Tender For General-Kerala Judicial Academy-Replacement Of Ct-Pt Unit-Urgent Requirement To Carry Out The Work Of Replacing The Existing Two Cts Of Class 0.2 S In The Ht Installation For Smart Metering As Directed By The Kseb.-Ht-Electrical-Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Jul 2026
5 days left
EMD
5218
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Kerala Judicial Academy-Replacement Of Ct-Pt Unit-Urgent Requirement To Carry Out The Work Of Replacing The Existing Two Cts Of Class 0.2 S In The Ht Installation For Smart Metering As Directed By The Kseb.-Ht-Electrical-Work
BOQ
| Sl. No. | Item Description |
| 1 | SITC of CT-PT unit |
| 2 | OD295403/2025-2026:Dismantling of existing outdoor type CT PT unit as required. |
| 3 | OD319841/2025-2026:Supply installation testing and commissioning of suitable size 3 Nos Current transformer Rating 15/5A, Accuracy class 0.2S, 10VA IL 12/28/75 kV as per IS 2705 and one Number PTs (, Rating 11kv/110 volt, Accuracy class 0.2, 20VA, IL 12/28/75 kV as per IS 2705(or suggested by KSEB) including giving necessary connections and Hole punching, bending, drilling etc as per the direction of Engineer In charge. |
| 4 | OD298448/2025-2026:Supply installation testing and commissioning of test terminal block. |
| 5 | OD299452/2025-2026:Dismantling of old DO fuse and installation of new polymeric DO fuse |
| 6 | OD298454/2025-2026:Supply installation testing and commissioning of 20A HRC Fuse Base with HRC Fuse link as required. |
| 7 | OD297010/2025-2026:LS provision forapproximate KSEB statutory fees.(Actual amount will be remittedon production of original documents) |
| 8 | OD296952/2025-2026:Conveyance of CT-PT unit to TMR,Angamaly Division and delivery of tested CT to site. (Excluding statutory fees) |
| 9 | 90.14.1.1:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame) |
| 10 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 11 | OD302868/2025-2026:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper control cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 12 core 2.5 sq mm with factory made clamp |
| 12 | OD303025/2025-2026:Supply and fixing of siemens type brass compression gland,earth clamps and aluminium tubular crimping cable lugs for XLPE insulatedarmoured Al conductor cable 1.1 grade and making end termination suitable for 2.5/12 core cables of the following sizes as required. |
| 13 | OD298549/2025-2026:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 4 sq. mm |
| 14 | 90.16.1.8:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required8.00 mm copper conductor (0 SWG) |
| 15 | 90.16.5.8:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.8 mm (0 SWG) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender