Tender For Special Repairs To Road Furniture & Berms Of Cod ,506 Abw, Mcmm And Other Areas Of Ge (East) And Special Repair To Internal Road At Signal Record & Rtwa Birbal Enclave Under Ge (East) Jabalpur
Tender Value
84.12 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
27 days left
EMD
1.51 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Road Furniture & Berms Of Cod ,506 Abw, Mcmm And Other Areas Of Ge (East) And Special Repair To Internal Road At Signal Record & Rtwa Birbal Enclave Under Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Manufacturing, supplying and fixing in repairs Retro reflective regulatory sign board of size 1.50mm X 1.0 meter made out of 2mm thick aluminium sheet, fully covered with intensity Prismatic (HIP) reflective sheeting ,Type IV conforming to ASTM D -4956 . The reflective sheeting shall be fixed using pressure senstive adhesive as recommended by Manufacturer concerned complete all as specified and directed.All letters,borders,colours and symbols shall conform to IRC 67. The aluminium sheet shall be mounted on a stainless steel (SS -304) square post of size 65*65*3 mm or dia of SS pipe 65 mm with base plate and anchor bolts.The Supprt length of Post Upto 4.0 mtr .embedded in PCC (1:3:6) complete with excavation , PCC base and backfilling . The rear surface of sheet shall be painted with two coat of epoxyprimer and two coats of grey synthetic enamel paint. Work shall be carried out as per MORTH Specifications ( Clause 801&802) complete all as specifed and directed |
| 2 | Manufacturing, supplying and fixing in repairs Retro reflective Cautionary/warning sign board of equilateral triangular shape having each side of 900mm with support length of 3650mm and made up of 2mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activatd retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-Ingual), symbols and borders etc as per IRC 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01 and fixing the same with suitable sized alluminium alloy rivets @ 20cm c/c to back support frame of M.S angle iron of size 25x25x3mm along with theft resistant measures, mounted and fixed with 2 Nos MS angles of size 35x35x5mm to a vertical post complete all as specified and directed. |
| 3 | M&L for 15mm thick cement plaster in CM 1:4 on brick or concrete walls surface incl finished surfaces shall be even and smooth without using extra cement complete all as specified & directed. |
| 4 | Excavation in post holes (or similar holes) each not exceeding 0.50 cum in soft/loose soil, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering & removing surplus soil to a distance not exceeding 50 m & making good surface. Complete all as specified & directed. |
| 5 | Providing & Fixing in repair Road Delinater , made from high impact ABS thermoplastic body, ABS Body,1.0-1.2m height ,having 03 reflective panels of size 100 mm *300mm each,fixed on to opposite faces .Reflective panel shall be of 3M Diamond grade DG3 Reflective sheeting,conforming to IRC67-2012 &ASTM Type XI standards .Delineater body shall be UV-stablized black ABS With provision for bolting /grouting Complete all as specified & directed. |
| 6 | M&L for preparing bituminous surfaces of road & marking 2.50 mm thick centre lines, stop lines, dashes, arrows etc. & the like not exceeding 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge. |
| 7 | Supply & Fixing in repair cat eye solar reflective type of metal body alloy of size 100 mm x 100 mm x 20 mm with PAMA striplens reflector fixed with & including MS stud of suitable size as per manufacturer's instructions. Complete all as specified and directed by the Engineer-in-charge. |
| 8 | Supply & Fix in repair solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer's instructions etc. all as specified & directed. |
| 9 | S&F in repair ABS Body, 100 cm outdoor convex mirror good quality as approved by GE fixed in road/ground portion complete including hanging/fixing arrangement with adequate mounting arrangement at suitable height on stainless steel (Grade 304) round pipe, having unbreakable Polycarbonate Convex Lens with hoods as the traffic safety mirror for eliminating blind spots & increase visibility at a broader angle, including excavation for post holes, PCC Type C-2 1:3:6 (using 40 mm graded stone aggregate) in post hole & removal of surplus excavated material to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point. Complete all as specified & directed. Make: Frontier 100 cm outdoor Convex Mirror, FMCO-100, Road Star, Real reflectors, Alexix, ACE polymers (India) or Equivalent. |
| 10 | M&L for Moorum/Red Bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled & rammed including watering. Complete all as specified & directed. |
| 11 | M&L for Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface. Complete all as specified & directed. |
| 12 | Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all specified and directed. |
| 13 | M&L for Cement Concrete Type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete. Complete all as specified and directed. |
| 14 | M&L for Sand filling under floors or in foundations including watering & consolidation. Complete all as specified and directed. |
| 15 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles. Complete all as specified and directed. |
| 16 | M&L for Brickwork with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in 1:6 cement mortar. Complete all as specified & directed. |
| 17 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete |
| 18 | M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & no pigment. Complete all as specified and directed. |
| 19 | M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 80 mm thickness M-40 Grade with grey cement & no pigment. Complete all as specified and directed. |
| 20 | Dismantling stone slabs & tiles of any description or thickness in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed |
| 21 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400Sqm and depth n exc 50mm by using mechanical scarifier complete all as specified and directed. |
| 22 | M&L for repair to potholes, any depth, not exc 1.0 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed. |
| 23 | Preparing existing black top surface by brushing with wire brushes for removing caked mud etc.blowing with mechanical blower to remove all loose dirt etc.from surface complete all as specified and as directed. |
| 24 | Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 Sqm complete all as specified and as directed. |
| 25 | Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 Sqm complete all as specified and as directed. |
| 26 | M & L for premix bituminous macadam using paving bitumen any penetration @ 4% by weight of total mix, laid / rolled compacted to required gradient and camber (consolidated thickness 75mm or less as directed) complete all as specified and as directed. |
| 27 | M&L bitmuminous premixed asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by wt of total mix using paving bitumen laid with mechenical paver, rolled and consolidated to reqd camber and gradient complete using hot mix plant and spreading with paver complete all as specified and directed. |
| 28 | M&L for preparation of existing bituminous road surfaces by removing dust, dirt grease and other foreign matters etc and after prepration of road surfaces, applying road marking having minimum 2.5 mm average thickness with & including thermo plastic (Reflective) line marker paint/ compound of uniform surface finish conforming to BS 3262 (Part-I) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/ yellow colour and super imposed with glass beads conforming to BS 6088 read in conjuction with the MOST specification 803 clause 4.3.3 complete all as specified and directed.Make of Road Marker Paint/ Compound:- Asian or Thermoline as approved by GE.Notes:- (i) MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by GE.(ii) Shape, size & pattern of marking shall be as approved by GE. |
| 29 | S&F in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 30 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles as in walls/parapet walls, removing grass fungus weed roots of trees completely, grown on roof surface complete all as specified and directed. |
| 31 | M&L providing Precast cement concrete in type B1 1:2:4 (20 mm graded agg) in kerbs and edging to road ,divder and footpath etc incl necessary earthwork with plain fair faces, incl chamfered wheathering, throating etc and setting in cement mortar 1:4 complete with joints to match |
| 32 | M&L for Moorum/Red Bajri filling in floors or pavings, laid in layers not exceeding 10 cm thick, spread, levelled & rammed including watering. Complete all as specified & directed. |
| 33 | Schedule of credit amount of Rs 43925.00 to be deducted during AOC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysAug 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 34 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender