Tender For Replacing Damaged Raw Water Pipeline And Drinking Water Pipe Line From Near Commercial Sub-Division To Club And Replacing Damaged Sewage Line Along With Manholes At Club Bbmb Slapper.
Tender Value
12.75 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
10 days left
EMD
25510
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacing Damaged Raw Water Pipeline And Drinking Water Pipe Line From Near Commercial Sub-Division To Club And Replacing Damaged Sewage Line Along With Manholes At Club Bbmb Slapper.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling, disjointing, removal of G.I. pipe lines,specials,valves and fittings complete in all respects. ( g ) 65mm internal diametre pipe line. |
| 2 | Dismantling, disjointing, removal ofG.I. pipe lines, specials, valves and fittings complete in all respects. ( e ) 40 mm internal diametre pipe line. |
| 3 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects.(c) 25 mm internal diametre pipe line |
| 4 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects.( b ) 20 mm internal diametre pipe line |
| 5 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete ( g ) 65 mm i/d |
| 6 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete ( e ) 40 mm i/d |
| 7 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete ( c ) 25 mm i/d |
| 8 | Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete ( b ) 20 mm i/d |
| 9 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( g ) 65mm i/d G.I. Union |
| 10 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( e ) 40 mm i/d G.I. Union |
| 11 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( c ) 25mm i/d G.I. Union |
| 12 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. ( b ) 20mm i/d G.I. Union |
| 13 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. ( g ) 65mm i/d Gun Metal peet valve heavy pattern. |
| 14 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. ( e ) 40 mm i/d Gun Metal peet valve heavy pattern. |
| 15 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. ( c ) 25mm i/d Gun Metal peet valve heavy pattern. |
| 16 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. ( b ) 20 mm i/d Gun Metal peet valve heavy pattern. |
| 17 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. (i) Triple Layer Tanks |
| 18 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. (b ) G.I. tank nipple 20 mm i/d |
| 19 | Providing and fixing in position automaticbrass Ball Cock in tanks (B) Brass Ball Cock with rod and Plastic Ball (ii) 20 mm i/d |
| 20 | Dismantling of Flexible Pavements (By Mechanical Means) ( a ) Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications |
| 21 | Patch Work with Bituminous Macadam 50mm to 75mm thickness (Grading II) ( a ) Providing and laying patch work with bituminous macadam 50mm to 75mm thick using crushed stone aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% in Continuous type hot mix plant, carriage of mixed material to site of work, laid after trimming the pot hole, removal of failed material, laying by suitable means and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 504 of MORT&H specifications |
| 22 | Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect ( a ) Earth work upto 1.5 m. Depth for ( i ) All classes of soil except rocky |
| 23 | Dismantling of manhole chamber including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site including disposal of unserviceable material within 100 m as desired by Engineer-in-charge. ( a )Rectangular manhole 75x120 cm and 45 cm deep |
| 24 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials and disposal of unserviceable materials within 100 m. as desired by Engineer-in-Charge. ( b ) 150 mm Diametre |
| 25 | Dismantling concrete (d) Cement concrete plain1:2:4 mix |
| 26 | Cement concrete 1:2:4 ( a ) With stone ballast or shingle ( i ) mixing by manual means |
| 27 | Cement concrete 1:5:10 ( b ) With stone aggregate 40mm gauge ( i ) mixing by manual means |
| 28 | Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring. ( A ) D.I. Pipe as per IS 8329 DI-K7 ( c ) 150mm i/d pipe lines laid complete |
| 29 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:2 (1 cement : 2 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete ( A ) For pipes 100 to 250 mm Diametre |
| 30 | Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard designcomplete in all respects. ( a ) Inside size 75x120 cm and 120 cm deep |
| 31 | Providing & fixing Fire Hydrants with jointing including all carriages complete. (without Fire Hydrant surface box) Size80mm complete in all respect. (b) C.I Fire Hydrants S.V. Type IS-909 |
| 32 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. |
| 33 | 12.5 mm thick cement plaster 1:4 |
| 34 | Providing, fixing and jointing ISI Marked Gun- Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. ( i ) 100 mm i/d Gun Metal peet valve heavy pattern. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender