Housing Urban and Rular Development Local Bodies Closing in 5 days TDR #56330609

Tender For Construction Of Community Bathroom W.No 4, Pyt Bhatodi, Block Duggain Under St Plan Ut Capex Budget Fy 2026-27 Tender Cost 2.00 Lac

Issued by Local Bodies · Kathua, Jammu and Kashmir
Tender Value
2 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
5 days left
EMD
4000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kathua → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Community Bathroom W.No 4, Pyt Bhatodi, Block Duggain Under St Plan Ut Capex Budget Fy 2026-27 Tender Cost 2.00 Lac

BOQ

Name of Work:- Construction of Community Bathroom W.no 4, Pyt Bhatodi, Block Duggain Under ST Plan UT Capex Budget FY 2026-27 Tender cost 2.00 lac
Sl. No. Item Description
1Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA Name of Work;- Construction of Community Bathroom W.no 4, Pyt Bhatodi, Block Duggain Under ST Plan UT Capex Budget FY 2026-27 Tender cost 2.00 lac Contract NO:- ST plan under UT Capex 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 meter from cutting edge and disposal of surplus excavated earth as directed:
3Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
4Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% boulder
5Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete
6Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.
7Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
8Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls Under 20 cm wide
9Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces
10Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)
11Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
12Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1 cement: 2 coarse sand : 4 graded stone aggregates 20mm nominal size.
13Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
14Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and medium tensile steel bars
1515mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) Inside
1612 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) Outside
176 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
18Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m
19Providing and laying/fixing ceramic Glazed Floor tiles 300X300mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete.
20Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete.
21Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats over and including priming coat with water thinnable cement primer)
22Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
23Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work Two or more coats on new work
24Providing and fixing white vitreous china pedestal type water closet (European type W.C .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solid plastic seat and lid.
25Providing and fixing G.I pipe to IS ( Medium Class) with fitting upto 150mm dia & above shall be MS 7mm thick confirming to IS : 3989 including Synthetic enamel paints of approved quality and shade over a coat of approved priming coat ( Shade as per colour code ) and clamps and flange including cutting & making good walls complete.(internal and Exposed on walls)& includes testing of joints. 20mm Dia Pipe
26Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
27Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931
28Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931
29Providing and fixing Cp grating of approved quality 100 mmof nominal dia
30Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes 75 mm diametre
31Add Provission for Citizen information Board including painting writing etc. all complet job and (Without detailed measurements of CIB board will not draw any kind of amount)
32Carriage of Sand and Bajri avg. distance 30.00 Km by M.T and by A.T 2.00 KM
33Carriage of Cement avg. distance 50 Km by M.T A.T 2.00 KM
34Carriage of Bricks avg. distance 80.00 Km by M.T and A.T 2.00 KM Total in Figures Excess(+) 1.0 Full Conversion INR 200460.5 200460.5 INR Two Lakh Four Hundred & Sixty and Paise Fifty Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56330609
AUTHORITY Local Bodies
TENDER VALUE 2 Lakhs
LAST DATE 13-07-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of Community Bathroom W.No 4, Pyt Bhatodi, Block Duggain Under St Plan Ut Capex Budget Fy 2026-27 Tender Cost 2.00 Lac
Basic Detail
Tender No e-NIT No.80/REW/K of 2026-27 Dated 24/06/2026
Bidding Type Tender
Location
City Kathua
State Jammu and Kashmir
Key Dates
Publish Date 06 Jul 2026
Submission Date 13 Jul 2026
Open Date 14 Jul 2026
Finance
Tender Value 2 Lakhs
Tender Fee 500
EMD 4000
Exemption Not Available
Document List
03504509-5c01-4594-b3db-8b21db74f401.html
BOQ_1019129.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Jul 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

03504509-5c01-4594-b3db-8b21db74f401.html

xls

BOQ_1019129.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders