Tender For Protection Of Hindon Aquaduct At Farukhnagar Under 200 Cusec Delhi Water Supply Maintenance Scheme.
Tender Value
54.85 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
6 days left
EMD
1.10 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Protection Of Hindon Aquaduct At Farukhnagar Under 200 Cusec Delhi Water Supply Maintenance Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | PROTECTION OF HINDON AQUADUCT |
| 2 | Cleaning of roller bearing of aquaduct and painting and greasing complete including all material, labour, T&P etc. complete and scaffolding etc. complete. |
| 3 | Chipping of unsound/weak concrete material(like plaster, loose concrete, oil, rust, dust, and other impurities ) from RCC surface with manual Chisel and or by standard power-driven percussion type of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per the direction of Engineer-In-Charge |
| 4 | Removing all existing unsound/loose material like plaster,loose concrete,loose particle,oil,dust and other impurities etc manually by chisel and hammer from rcc conduit surface. Making Rcc surface thoroughly cleaned using wire brush and water including disposal of debris outside of pipeline. |
| 5 | Cleaning of Joints including removing of baker rod, filling and all other loose materials from the expansion joint and clean the surface around the joint to make it free from loose particles,dirt,oil,grease etc and disposal of malba/debris outside of pipeline including all labour,T&P etc complete. |
| 6 | Drilling and fixing injection packers in RC members including, Drilling Holes: Drilling holes in structural members at intervals as per the recommendation of the engineer in charge.Cleaning of holes: Clean the holes with air blower before fixing nozzles. Fixing of Packers: Insert 12 mm dia., 50~75 mm long injection packers in cleaned holes with moisture-insensitive epoxy resin-based putty or equivalent. Cutting of Packers: Cut the Packers by wheel after grouting completion without damaging structural elements.Patching Hole:- After cutting off the packer we patch the hole on epoxy putty. |
| 7 | Supply and apply single component, Polyurethane Injection foam based system for wet conditions and temporary sealing, which cures to a dense flexible foam with a fine cellular structure. Minimum Product Requirements:Viscosity cps 500-1300 at 23°C |
| 8 | Supply and apply 2 components, elastic, low viscous, solvent-free, Polyurethane Injection resin based system for permanent sealing, that does not need the presence of water for hardening reactionProduct Requirements:The viscosity of the mixture < 100 mPa•s (at +20°C) Capable of penetrating cracks>0.2mm wide with a CE Marking (European Conformity) -> Conformance label that the product is approved to the essential requirements and under market surveillance |
| 9 | Filling the joints with Polystyrene baker rod of the size next higher to the joint gap and apply Polyurethane based sealant in the expension joint up to a depth equal to not less than 1/2 the width of the joint including insert of bitumen impregnated board as filling material,T&P etc. complete. |
| 10 | Supply and apply two coats of sodium silicate-based quick setting cement mortar to prevent leakage in the place system Similar Product Make: Sikafloor® curehard-24 or its equivalent completion as per the direction of the engineer in chargeConsumption: 0.25 kg/m2 per coat |
| 11 | Application of rust remover cum passivator (Restolene) on steel bars and also application polymer (Build Crete) in two coats on steel bars (sika rustoff -100) or its equivalent completion as per the direction of the engineer. Consumption: 0.150 kg/m2 per coat |
| 12 | Providing and applying the epoxy-based bonding agent on the dry and prepared surface. Product: Sikadur®-32 LP or its equivalent Consumption: 0.45kg/m2 Product requirements: mixed density: 1.70kg/ltr; shear strength > 10MPa. |
| 13 | Providing, mixing and applying polymer modified cement concrete/mortar at an average thickness of 10-12 mm in multilayers, including making smooth surface with wooden tools etc complete as per specification and directions of enginner in charge. Similar Product Make: SikaLatex®-SBR or its equivalentConsumption: 10% by weight of cementProduct: specific gravity- 1.02, mixing ratio -1:5 (SikaLatex: water) other material as per grade, density - 2300 kg/m3 |
| 14 | Providing, mixing, and applying Latex polymer-modified cement concrete in the ratio (1:1.5:3) (with polystyrene-based epoxy system, and furane system to be used as per the direction of the manufacturer), including making smooth surfaces with wooden tools, etc complete as per specification and directions of the engineer in charge. Similar Product Make: SikaLatex®-SBR or its equivalentConsumption: 10% by weight of cementProduct: specific gravity- 1.02, mixing ratio -1:5 (SikaLatex: water) other material as per grade, density - 2300 kg/m3 |
| 15 | Providing, mixing, and applying two coats of protective epoxy coating over finished and dry surfaces. Similar Product Make: Sikagard®-67 or its equivalentConsumption: 0.25 kg/m2 per coatProduct requirements: mixed density: 1.22kg/ltr; |
| 16 | Making scaffolding and dismantling the same after completion of work including cost of material, labour, T&P, transportation etc. required for proper completion of work. |
| 17 | Finishing / Painting of the external surface of walls with premium acrylic smooth exterior paint (asian apex Ultima paint or its equivalent) of approved shade to give an even shade in two coats after applying priming coat of cement primer including all material, labour T & P etc. |
| 18 | Dismantling of old damaged stone pitching and re-stone pitching 22.50 cm. thick required work and preparing surface complete inside slopes of Hindon river bund excluding cost of stones but including carting of stones from one place to site of work including supply of labour, T&P etc. |
| 19 | Raised and cut pointing on stone work with 1:3 cement and fine sand mortar including all material, labour, T&P etc. |
| 20 | CLEANING OF BIG JHUND AND SNATCHING OUT OF PLANTS |
| 21 | Cleaning of big jhund, bush, wood plants upto 3.0m height including uprooting of rank vegetations etc. and including disposal of same within 250m distance. |
| 22 | Cutting of branches of trees along the pipe line including all labour, T&P and scaffolding etc. rerquired for proper completion of work. |
| 23 | Labour cess@1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender