Tender For Repair And Renovation And Electricfication Work Of One Suit At Krishna Atithi Grah In District Mathura
Tender Value
4.65 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
46000
Bank guarantee accepted
Document Fee
770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mathura → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation And Electricfication Work Of One Suit At Krishna Atithi Grah In District Mathura
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters. As per DSR S.I. No. 15.56 |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. AS per DSR 13.88 |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). As per DSR 6.1.1 |
| 4 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand). As per DSR S.I. No. 13.1.1 |
| 5 | Black granite Polished stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Black Granite Stone quality. As per DSR No. 11.23.4 |
| 6 | Providing and fixing of With float glass panes of 5.50 mm thickness glazing in Z-section, windows, doors, ventilator shutters and partitions etc. with Glass putty/beading etc. complete. As per S.I. No. 21.3.3 |
| 7 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading. As per DSR S.I. No. 9.7.8 |
| 8 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR 13.80 |
| 9 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :. As per S.I. No. 13.41.1 |
| 10 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. As per S.I. No. 13.46.1 |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. As per S.I. No. 13.62.1 |
| 12 | French spirit polishing Two or more coats on new works including a coat of wood filler including cost of all materials, labour T&P etc. required for proper completion of work.m As per S. I. No. 13.68.1 |
| 13 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. As per DSR No. 15.25 |
| 14 | Dismantling tile work in floors and roofs laid (Wall Tiles) in cement mortar including stacking material within 50 metres lead For thickness of tiles above 25 mm and up to 40 mm. As per DSR No. 15.23.2 |
| 15 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. As per S.I. No. 11.37A |
| 16 | Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto2.00 sqm). 9.147A1.1 |
| 17 | Providing and fixing of 20 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. As per S.I. No. 18.8.2 |
| 18 | Providing and fixing of 25 mm nominal outer dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. As per S.I. No. 18.8.3 |
| 19 | Waterproofing of toilet etc complete |
| 20 | Supply & fixing of Jaquar make Mixer including all material and labour etc complete. FLR5309 |
| 21 | Supply & fixing of Jaquar make Soap dish including all material and labour etc complete. AKP 35731. |
| 22 | Supplying & Fixing 750mm x 20mm C.P. brass towel rail with C.P. brass brackets fixed to plastic sleeves with C.P. brass screws. Make Jaquar AKP35711. |
| 23 | Providing and fixing of 15 mm nominal bore of C.P. brass stop cock of standard design and of approved make conforming to IS:8931. As per Chapter No. 23 SL 25 (Jaquar Make-FUS29053). |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR S.I. No. 18.48 |
| 25 | Providing and fixing water closet squatting pan (European type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (As per Market Rate). |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps. (As per Market Rate). |
| 27 | Providing and fixing of 110 mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. As per DSR S.I. No. 12.41.2 |
| 28 | Providing and fixing of 15 mm nominal bore of C.P. brass bib cock of approved quality conforming to IS:8931. As per Chapter No. 23 SL 22. (Jaquar Make-FUS29037 |
| 29 | Providing and fixing Angle Cock ALI SSF 85053 |
| 30 | Providing and fixing 1200x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender