Tender For Periodical And Mechanised Services To Md/Otm Accn Of Zone -‘A Including External Periodical Services Of Otm/Md Accn In Area Of Age B/R-I Under Ge (East) Lucknow
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical And Mechanised Services To Md/Otm Accn Of Zone -‘A Including External Periodical Services Of Otm/Md Accn In Area Of Age B/R-I Under Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete all as specified & as directed. |
| 2 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint complete all as specified & as directed. |
| 3 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint complete all as specified & as directed. |
| 4 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil emulison distemper (OBD) complete all as specified & as directed. |
| 5 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of oil emulison distemper (OBD) complete all as specified & as directed. |
| 6 | M&L for complete removal of existing treatment including cleaning of motar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of oil emulsion distemper (OBD) of approved shade/tint on walls/ceiling etc complete all as specified and directed. |
| 7 | M&L for preparation of old surfaces (plastered or unplastered) of walls/ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of acrylic emulsion paint (exterior grade), complete, all as specified & as directed. |
| 8 | M&L complete removal of existing treatment including cleaning of motar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of acrylic emulsion paint (exterior grade) of approved shade/tint on walls/ceiling etc complete all as specified and directed. |
| 9 | M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 10 | M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 11 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 12 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed |
| 13 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement motar (1:6) etc including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 14 | M & L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces of wall in cement motar (1:4) etc including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 15 | M & L for rendering 5mm thick in patches in cement mortar in 1:3 on ceiling including taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 16 | M & L for preparation of newly plaster surfaces of wall and applying two coat of acrylic distemper with one coat of primer on wall/ceiling etc all as specified and directed. |
| 17 | M & L for preparation of newly plaster surfaces of wall and applying two coat of cement base paint with one coat of primer on wall/ceiling etc all as specified and directed. |
| 18 | M & L for preparation of newly plaster surfaces of on ceiling applying three coat white wash all as specified and directed. |
| 19 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed. |
| 20 | Complete removal of existing treatment by scrapping with Wall Sander having mechanical vacuum mechanism having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\"/9\\" to make the surface free from dust loose paint etc complete all as specified and directed. NOTE: 1. The Item No 20, 21, 22 and 23 here-in-after shall by executed through authorised applicator of OEM under provision of a tri-party MoU (Contractor, authorsied applicator of OEM and manufacturer of materials)2. The above mentioned MoU shall be submitted to GE (through Engr-in-Charge) for Go-ahead before execution of work. 3. Please note that quoted unit rate shall be deemded inclusive and no extra cost shall be paid for above mentioned provisions. |
| 21 | M & L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm, over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and Sanding of the putty surface with wall sander having mechanical vacuum mechanism having RPM not less than 1500, sannding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust complete all as specified and directed. Step 1) Mix the putty powder by adding 40-50% water and mix it with mechanical Putty mixer having power min 1400 W and havinng mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute).Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray putty application machine having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041\\" Step (3) Allow 6-8 hrs time to dry the putty surface. NOTE: Ref Notes given under item No 20 above. |
| 22 | M & L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes as per manufacturer instructions complete all as directed. NOTE: Ref Notes given under item No 20 above. |
| 23 | M & L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance with low VOC less than 50 G/L, Anti Algae properties in two coats @ 1.79 ltr (undiluted)/10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray paint application machine having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surface before application of subsequent coats complete all as specified and directed. NOTE: Ref Notes given under item No 20 above. |
| 24 | M & L for applying 2 to3mm thick wall care putty after removal of existing treatment by scrapper on wall/ceiling surface complete all as directedNote : Stack measurement of wall care putty in bags kept at site and shall be entered in MB and firstly paid as \\"material laying at site\\". Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender