Tender For Provn Of Vehcicle Parking Shed For Mt At Tactical Hq Galuthi Of 49 repair renovation Under Age(I) Cif (R )
Tender Value
9.62 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
15 days left
EMD
19240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Vehcicle Parking Shed For Mt At Tactical Hq Galuthi Of 49 repair renovation Under Age(I) Cif (R )
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 2 | Cement concrete 1:4:8 type D 2( using 40 mm Graded stone aggs) as in foundations, filling and mass concrete. |
| 3 | Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc confirming to Fe 290 ( gde E-165) all as specified. |
| 4 | S&F, steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 all as specified. |
| 5 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to Fe 290 ( gde E-165) all as specified. |
| 6 | Mild steel bolts.purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30 cm long |
| 7 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified |
| 8 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 9 | Preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome primer, complete all as specified and directed by engr-in-charge. |
| 10 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose Soil |
| 11 | Cement concrete 1:3:6 type C 2 using 40 mm Graded stone aggs as in foundations, filling and mass concrete. |
| 12 | Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 13 | M&L 75mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in Sub base all as spd and directed. |
| 14 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 15 | M&L for Machine pressed precast concrete interlocking paver block 80 mm thick (Factory made rubber moulded) with grey cement and pigment any shape and size conforming to IS-15658-2006 of 80 mm thickness, M-40 Grade fixed all as specified and directed . |
| 16 | Sand filling under floors or in foundations including watering and consolidation |
| 17 | M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in roof padding, lintels upto 1.5 m span,coping,fillets,bed plates,plinth courses,seismic bands and the like finished fair and even including necessary formwork complete all as specified . |
| 18 | Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ Nil during AOCNote:- Tenderers shall not quote for this Schedule Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender