Power Boards / Undertakings / PSU Closing in 0 days TDR #56331834

Tender For Shifting Of Pole And Line In The Area Of Amausi Zone Under Deposit Scheme 2025-26.

Issued by Boards / Undertakings / PSU · Lucknow, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Jul 2026
0 days left
EMD
3.10 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Shifting Of Pole And Line In The Area Of Amausi Zone Under Deposit Scheme 2025-26.

BOQ

Name of Work:- Shifting of Pole and Line in the area of Amausi Zone under deposit scheme 2025-26.
Sl. No. Item Description
1Supply and erection of following material
211 KV fuse set
3Aluminium Binding Wire
4Danger Board with clamp
5PG clamp
6Barbet Wire
7Bolt & nut
8MS Guarding angle
9Cross Bracing
10Clamp with nut bolt
11GI Pipe 6'' Dia
12GI Pipe 4'' Dia
13DB box three phase with clamp
14Earth wire clamp with nut bolt
15LT clamp with nut and bolt
16Piercing Connector
17Dead End Clamp
18LT Fuse Set (upto 100KVA)
19LT shackle insulator
20Bracing Angle 33 KV
21Aluminium Lug 630 sqmm
22Number Plate
23Denger Board With Clamp
24Aluminium Paint
25Red Oxid Paint
26Safe loading Carriage & unloading of following material from store centre to pit site/JE dump store approx. 35 Km.
27STP Pole 11 Mtr Long
28PCC Pole 8.5 Mtr Long
2933 KV F bracket
3033 KV polymeric 'Disc fitting
3133 KV polymeric 'Disc Insulator
3233 KV Polymeric pin Insulater with nut
3333 KV V type X-arm MS Angle 65x65x6 mm
3433KV Dropper Channel
3533KV T-off Channel
3633KV Top Channel
37Stay Set Complete
3811 KV F bracket
3911 KV polymeric 'Disc fitting
4011 KV polymeric 'Disc Insulator
4111 KV Polymeric pin Insulator with nut
4211 KV V type X-arm MS Angle 65x65x6 mm with Clamp
4311kv Dropper Channel
4411kv T-off Channel
4511kv Top Channel
46MS Earthing Rod Complete
47ACSR Panther Conductor
48ACSR Dog Conductor
49Stay Set Complete
5033 KV XLPE cable 3x300 sqmm
51Cable S/th termination box 3x300 sqmm
52O/D cable termination box 3x300 sqmm
53O/D cable termination box 3x185 sqmm
54Cable S/th termination box 3x185 sqmm
5511 KV XLPE cable 3x185 sqmm
56AB conductor 3x120
57LT Cable 1x630 Sqmm
58GI Wire 6 SWG
59GI Wire 8 SWG
60Erection & Stringing and Sagging of 11 KV & LT line
61Erection of PCC 8.5 mtr long Single pole with all accessories (All necessary item like clamp, Nut bolt, Top channel, Dropper channel, Base angle, etc. will be provided by the contractor at his own cost)
62Erection of PCC 8.5 mtr long Double Pole with all accessories (All necessary item like clamp, Nut bolt, Top channel, Dropper channel, Base angle, etc. will be provided by the contractor at his own cost)
63Erection of ST Pole 11 mtr long Double Pole with all accessories (All necessary item like clamp, Nut bolt, Top channel, Dropper channel, Base angle, etc. will be provided by the contractor at his own cost)
64Erection & painting of S.T. single pole 11 mtr. Long all necessary accessories ( All necessary item like clamp, Nut bolt etc. will be provided by the contractor at his own cost). Painting of new erected ST pole with two coat of paint PO red paint at top of pole 2 mtr. & balance by two coats of best quality aluminium paint.
65Erection of all accessories of pole (All necessary item like pin insulator, disc insulator, fitting, cross arm, clamp, Nut bolt, Top channel, Dropper channel, Base angle, etc. )
66Mounting of 100 KV T/F form dump place to newly constructed Double pole/Plinth & its commissioning including jumpering with all system ((All the required material for above job shall be provided by contractor except T/F)
67Mounting of 25 KV T/F form dump place to newly constructed Double pole & its commissioning including jumpering with all system ((All the required material for above job shall be provided by contractor except T/F)
68Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. Brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be filled from the ground level up to 15 centimetres below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15 centimetres. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand.(All the material to be arranged by the contractor).
69Construction of retaining wall, fabrication and erection of wire mesh fencing of size 3+3 and 2.0 mtr height around T/F and distribution pillar box with retaining wall and 01 no. gate with locking arrangement made of MS angle iron of size 50x50x6 mm jointed with the nuts and bolt. The panel must be supported with MS flat of size 50x6 mm wire mesh of size 10 SWG rectangle type.
70Stringing & Sagging LT XLPE aluminium cable of size 1X400 sq.mm
71ACSR Panther Conductor stringing sagging binding and jumpering of with all accessories
72ACSR Dog Conductor stringing sagging binding and jumpering of ABC with all accessories
73Hoisting of 11 kv XLPE (3x 185)sq.mm with the provision of G.I. Pipe of size 160 mm dia.
74Hoisting of 33 kv XLPE (3x300) sq.mm with the provision of G.I. Pipe of size 160 mm dia.
75Grouting of Pole in deep 1/6 the length of Pole in ratio 1:4:6 in cement sand & bla ST
76Grouting and Nuzzling of 11 KV / 33 kv stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (sand, brick blast & cement). All material except stay wire shall be supplied by the contractor.
77Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule. All material except earthing rod shall be supplied by the contractor.
78Earthling by way of Boring and lowering the \\"B\\" class GI pipe (Jindal ) of 50mm dia from ground upto water level not less than 20mtr as per standard practice
79Laying of 11KV XLPE single cable 3x185 sq mm by drill method. (Only cable will be provided by the department.)
80Laying of 33KV XLPE single cable 3x300 sq mm by drill method. (Only cable will be provided by the department.)
81Installation of 33 kv O/D cable box (3x300). All material shall be supplied by the Department.
82Installation of 33 kv S/Th cable box (3x300). All material shall be supplied by the Department.
83Installation of 11 kv O/D cable box (3x185). All material shall be supplied by the Department.
84Installation of 11 kv S/Th. cable box (3x185). All material shall be supplied by the Department.
85Stringing & Sagging ABC (3X120+1X95+1X16 Sqmm)
86Disconnection of consumer's electricals connection (If service cable required it shall be supplied by the contractor).
87Reconnection of consumer's electricals connection (If service cable required it shall be supplied by the contractor).
88Dismantling of old & used (Existing) material and loading, Carriage & unloading from site to JE Dump store/store centre, Lucknow.
89Dismantling of line as per Site Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56331834
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 13-07-2026
Authority
Authority Name Madhyanchal Vidut Vitran Nigam Limited
Work Description Tender for Shifting Of Pole And Line In The Area Of Amausi Zone Under Deposit Scheme 2025-26.
Basic Detail
Tender No 38/SE(T)AMAUSI ZONE/2026-27
Bidding Type Tender
Location
City Lucknow
State Uttar Pradesh
Key Dates
Publish Date 06 Jul 2026
Submission Date 13 Jul 2026
Open Date 13 Jul 2026
Finance
Tender Value Ref. Documents
Tender Fee 5900
EMD 3.10 Lakhs
Exemption Not Available
Document List
5051ee17-a3ac-416b-bdaf-d852d53c5837.html
BOQ_2188802.xls
TenderDoc.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Jul 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Today

Tender Documents

Download All (ZIP) ↓
html

5051ee17-a3ac-416b-bdaf-d852d53c5837.html

xls

BOQ_2188802.xls

pdf

TenderDoc.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders