Tender For Upgradation Of Washrooms At Panchayat Halqa Theed A
Tender Value
1.56 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
3 days left
EMD
3120
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Washrooms At Panchayat Halqa Theed A
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. 15.23.1 For thickness of tiles 10 mm to 25 mm |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 15.2.2 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | P/ applying 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 6 | Structural steel built up section for frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 7 | Providing and fixing of ceramic glazed tile 5mm thick of approved brand make in all colour shades over a 20 mm thick bed of cement mortar 1:3 mix jointing with grey cement slurry pointing in white cement |
| 8 | Providing and laying rectified Glazed Ceramic floor tiles of size as directed by EIC (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 9 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 11 | Finishing walls with water proofing cement paint of required shade on old work i/c primer coat (two or more coats applied @ 3.84 kg/10sqm) |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, Two or more coats i/c With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work\ |
| 13 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 14 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin with single 15 mm PTMT pillar cock. 550 x 400 mm size |
| 16 | Providing and fixing of PVC pipes incl. bend ,Tee,floor trap etc complete job 75 mm dai |
| 17 | Providing and fixing of mirror of superior quality and standared size as directed by EIC |
| 18 | P/f cp fittings i/c cost of all necessary fitting complete Bib cock |
| 19 | ball valve |
| 20 | Provision for electrical fitting P/F of lighting points as well as lighting circiut incl. point wiring through conduits with 1 mm Multi Standard copper wire of approved make forlight points incl. cutting chases and making good the wall, cost of 10 amp MCB, conduits, switch pannel, complete job. |
| 21 | P/F 6/16 2 phase ISI mark polycab, anchor or equilant make |
| 22 | 10 - 20 amp MCB 3 no with box i/c all necessary fittings |
| 23 | Painting of wall with SBM Guidelines including the cost of paint complete job |
| 24 | Add Provsion for Signboard, Photographs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender