Tender For Internal Periodical Services To Md Accn At Patiala Under Ge (S) Patiala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2026
19 days left
EMD
64000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal Periodical Services To Md Accn At Patiala Under Ge (S) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 3 | M&L for cement plastering 10mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and all as specified.Note : The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 6 | Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that specified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and complete all as specified and directed.Note : The application of Cementitious Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 7 | Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and complete all as specified and directed. Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified.Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C.Note : The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. |
| 8 | Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness, complete all as specified and directed.Yield: approx. 0.84 ltr/kg.System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79.Consumption of 2.1 Kg/Sqm/mmNote : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed |
| 9 | M&L for preparing old wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint. complete all as specified and as directed. |
| 10 | S&F in repair of frosted glass 4.0mm thick ordinary quality and glazing with oil putty to steel window and with wooden beads to wooden shutters in square not exc 0.5 sqm in each pane including hackiing out of old broken glass, complete all as specified and as directed.Note :- The rate quoted to include fixing of glass panes upto 3rd floor including taking down. |
| 11 | Complete removal of existing treatment of any type on walls complete all as specified and directed. |
| 12 | M&L for applying wall care putty in walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc (for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior/ internal painting complete all as specified and directed. |
| 13 | M&L for Applying two coats of oil bound distamper white or tinted with putty over a coat of primer on walls incl one coat of primer over & incl preparation of old/New surface of wall complete all as specified and as directed. |
| 14 | M&L for preparation of plastered or unplastered surfaces of Ceiling and applying three coats of white wash complete all as specified and directed. |
| 15 | M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of white wash complete all as specified and directed. |
| 16 | M&L for preparation of old plastered or unplastered surfaces of Ceiling and applying one coat of white wash complete all as specified and directed. |
| 17 | M&L for preparing existing treated surface of walls by filling wall putty in depression, sand papering, making the surface smooth and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 18 | M&L for preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 19 | Taking down of PVC water storage tank of of 300 to 500 ltrs capacity as located on terrace of the building complete all as specified and as directed. |
| 20 | Taking down of PVC water storage tank exc 500 but not exc 1000 ltrs capacity as located on terrace of the building complete all as specified and as directed. |
| 21 | S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs (ISI Marked) capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and as directed. |
| 22 | S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs (ISI Marked) capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed. |
| 23 | Taking down cement plaster from brick work or RCC surface and proper cleaning the surace with water and making efflorescence treatment by applying two layer of fastflex Dr. fixit over brick surface and including finally apply 10 mm thick plastering cement mortar in 1.6 with mixing of (URP 301) over treated surfaces and Applying thick wall care putty and applying two coats of oil bound distamper white or tinted over a coat of primer on walls & incl preparation of New surface of wall complete all as specified and directed. |
| 24 | S&F in repair of sheet glass 4mm thick selected quaity and glazing with oil putty in squars n exc. 0.5 sqm in each pane incl hacking out of old broken glass complete all as specified and as directed.Note :- The rate quoted to include fixing of glass panes upto 3rd floor including taking down. |
| 25 | Demolition of brick work or stone/ boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified and directed. |
| 26 | M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus complete all as specified and directed. |
| 27 | M&L for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement as and where directed complete all as specified and as directed. |
| 28 | M&L for applying 02 coats of exterior emulsion weather proof paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 10 sq.m/1.43litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender