Tender For Provision Of Toilet Blocks For Agniveers At Various Camps Under Ge Panaji, Goa.
Tender Value
6.60 Crore
Estimated cost
Bid Submission
10 Aug 2026
30 days left
EMD
6.55 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Toilet Blocks For Agniveers At Various Camps Under Ge Panaji, Goa.
BOQ
| Sl. No. | Item Description |
| 1 | Lumpsum BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CHIEF ENGINEER PUNE ZONE Nature of Work: PROVISION OF TOILET BLOCKS FOR AGNIVEERS AT VARIOUS CAMPS UNDER GE PANAJI, GOA Contract No: CA NO. CEPZ/MUM/TOKEN-08 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | SCH 'A' PART-I To IXNote: This schedule is pre-priced by MES and the rate indicated under Col 5 signifies this fact only |
| 3 | Total amount of Sch 'A' Part-I (Building and Structures) |
| 4 | Total amount of Sch 'A' Part-II (Site Clearance, Excavation and Earthwork) |
| 5 | Total amount of Sch ‘A’ Part III (Internal Water supply) |
| 6 | Total amount of Sch ‘A’ Part IV (Internal Electric Supply) |
| 7 | Total amount of Sch ‘A’ Part V (Road, Path and Culverts) |
| 8 | Total amount of Sch ‘A’ Part VI (Sewage Disposal) |
| 9 | Total amount of Sch ‘A’ Part VII (Area Drainage) |
| 10 | Total amount of Sch 'A' Part-VIII (External Water Supply) |
| 11 | Total amount of Sch 'A' Part-IX (External Electric Supply) |
| 12 | SCHEDULE 'A' PART-X (MISCELLANEOUS B/R AND E/M WORKS)Note: This schedule is not pre-priced by MES and the rate indicated as \\"Rs 0.00\\" under Col 5 signifies this fact only. |
| 13 | M&L for two way Bib taps fancy type chromium plated 15mm dia cast copper alloy with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed |
| 14 | S&F of Brass Tee (3/4 X 1/2 ) Reducer of 20mm outer dia for CPVC pipe complete all as specified and as direcetd. |
| 15 | S&F of Lamp holder, PVC/Polycarbonate type with cord grip cap including 9 Watt LED Bulb 230 volt for pendant fittings complete all as specified and as direcetd. |
| 16 | S&F LED light fitting type with high out put diffuser 4 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as direcetd. |
| 17 | M&L for two coats of Anti Corrosive paint over one coat of red oxide primer on steel surfacesof any description over 10 cm width or grith including preparation of new surface |
| 18 | M&L for cutting through existing bituminous road / hard standing making trench of minimum 100 mm width x 150 mm deep along cross section of road or laying of Gl pipe for encasing electric cable and then repairing. the road /hard standing to match with original finish all as specified and directed. |
| 19 | M&L for valve chamber of any size, type and construction of brick masonry valve chamber of size 0.60m x0.6m x 0.6m (internal dimension) with 15cm thick foundation using PCC 1:3:6 type C-2 (using 40nim graded stone aggregate) over 15cm thick hardcore, 23cm thick brick wall built in cement and sand mortar (1 :4), 15mm thick internal and external plaster including top of floor in cement and sand mortar 1:3 finished even and smooth, without using extra cement, 6mm thick MS sheet cover with, 50mm x 50mm x 6mm MS angle frame embeded in PCC 1:2:4 type 8-1 (using 20mm graded stone aggregate) coping having rectangular hinged opening of size with locking arrangements & handle made out of 25cm dia MS round bar, hold fasts etc applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surface including excavation and earth wotk in any type of soil and disposal of surplus soil to a distance n.exc 50m complete all as specified. |
| 20 | M&L for making connection by cutting existing GI /CI/DI tubing of size for alternations or additions or fixing of tee as specified and directed. |
| 21 | M&L for HDPE DWC Pipes for laying in trenches for cushioning of cable of sizes -40mmX 32mm all as directed and specified. |
| 22 | M&L for cutting into existing manholes for connecting new drains of 200mm dia ,making good to pipe and rendering ,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 30 daysAug 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 37 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender