwash dispenser, ABS body wall mounted, complete all as specified and directed. |
| 79 | S & F PVC connection 15mm bore 60cm long with brass nut at each side complete all as specified and directed. |
| 80 | S & F 600mm x 450mm bevelled edge mirror of selected quality glass , mounted on 6 mm commercial plywood thick and fixed to wooden plugs with chromium plated brass screws and cups washer complete all as specified and directed. |
| 81 | S & F 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all specified and as directed. |
| 82 | S&F 15mm bore stop valve fancy type chromium plated with long cup and shank (concealed type) screwed down, high pressure, with crutch or butterfly handle,screwed both end for iron pipe or for unions and fixed, complete all as specified and directed.Make- Jaquar Cat Par No- ALI-CHR-850583K orequivalent of Kohler/Grohe |
| 83 | S&F Overhead Rain shower SS 100 mm dia (4\\") with 200 mm (8\\") long shower arm and wall flange complete all as specified and directed.Make: CERA model no F7020109SS or equivalent in Jaquar/Grohe/Kohler |
| 84 | S & F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified and directed |
| 85 | S & F UPVC (SWR) 110 mm dia pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, fixed on walls complete all as specified. |
| 86 | S & F 75 mm dia UPVC (SWR) pipes TYPE -B Conforming to IS 13592 single socketed, in any length with rubber ring joints, laid in trenches or in floors including all type earth work complete all as specified. |
| 87 | S & F 75 mm dia UPVC (SWR) pipes TYPE -B Conforming to IS 13592 single socketed in any length with rubber ring joints fixed to walls complete all as specified. |
| 88 | S & F 110 mm dia UPVC (SWR) plain bends any radius complete all as specified and directed. |
| 89 | S & F 75 mm dia UPVC (SWR) bends any radius complete all as specified and directed |
| 90 | S&F 110mm UPVC junction single, (single T) equal or unequal with access door, complete all as specified and directed |
| 91 | S&F 75mm UPVC junction single, (single T) equal or unequal with access door, complete all as specified and directed |
| 92 | S & F 75 mm dia UPVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed |
| 93 | S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 94 | M&L for PCC 1:2:4 Type B-0 Using 12.5 mm graded aggregate as in coping oer drain etc, complete all as specified and directed |
| 95 | M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in surface channel or surface drain including forming and finishing with extra cement complete all as specified and directed. |
| 96 | Supplying, laying & jointing with appropriate method and testing in trenches DWCPE (SN 8) nominal size 150mm dia (ID)/ 180mm (OD) as per IS-16098 (Part 2): 2013 with and including all items and activities required depth to make sewer line functional including the excavated soil maintained in slope and well ramming and compacted in slope, complete all as specified and directed. |
| 97 | M&L for construction of Soak well exc in ordinary soil foundation in PCC 1:3:6 wells of honey combed and solid in M-25 concrete including intercepting chamber screen chamber brick work in CM 1:4 using old size brick, RCC cover slab in M-25 filling with brick bats complete of size 1.8mx4.5m deep all as specified and directed and shown on Drg No.- TD-576 sht 1/2 & 2/2. |
| 98 | Surface excavation not exc 30cm deep and averaging more than 15cm deep and getting out in soft/loose soil, complete all as specified and directed. |
| 99 | M&L for PCC 1:2:4 type B-1 (20mm graded aggregate) as in kerb around chequered tiles and paver block slightly rounded or chamfered angles and throating,complete all as specified and directed. |
| 100 | S&F outdoor heavy-duty vitrified tile of size 600 x 600mm and 20mm thick, anti-skid, UV-resistant, exterior grade, laid over and including 75mm thick PCC M-10 (using 20mm graded stone aggregate) as base layer with 20mm thick cement mortar screed bed in CM 1:4, tiles ser in cement slurry/adhesive as per manufacturers specifications, joints filled with polymer-modified grout of matching shade, including surface preparation, cutting to size, curing and finishing complete all as specified and directed. |
| 101 | M&L for laying or near ground level factory made Kerbstone of M-25 grade cement concrete in position to the required line, level and curature,jointed with cement mortar 1:3 including making joints with or without grooves including making drainage opening whereever required, complete all as specified and directed. |
| 102 | M&L for point wiring one light/fan point with PVC insulated FRLSH unsheathed single core cable of multistranded copper conductor of size 1.5 sqmm as phase & neutral drawn in and including PVC conduit medium grade not less than 20 mm dia, ISI marked, duly concealed to wall/floor or above false ceiling of suitable size with all fitting and accessories laid on wall/ceiling alongwith 1.5 sqmm stranded PVC insulated FRLSH unsheathed copper conductor (Green in colour) as earth wire and connected to common earth dolly for the following incl provn of electrogalvanised steel terminal switch box and white bakelite plastic laminated top sheet cover and fixed with brass screws cup washer for fixing switches/socket/regulators etc complete all as specified and directed |
| 103 | All as per item No. 102 above but for One 5 pin 5 amps socket outlet on same board with cables of size 1.5 sqmm |
| 104 | All as per item No. 102 above but for One 3/5 pin 5 amps socket outlet on independent board with cables of size 2.5 sqmm |
| 105 | All as per item No. 102 above but for One 6 pin 15/16 amps socket outlet on independent board with cables of size 2.5 sqmm for geyser |
| 106 | S&F switch piano flush button single pole one way 5 Amp complete all as specified and directed. |
| 107 | S&F socket outlet flush type 3/5 pin 5/6 Amps 230V AC complete all as specified and directed. |
| 108 | S&F switch piano flush single pole one way 15/16 Amps all as specified and directed. |
| 109 | S&F socket outlet flush type 5/6 pin 15 Amps 230V AC complete all as specified and directed. |
| 110 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed |
| 111 | S& F stepped type electronic fan regulator flush type complete all as specified and directed |
| 112 | S&F bulb holder complete all as specified and directed |
| 113 | S&F MCB DB SPN 8 way AC, 240 volts in sheet steel enclosure double door type complete all as specified and directed. |
| 114 | S&F MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 115 | S&F MCB, SPN, AC, 240 volts of 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 116 | Supply and fixing LED lights fitting 1x 20W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 117 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 118 | Supply and fixing LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 119 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 120 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) suitable for run on regulator complete all as specified and directed. |
| 121 | Supply and fix electric water heater, storage type polycarbonate body with SS inner tank glass lined and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc.complete all as specified and directed. |
| 122 | S&F desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size).(Steel body) complete all as specified and directed. |
| 123 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. |
| 124 | Supply, laying in trenches, connecting and testing LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm x 2 core complete all as specified and directed. |
| 125 | Supply, laying & testing for GI tubing medium grade 25 mm dia complete with all fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, ete.), in trenches, fixed to wallls complete all as specified and directed. |
| 126 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of dia 25 mm complete all as specified and directed. |
| 127 | Drilling and tapping existing CI/DI/GI water mains (in position) for branch connections of any dia complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender