Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #56328022

Tender For Smart Periodicals Services Using Methodology In Otm Under Ge Saugor

Issued by Statutory Bodies & Commissions/Committees · Sagar, Madhya Pradesh
Tender Value
48.55 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
13 days left
EMD
97100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Smart Periodicals Services Using Methodology In Otm Under Ge Saugor

BOQ

Name of Work:- SMART PERIODICALS SERVICES USING METHODOLOGY IN OTM UNDER GE SAUGOR
Sl. No. Item Description
1M&L for complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechancical sander machine and make free from dust, loose paint etc by skilled labour complete all as specified and directed.Note :The mechancical sander machine shall have mechanical vacuum mechanism and RPM not less than 1500 with sanding pad dia of 7\\"/9\\"and of 80 grit.
2M&L for applying 1mm average water proof cement based putty @1kg (undiluted) per sqm on plastered /old prepared surface of wall using fully automatic airless spray machine and sanding when dry with 240 grit sandind pad using mechanical wall sander to make the surface even, smooth, clean, free from dust and ready to receive finishing primer/paint coat complete all as specified and directed. Note : (i) Putty powder shall be mixed with water as per manufacturer's recommendation/instruction using mechinical putty mixer having mixing capacity of min 2.5 kg putty per minute and allow 6-8 hrs time to dry the putty surface.(ii) Fully automatic airless spray machine shall have 1 litre per minute minmum flow speed and 3300PSI pressure Make : Birla white / JK putty/ Burger
3M&L for one coat of acrylic water based exterior grade primer @ 0.9litre(undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface before painting of subsequent coats complete all as specified and directed.Make : Asian(Appex Altima)/ Berger(weather coat all Gaurd)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions
4M&L for applying two coats of water based premium acrylic smooth exterior emulsion of approved colour over primed surface with fully automatic airless spray machine complete all as specified and directed.Allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.Make : Asian(Appex Altima)/ Berger(weather coat all Gaurd)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Fully automatic airless spray machine shall have 1 litre per minute minmum flow speed and 3300PSI pressure (iii) The emulsion shall have silicon additive excellent dirt pickup resistance with low VOC ( less than 50), Antifungal/ Anti Algai properties.(ii) Emulsion not less than 1.79 litre(undiluted)/10 Sqm in two coats shall be used. It can be diluted as per manufacture's instructions
5Notes for Srl item No 1 to 4:-The smart painting work under this contract for periodical services shall include the following and the rates quoted by the bidders shall include the same:-(i) The smart painting work under this contract shall be executed by authorised applicator of one of the manufactors mentioned in contract. The L-1 bidder shall produce the name brand of material and it manufacturer within 10 days from the date declaration of L-1 bidder alongwith a triparty. (ii) The Memoradum of Understanding\\" (MoU) shall be between contractor, manufacturor and the authorised applicater. MoU shall be on Rs.100 Non Judicial stamp paper, wherein the manufacturer shall own the responsiblity of use primium quality product in adiquate quantity (as per standarded coverage area of product), high standered workmeship and its' warrantee for five years. The contractor shall produce such warantee in writing along with similar warrantee on manufactor's letter head. The contractor shall also produce purchase vouchers/ Invoice for all product/ material utilised in work for their full quantity and Engg-in-charge shall ensure to capt a copy of the same in record duly defaced by him. Purchase vouchers/ invoice must be recorded in measurment book.(iii) The contractor shall arrange all required T&P, scaffolding, trestles, ladders, cradles etc, necessary protective measures for execution of work. (iv) The contractor shall ensure covering to doors, windows, floors, fittings etc to protect them from splashes. After painting work, washing floors, cleaning glass, joinery, electric fittings, wirings etc. Drops and splashes of paint shall be cleaned to the entire satisfaction of Engineer-in-charge.(v) One room shall be painted as sample/ modle room for approval of GE and GE prior to carrying out further work.(vi) Non submission of MoU or any denile in providing MoU with in specified period shall sufficent ground to reject the Bid on contractor's default.
6Taking down cement plaster / cement lime plaster any description on brick or stone walls, ceiling,etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
7M&L for cement plaster in two layers on brick/stone masonry surfaces or surfaces other than fair face of brick work, first layer 15mm thick in cement mortar (1:6) and second layer 5mm thick in cement mortar (1:4) with and including water proofing compound @3% by weight of cement finished the surfaces even and smooth without using extra cement complete all as specified and directed.
8M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall complete all as specified and directedMake : Asian(Apcolite)/ Burger(self breath easy)/ Nerolac (nerolac Immpession HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge.
9M&L for one coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed
10M&L for one coat of synthetic enamelled paint on old painted steel based surface of any desription over 10cm width or girth including preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed
11M&L for repair of distrubed/ broken brick holes in walls with CM 1:6 including filling of narrow interstices with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) after and including removal / root out of trees,plants, truncks,grasses and creeps etc from roof or wall , finished with 15 mm plaster in CM(1:6) including finishes the surface with same finish complete all as specified and directed.
12M&L for two coat of white wash on old decorated surface of walls including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection of Engg-in-charge.
13S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall or in trenches including mild steel clamps wherever required complete all as specified and directed
14S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.
15S&F in repairs 75 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps of suitable size complete all as specified and directed.
16S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.
17S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radious , with acces door, complete all as specified and directed.
18S&F 75 mm dia PVC(SWR) junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.
19M&L for one coat of paint on old decorated surface of walls with acrylic emulsion including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection complete all as specified and directed.
20M&L for two coat of paint on old decorated surface of walls with acrylic emulsion including preparation of surface (i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc) and washing floors, cleaning glass , joinery , electric fitting, etc after painting work complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection complete all as specified and directed..
21M&L for two coat of plastic emulsion paint on old decorated surface of walls including preparation of surface (i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc) and washing floors, cleaning glass , joinery , electric fitting, etc after painting work complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection complete all as specified and directed..
22M&L for two coat of cement base paint on old decorated surface of walls including preparation of surface (i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc) and washing floors, cleaning glass , joinery , electric fitting, etc after painting work complete all as specified and directed.Note : Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire setisfection complete all as specified and directed..
23Supply only liquid water proofing compound for mixing in cement mortar or PCC complete all as specified.Note : (i) The WPC compound specified in any item of this BOQ or ordered by Engineer-in-charge (if not mentioned in BOQ item but technically required shall only be measured and paid under this item.(ii) Contractor shall provide purchage vouchers for full qunatities incorporated in the work and Engineer-in-charge shall keep defaced purchage voucheres in record and entered the same in MB
24M&L for writing letters of figures in Roman, Italic or Indian of height not exc 30cm as directed with thick enamelled paint of approved colour complete all as specified and directed.
25M&L for writing stops, commas, shortlines, dashes, hyphen, brackets, etc with thick enamelled paint of approved colour complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56328022
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48.55 Lakhs
LAST DATE 22-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Smart Periodicals Services Using Methodology In Otm Under Ge Saugor
Basic Detail
Tender No GE/SGR/TOK-29 OF 2026-27
Bidding Type Tender
Location
City Sagar
State Madhya Pradesh
Key Dates
Publish Date 06 Jul 2026
Submission Date 22 Jul 2026
Open Date 24 Jul 2026
Finance
Tender Value 48.55 Lakhs
Tender Fee 500
EMD 97100
Exemption Available
Document List
PS_TOK29.pdf
Tendernotice_1 (2).pdf
17e5513f-b907-4bae-8547-9878da256229.html
BOQ_869845.xls
GP_SCTOK_29.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 22, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Jul 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
pdf

PS_TOK29.pdf

pdf

Tendernotice_1 (2).pdf

html

17e5513f-b907-4bae-8547-9878da256229.html

xls

BOQ_869845.xls

pdf

GP_SCTOK_29.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders