Tender For Repair & Maintenance Of Buildings, Fencing, Periodical Services And Other Misc Works To E/M Installation Under Ge (West) Mathura
Tender Value
45 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Buildings, Fencing, Periodical Services And Other Misc Works To E/M Installation Under Ge (West) Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 2 | Demolition of brick work or stone/boulders masonary, built in cement mortor including all quoins, arches pillars, etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 3 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed by Engineer-in-charge. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed. |
| 5 | Taking down chowkhats with shutter (without taking off shutters from the frame) area not exc. 1.50 Sqm each complete all as specified and directed. |
| 6 | Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed. |
| 7 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each complete all as specified and as directed by Engineer-in-charge. |
| 8 | Refixing door shutters of any description having area exc 1.00 sqm but not exc 2.00 sqm, each in the same opening including easing of door / window / cup board shutters for easy closing / opening incl tighening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts etc complete all as specified and directed by Engineer-in-charge.Note :- Labour for taking down of shutter included in this item, nothing shall be paid extra. |
| 9 | Dismantling fibre sheet any description as in roofs etc including ridges complete all as specified and directed by Engineer-in-charge. |
| 10 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-charge. |
| 11 | Dismantling posts or struts ( wood, steel or RCC) embedded in concrete, brick work etc, any section and any length including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer-in-Charge. Note :- Dismantling of existing galvanised iron steel barbed wire/ chain link fencing shall be measured and paid for separately. |
| 12 | Dismantling chain link fencing of any guage & size not exc 4 Kg/Sqm complete all as specified and as directed. |
| 13 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and directed. |
| 14 | Excavating in post holes (or similar holes) each not exc 0.50 cum in soft / loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed by Engineer-in-charge. |
| 15 | M&L for Reinforced cement concrete (nominal mix) (1:2:4) type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors roofs landings canooies deck slab and in shelves and the like complete all as specified and directed. |
| 16 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of flat surface complete all as specified and directed. |
| 18 | M&L 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 19 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-Charge. |
| 20 | M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 21 | M&L for pre-polished chequered tiles (any colour) of size 30cm x 30cm x 25mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed. |
| 22 | M&L for vitrified paving tiles (any colour) of size 30cm x 30cm x 10mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 15mm screed bedding in cement mortar (1:4) complete all as specified and directed. |
| 23 | M&L for cement concrete (1:2:4) type B2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. |
| 24 | M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge. |
| 25 | All as per Srl item No 24.00 here-in-before but except brick.Note : Old serviceable brick retrieved from serial item No 2.00 of BOQ here-in-before shall be used under this item. |
| 26 | M&L for brick work with sub class ‘B’ old size burnt bricks in brick-on-edge walls (Less than 1/2 brick thick) built in CM (1:4) complete all as specified and directed. |
| 27 | S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 28 | S&F Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 29 | M&L for cement concrete type C-1, (1:3:6) using 20mm graded aggregate as in bed block or filling of chowkhats including necessary form work complete all as specified and directed. |
| 30 | M&L 35mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR Part-1 section 8.24 (a) complete all as specified and directed. |
| 31 | S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed. |
| 32 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed by Engineer-in-Charge. |
| 33 | S&F Factory Made Solid PVC Moulded Door Shutters 28-30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed. |
| 34 | S&F 150 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer-in-charge. |
| 35 | S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed by Engineer-in-charge. |
| 36 | S&F Aluminium sliding bolt of any description and type of size 300mm long complete all as specified and directed by Eng-in-charge. |
| 37 | S&F Aluminium handles cast type anodised of size 150mm size, complete all as specified and directed. |
| 38 | S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed. |
| 39 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge. |
| 41 | Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame and punching or drilling out old glazing pins/spring clips complete all as specified and directed by Engineer-in-charge. |
| 42 | S&F 4 mm thick figured (frosted) glass, ordinary quality glazing to aluminium door, window & partition including pad, gasket complete all as specified and directed. |
| 43 | S&F Factory made Steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of zinc chromate primer complete all as specified & directed by Eng-in-charge. |
| 44 | S&F Factory made Steel windows with side hung shutters including box type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of zinc chromate primer complete all as specified & directed by Eng-in-charge. |
| 45 | S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified & directed by Eng-in-charge. |
| 46 | M&L for glazed ceramic tiles (coloured) 450mm x 300mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) including necesary cutting as per site requirment complete all as specified and directed by Engineer-in-charge. |
| 47 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 48 | M&L for vitrified ceramic tiles light shade 8-9mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement screed bed in CM (1:4) complete all as specified and directed. |
| 49 | All as per item No 48.00 (here-in-before) above but as in skirting over 10mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 50 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for Shelves (veneering to wall) including 15mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 51 | M&L for rendering 10mm thick in CM 1:6 including water proofing compound on fair face of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.Note: Supply only liquid water proofing compound shall be measured and paid seperately under respective item of BOQ. |
| 52 | M&L for rendering 15 mm thick in CM 1:4 including water proofing compound on fair face of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.Note: Supply only liquid water proofing compound shall be measured and paid seperately under respective item of BOQ. |
| 53 | Supply only Liquid water proofing compound of approved complete all as specified and directed. |
| 54 | M&L for cement concrete (1:3:6) type C-1, using 20 mm graded stone aggregate as in surface channels or drain complete all as specified and directed. |
| 55 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engineer-in-charge. |
| 56 | Raking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc. complete all as specified & directed. |
| 57 | M&L for keyed pointing in cement mortar 1:3 to brick wall complete all as specified and directed. |
| 58 | S&F 70-80mm thick factory made precast RCC manhole / drain covers including frame made up of 40x40x6mm angle, of any size & shape (Squre /rectangular /circuler), heavy duty, out side, fixed at site etc complete all as specified and as directed. |
| 59 | M&L for applying rust remover @ 5-6 Sqm/ ltr, after cleaning to remove loose rust/scales/corrosion from reinforcement bars having specific Gravity 1.2-1.22. The material to be applied to the rusted metal using brush, allow it to react for 16-24 hrs & afterwards wire brushing the surface, clean with dry cloth before application of protective coating height upto 30 mtr including scaffolding and safety eqpt as required complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for fixing welded MS wire mesh weighing not less than 1 Kg/Sqm in soffit of slab and applying using mucis protezion ferro mono primer and anticorrosive primer uncovered steel and concrete surface chemical (Single component, cementitious corrosion inhibiting primer) on uncovered steel reinforcement and wire mesh having mixed density of 2.01-02.05, adhesive on bond strength- 1 N/mm touch drying time of 10-15 minutes and applying 20 mm thick cement mortar (1:4) with using integral water proofing liquid admixture for concrete mortar and integral water proofing compound for cement based concrete and mortar chemical 100/L 1.1-1.2 gm/cc, Cont/- |
| 61 | Cont/-chloride content nil as per IS 2645-2003 & using acrylic polymer base bonding agent and acrylic emulsion modifier and water based concrete bonding agent chemical STD having specific gravity of 1.02) in ratio as per recommendation of manufacture total chemical not less than 8 % by weight and providing single component polymer modifier using single component thixopropic fibre reinforced polymer modified repair mortar (1:1:4) to achieve compressive strength of 15 N/mm in 1 Day, 25 N/mm in 3 days, adhesion bond strength of > 2 N/mm height upto 30 mtr including scaffolding and safety eqpt as required complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L for applying compound concrete mixture obtained by adding to the correct dosage of accurately selected aggregate, a special high strength cement containing accelerating and highly fluidifying additives , high workability , corrosion resistant and very low water cement ratio, free from segregation and bleeding. eliminating the microcracking due to shrinkage on external or internal surface of RCC beam/ columns/facias/ any brick or stone inner or outer wall surface etc, having compressive strength as Bs 4551-80 thickness of 25-30mm with (1:4) cement mortar mixed wtih metallic aggregates compound (1:1) and strength (ASTM C 109)-80 Mpa@ 28 days,Tensile strength 2.0N/ mm2 @ 28 days (ASTM C 348)- 4Mpa @ 28 days, Young's modulus -27 KN/Sqmm(ASTM D469), Expansion charactristics(ASTM C 827-1987)Cont/- |
| 63 | Cont/-Unrestrained expansion upto 4% pressure to restrain plastic Expansion -Approx. 0.004 N/Sqmm , before pouring it is recommended to apply granolithic E-Resin based solvent free concrete bonding agent/EP in accurate proportion with complete homogenesity.Cementitious micro concrete having mix density of 1.45 to 1.5 Kg/litre, Compressive strength(BS 6319 Part-2)-40 Mpa at 7 days, Flextural strength (BS 6319 Part-3)-25 Mpa at 7 days, Tensile strength (BS 6319 Part-7)-15Mpa at 7 days, Bond strength(ASTM C 881)-11 N/sqmm at 7 days, having an over lay time of 03 hrs at 30 C. pouring of using suitable arrangement as required using pumping device for uniform flow of ensuring proper bond between the metallic aggregates (Mixed density @27OC) Approx. 0.004N/mm2. 10 - 12 x 10-6 / OC.1.5 W/mOC2200 - 2300 K and existing concrete substrate etc. complete including all tools and tackles height upto 30 mtr including scaffolding and safety eqpt as required complete all as specified and directed by Engineer-in-Charge. |
| 64 | Taking up or down 15mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 65 | Taking up or down 20mm dia, steel tubing & connections including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge. |
| 66 | S&F 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 67 | S&F 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 68 | Fixing only 15mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge.Note: GI tubing retrieved vide item No 62.00 shall be used under this item. |
| 69 | Fixing only 20mm bore old galvanised steel water tubing including cleaning with & including new fittings and fixed complete to walls and ceilings or laid in floors in new or old position complete all as specified and directed by Engineer-in-charge.Note: GI tubing retrieved vide item No 63.00 shall be used under this item. |
| 70 | S & F in repair 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 71 | Disconnecting existing tanks of capacity exc 500 ltr & not exc 1000 ltr, setting aside (or lowering if required) for repairs and cleaning & removing all scale and dirt etc, from tank and from mouths of circulating pipes and hoisting and re-fixing in same or other position complete all as specified and as directed by Engineer-in-charge. |
| 72 | S &F for rotational moulded polythelene water tanks triple layer white colour (cylindrical vertical with closed top) hoisted and fixed in position for 750 ltr. storage capacity including disconnecting and taking down old unserviceable tanks and ball valve complete all as specified and directed. |
| 73 | S&F 20mm dia PTMT ball PVC valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Eng-in-charge. |
| 74 | S&F in repair 20mm dia PTMT ball PVC valve, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Eng-in-charge. |
| 75 | S&F in repair 20mm Gate valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed. |
| 76 | S&F in repair PVC water tank cover for any capacity of PVC water tank fixed with suitable bolt & nuts complee as directed. |
| 77 | S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete including taking down old unserviceable PVC pipe with fittings complete all as specified and directed. |
| 78 | S&F in repairs PVC waste pipe 32mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed. |
| 79 | S&F in repairs urinal waste pipe 40mm dia of length 0.8mm to 0.9mm fixed complete all as specified and directed. |
| 80 | S&F in repair chromium plated shower rose with or without swivel joints including fixing to steel pipe of 100 mm size complete all as specified and directed by Eng-in-charge. |
| 81 | S&F in repair 450mm long PVC connection suitable for 15 mm bore with PTMT nuts on both sides complete all as specified and directed by Engineer-in-charge. |
| 82 | S&F in repair 15mm bore CP angle valve, fancy type, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge. |
| 83 | S & F in repair for 15mm bib tap standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed by Eng-in-charge. |
| 84 | S & F in repair for 15mm angle cock standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed by Eng-in-charge. |
| 85 | S&F in repair 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge. |
| 86 | S&F in repair vitreous china squatting pan Orissa pattern, white of size 580x440mm with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, PCC filling and connection to trap and flushing pipe, antisyphonage pipe etc complete all as specified and directed by Engineer-in-charge. |
| 87 | S&F in repair 10 litre capacity PVC valveless symphonic action type low level flushing cistern (ISI marked) including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed by Engineer-in-charge. |
| 88 | S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia, 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including CI brackets complete all as specified and directed. |
| 89 | S&F pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 90 | S&F in repairs pillar taps (fancy type), of 15 mm dia, cast copper alloy, with capstan heads, with chromium plated, screwed down high pressure with or without lettered 'hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 91 | S&F in repairs vitreous china urinal Half stall type, white incl CP spreader screwed for iron pipe and fixed complete including providing and fixing plugs with and including 60mm long brass screws, pointed around urinal back in cement, fixing discharge pipr, flush pipe, grating and union for discharge complete all as specified and directed by Eng-in-charge. |
| 92 | S&F in repair stainless steel grating 100mm bore size fixed with white cement complete all as specified and directed by Eng-in-charge. |
| 93 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 94 | M&L for preparation of new steel surface already treated with primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 95 | M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge. |
| 96 | M&L for preparation of old painted steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge. |
| 97 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 98 | M&L for preparartion of new plastered surfaces of walls and applying two coats cement base paint on walls complete all as specified and directed. |
| 99 | M&L for preparation of newly plastered surfaces of walls and applying two coat of of exterior emulsion paint of Dark Shade, complete all as specified and directed. |
| 100 | M&L for preparation of old painted surface of any discpription and applying one coat of exterior emulsion paint of Dark Shade, complete all as specified and directed. |
| 101 | M&L for complete removal of existing treatment and preparation of old surfaces of walls and applying two coats of cement based paint on walls etc complete all as specified and as directed. |
| 102 | M&L for complete removal and preparation of old painted surfaces of wall and applying two coat of exterior emulsion paint dark shed for height upto 30 mtr including scafolding and safety precautions complete all as specified and directed. |
| 103 | M&L for bands, straps, supports or stays for rainwater, Ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and lintle hanges, large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 104 | S&F in repair brass chromium plated tubular towel rail 20mm dia; 'D' type, 600mm long between flanges fixed to plug with chromium plated brass screws including wooden or plastic cleat complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc complete all as specified and directed by Engineer-in-charge. |
| 106 | S&F green PVC fibre sheet of 2mm thick fixed with coach screw and washer in roof/ wall complete all as specified and directed. |
| 107 | S&F MS screw bolt 05 to 10mm dia, length of bolt exceeding 5cm but not exceeding 10 cm long machine made with hexagonal or square head at one end and screwed the other or serewed both ends, each screwed end fitted with washer and one hexagonal or square nut complete all as specified and directed by Engineer-in-Charge. |
| 108 | M&L for PCC (1:3:6) type B-1 using 20mm graded stone aggregate as in bed plates of vertical steel posts etc and similar works including necessary form work complete all as specified and directed. |
| 109 | Supply only mild steel galvanized chain link fencing of any mesh, size and type complete all as specified and directed by Engineer-in-charge.Note:- (i) Flat iron, round bars, nut bolts and washer shall be measured and paid for separately. (ii)The payment shall be made to the contractor for actual weight ascertain by the BOO as odered by GE. |
| 110 | Fixing only mild steel galvanized chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as specified and directed by Engineer-in-charge.Note :- Supply only chain link fencing shall be measured and paid for separately under respective item of BOQ. |
| 111 | S&F in repair galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and directed by Engineer-in-charge.Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment. |
| 112 | M&L for Mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 113 | S&F mild steel round bars 10mm dia, cut to length, bent to shape as in tie bar fixed to chain link fencing including necessary welding where required as per site requirement & other similar works conforming to Fe-290 (Gde E-165) complete all as specified and directed by Engineer-in-charge. |
| 114 | Taking down mild steel gate of size area exc 10 sqm but not exc 30 sqm each, straightening, bent up steel sheet and refixing the same in the same opening by grouting pintel hinges in PCC 1:2:4, greasing etc complete all as specified and directed by Engineer-in-charge.Note : Necessary mild steel angle iron work, mild steel plates work, pintel hinges etc if required shall be measured and paid seperately under resepective item of BOQ. |
| 115 | S&F mild steel framed work as in doors / gates / steel frames etc. of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position of quality Fe 290 (Gde E-165) complete all as specified and directed by Engineer-in-charge. |
| 116 | M&L for food grade epoxy coating and highly to hard, durable and highly protective barrier to avoid algal fungal and bacterial growth with interior removing algae, moss and loose particles using a wirebrush. The surface should be saturated surface dry before application, before coating necessary, filling cracks joints and holes with plymer modified mortar, applying the coating in two coats, the second coat should be applied in cross direction to the first coat after dried of 4-6 hours, curing if reqd as per manufacturer’s instructions need to done properly all as specified and directed incl necessary scaffolding and safety eqpt required to complete the work, all included no extra payment shall be allowed for scaffolding and safety eqpt. height upto 30 mtr including scaffolding and safety eqpt as required complete all as specified and directed by Engineer-in-Charge.Make : Dr Fixit Fastflex, Sika top seal 107 or equivalent as approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender