Tender For special Repair To Service Road Near Bldg No P-161 To 415 Fd Hospital At Nams
Tender Value
22 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
1 days left
EMD
44000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Service Road Near Bldg No P-161 To 415 Fd Hospital At Nams
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled macadam or bituminous macadam surfaces in area exc 400 Sqm and depth exc 50mm deep but not exc 100mm deep complete, all as specified and directed. |
| 2 | Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer @ 5kg per 10 Sqm (VG-10) and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with 5.5% (paving bitumen VG-30) binder content by weight of total mix, rolled and compacted with 8 to 12 Tonne power road roller to required gradient and camber complete, all as specified and directed.Note :- (a) Material for SDAC shall be mixed in hot mixing plant.(b) Job mix formula of bituminous SDAC will be got done from approved lab.(c)Spreading of SDAC shall be done by mechanical sensor paver. |
| 3 | Material and labour Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber with using 20mm graded stone aggregate and paving bitumen @ 4% by the weight of total mix (consolidated thickness 75mm thick or less or as required) rolled and compacted with 8 to 12 Tonne power road roller to required gradient and camber complete, all as specified and directed. |
| 4 | Material and labour Premixed bituminous, macadam laid/rolled and compacted to required gradient and camber with using 20mm graded stone aggregate and paving bitumen @ 4% by the weight of total mix (consolidated thickness more than 75mm thick) olled and compacted with 8 to 12 Tonne power road roller to required gradient and camber complete, all as specified and directed. |
| 5 | Material and labour for preparation of top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt /dust etc and other deleterious, material and applying evenly a priming / tack coat using with bituminous primer of paving bitumen VG - 10 at the rate of 10 Kg per 10 Sqm, of road surface complete, all as specified and directed. |
| 6 | Material and labour for preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in center line and edge line road marking of 150/100mm width using 'Hot Mark' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder glass beads titanium dioxide calcium carbonate inter fillers thermoplastic requirment for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instruction complete all as specified and directed. |
| 7 | Demolition of cement contcrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | Material and labour Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface (Broken atone & boulder) complete all as specified and directed. |
| 9 | Material and labour for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. |
| 10 | Supply and fixing for machine pressed precast concrete interlocking paver blocks, coloured, 60mm thick M-35 Grade, any shape and size with grey cement and pigment conforming to IS 15658-2006 including 25mm thick layer of fine sand laid to the profile as filling and floors including watering and consolidation etc complete, all as specified and directed. |
| 11 | Material and labour for stone kerb of machine pressed factory made PCC 1:2:4 type B-1 using 20mm graded stone agg. as in precast kerb stone including rounded chamfered edge and set in CM 1:4 including two coats of synthetic enamel paint with pigment over a coat of primer. Complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 20, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender