Tender For Provn Of Bdy Wall Gate And Allied Wk At Mt Of Age E/M And Provn Of View Cutter And Rain Water Shed For 24B Mvg And Provn Of Drain Near Bldg No P-11 To Outside Of Bdy Wall Near P-52 (Hrdc Bldg) At Hq Mupsa And Addn/Altn To Kitchen Flooring
Tender Value
29.62 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
20 days left
EMD
59240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Bdy Wall Gate And Allied Wk At Mt Of Age E/M And Provn Of View Cutter And Rain Water Shed For 24B Mvg And Provn Of Drain Near Bldg No P-11 To Outside Of Bdy Wall Near P-52 (Hrdc Bldg) At Hq Mupsa And Addn/Altn To Kitchen Flooring Pvc Wall Panelling And Allied Works Of 26 Kb And Provn Of View Cutter For Family Qtr Mil Stn Barabanki Under Age Br-I Of Ge (East) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed. |
| 3 | M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6mtr mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed. |
| 5 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 6 | Removing excavated material not exc 50mtrs and depositing where directed at level not exc 1.5 mtrs above trhe starting point all as specified. |
| 7 | M&L for reinforced cement concrete 1:1.5:3 (Nominal mix) using 20 mm graded aggregates as in footing, complete all as specified and as directed. |
| 8 | M&L for reinforced cement concrete 1:1.5:3 (Nominal mix) using 20 mm graded aggregates as in beams complete all as specified and as directed. |
| 9 | M&L for reinforced cement concrete 1:1.5:3 (Nominal mix) using 20 mm graded aggregates as in column complete all as specified and as directed. |
| 10 | M & L for mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 11 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 12 | M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed. |
| 13 | M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed. |
| 14 | M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair complete all as specified and directed. |
| 15 | M & L preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified. |
| 16 | S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc complete all as specified and directed. (each line wire to be measured) |
| 17 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165. complete all as specified and directed. |
| 18 | M &L for ornamental mild steel framed structural work as in doors or gates of angle or ther section with gusset plates, rairls braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or slinding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing of Fe-410-0 (Gde E- 250 complete all as directed by Engr-in-Charge. |
| 19 | M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide complete all as specified. |
| 20 | Excavating in post holes soft/loose soil (or similr holes) not exc0.5 Cum getting out returning filling in and reamming earth or broken rubble mixed with earth around, in layers not exceeding 25 Cum watering and removing surplus soil to a distance no exc 50m and making good surfaces |
| 21 | M & L for providing plain cement concrete, type B-2, 1:2:4 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 22 | S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed. |
| 23 | S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed. |
| 24 | S & F of rolled mild steel sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafters, running rails, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-410W Grade E-250 complete all as specified and directed. |
| 25 | M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks (red) complete all as specified and directed. |
| 26 | M & L for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed. |
| 27 | M & L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks.lawn, drive ways or light traffic parking etc of required strength, thickness & size/shape, made by table vibratory method using PU moud , laid in required colour & pattern over and including 30 mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in- Charge. |
| 28 | Surface dressing not exc. 15 cm deep as in soft / loose soil complete all as specified and directed. |
| 29 | M & L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even and rough complete all as specified and directed. |
| 30 | M & L for 18 – 20 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish inculding laying over 15 mm thick screed bed layer in cement mortar 1:6 complete all as specified and directed. |
| 31 | M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 32 | S&F for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc,.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-410W Gde E-250 complete all as specified and directed . |
| 33 | Supply only hot dip galvanized (HDG) chain link fencing of size 75mmx75mm and having superior long term rust protection (45-60 microns thickness), woven steel fences typically a diamond pattern durable weather resistants as per IS-2731 complete all as specified and directed. |
| 34 | Fixing only chain link fencing including flat iron fillet any mesh,size and type to any type of standard rails,straining bolts etc,including provision of biding wire complete all as specified and directed. |
| 35 | S & F of mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, not exc. 05 cm long and dia of neck 5 to 10 mm dia complete all as specified and directed. |
| 36 | M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 37 | S&F Colored Polycarbonate Sheets 6mm thick (multi wall) as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 38 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping and benching of drain etc. all as specified and directed. |
| 39 | M & L for preparation of newly plastered or un-plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 40 | M & L for providing pre-cast cement concrete landing, cover slabs, chullah hoods, chajjas, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and setting in cement mortar 1:6 including necessary form work complete all as specified and directed. |
| 41 | M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed. |
| 42 | M&L for RCC drain hume pipe 300mm dia NP3 including collars complete all as specified and directed. |
| 43 | Taking down cement plaster on brick walls / ceiling incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 44 | M&L for rendering 15mm thick in CM 1:6 brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and directed. |
| 45 | M&L for preparation of new plastered surfaces and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, over a coat of 2mm thick putty of required shade and colour complete, as per manufacturer's specification over Complete all as specified and directed |
| 46 | M&L for Complete removal of exiting treatment and applying two coats of oil bound distemper over one coat of 3 mm thick wall care putty of wall incl preparation all as specified and directed. |
| 47 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises |
| 48 | M&L for 40mm thick PCC 1:2:4, type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth without using extra cement, complete, all as specified & directed. |
| 49 | S&F vitrifield ceramic tiles dark shade 10mm thick (Square/rectangular) polished area of each tile exc 0.42 Sqm but n.exc 1.00 Sqm in floor etc laid over 15 mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. |
| 50 | S&F vitrifield ceramic tiles dark shade 10mm thick (Square/rectangular) polished area of each tile exc 0.42 Sqm but n.exc 1.00 Sqm on wall tiling/dado etc laid over 10 mm thick rendering in CM 1:4 as in vertical surfaces as approved incl etc. complete all as specified & directed. |
| 51 | S&F vitrifield ceramic tiles dark shade 10mm thick (Square/rectangular) polished area of each tile n.exc 0.36 Sqm as in floor etc laid over 15 mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified and directed. |
| 52 | M&L for Ist class Exterior floor tiles of size 600x600x10 mm thick of approved colour and shade laid over 15mm thick screed bed in C:M 1:6 complete all as specified and as directed. |
| 53 | Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc., laid, bedded and pointed, in any mortar complete all as specified & directed. |
| 54 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified & directed. |
| 55 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete |
| 56 | S&F in repair 19mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work complete all s specified and directed. |
| 57 | S&F in repair 12mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work complete all s specified and directed. |
| 58 | M&L for 0.9mm thickness decorative laminate type 1(mica) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions etc complete all as specified and directed. |
| 59 | S&F 12mm thick plain Gypsum board false ceiling with GI frame work including all necessary drilling , cutting to fix electrical items as under:-(a) GI sheet channel 30x25x20mm of 24 Gauge fixed with rawl plug and screws 450mm centre to center alongwith perimeter of walls.(b) GI sheet channel made to shape 50x40x40mm of 24 gauge placed @ 600mm centre to centre from perimeter of wall except long wall (in one span)(c) GI sheet intermediate runners of size 45x10x10mm of 24 gauge fixed @ 1200mm centre to centre leaving frame of one side wall (in other span)(d) GI sheet 25mm wide & 20mm gauge suspenders fixed with steel fasteners to roof, ceiling @ 1200mm centre to centre incl plugging in RCC slab.(e) Fixing of 12mm thick gypsum boards, filling joints with P.O.P and finishing complete with two coats of distemper oil emulsion paint over one coat of 1mm thick puty on ceiling.Note : Measurement of ceiling will be flat. |
| 60 | S&F of hollow PVC Wall panelling 5-6mm thick any color/ desigened PVC sheet inclusive of nails and fixing at site on wall and PVC L/U-beading at top, bottom of wall lining,corner of wall,opening eadge of door & windows matching with panel as per specifications and drawing complete all as specified and as directed. |
| 61 | S&F of WPC louvers ( dual shade ) 8-10mm thick for wall lining of any color inclusive of nails and fixing at site on wall and designer WPC L/U-beading at top, bottom of wall lining,corner of wall,opening eadge of door & windows matching with panel as per specifications and drawing complete all as specified and as directed. |
| 62 | S&F 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and fixed with SS etc complete all as specified & directed. |
| 63 | S&F in repair vitreous china wash down water closet pan (Pedestal pattern EWC), wall mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed. |
| 64 | S&F in repairs brass chromium plated Wall mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality without telephonic shower. complete all as specified & directed. |
| 65 | S&F in repair 15mm bore high Rain Flow Overhead Shower of 100mm with150mm Arm complete all as specified & directed. |
| 66 | S&F in repair Counter top wash hand basin of size 495 x 395 x 150 mm complete all as specified & directed. |
| 67 | S&F in repair 15mm bore CP brass Pillar cock long body with wall flange complete all as specified & directed. |
| 68 | S&F in repair CP brass 32 mm dia waste coupling of 130mm height for WHB complete all as specified & directed. |
| 69 | S&F in repair 15mm bore CP brass Angle Valve stop cock with wall flange complete all as specified & directed. |
| 70 | S&F in repair soap dish complete all as specified & directed. |
| 71 | S&F in repairs CP towel rack fancy type with brass screws, complete all as specified and as directed by Engr-in-Charge. |
| 72 | S&F in repairs glass shelf assembly complete all as specified & directed. |
| 73 | S & F in repair for CP bib taps 15mm fancy type long body Chromium Plated cast copper alloy with crutch or half/quarter turn handle complete all as specified. |
| 74 | S&F in repairs CP brass toilet paper holder fixed to wall with chromium plated brass screws of approved quality complete all as specified & directed. |
| 75 | S&F CP Grating doom 110/125mm dia with \waste hole of (minimum weight 40 gms) |
| 76 | S & F of 20mm outer dia Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with bends on walls/ceiling or laying in floors incl taking up or down steel tubing and connectionscomplete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender