Tender For Provision For Construction Of Ugr, Positive Suction Pump House, Installation Of Pumping Machineries Including Laying Of Feeder Main And Distribution Main For Water Supply Arrangement To Obc And Minority Hostel At Gothapatana, Bhubaneswar.
Tender Value
1.29 Crore
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision For Construction Of Ugr, Positive Suction Pump House, Installation Of Pumping Machineries Including Laying Of Feeder Main And Distribution Main For Water Supply Arrangement To Obc And Minority Hostel At Gothapatana, Bhubaneswar.
BOQ
| Sl. No. | Item Description |
| 1 | Designing, construction, testing and commissioning of R.C.C 1.50 Lakh Ltr Capacity OGR/UGR including cost of all material, labour, T & P with taxes, transportation provision of all other accessories like suction pipe , delivery pipe,scour pipe , water level indicator , lighting arrestor/ ladder (inside& outside), M.H cover, over flow pipe, ventilator etc all complete as per the P.H specification and the direction of Engineer-in-charge. |
| 2 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 3 | Provision for levelling & dressing of proposed site for construction of OGR/UGR, Compound Wall & positive suction Pump House by using Dozer D-50 -A 15 including hire charges of macinaries etc complete. |
| 4 | Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 5 | Laying of 200mm dia DI W/S Pipe Line - |
| 6 | Cutting metalled road of grannualar course of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge. |
| 7 | Laying of 200mm dia DI W/S Pipe Line - |
| 8 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 9 | Dismantling and removing Paver tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead |
| 10 | Earth work of excavation in Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge. |
| 11 | 1st depth up to 1.50 mtr lift |
| 12 | 2nd depth from 1.50 mtr to 3.00 mtr lift |
| 13 | 3rd depth from 3.0 mtr to 4.50 mtr lift |
| 14 | Earth work of excavationof founation in laterite rock or any hard rock (other than granite or disintigrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.5m in depth and depositing the soil within initial lead of 50m and as per specification approved by the Department. |
| 15 | 1st depth up to 1.50 mtr lift |
| 16 | 2nd depth from 1.50 mtr to 3.00 mtr lift |
| 17 | 3rd depth from 3.0 mtr to 4.50 mtr lift |
| 18 | Supplying all materials, labour and T&P for Laying in trenches centrifugally Cast (Spun) K - 9 & K-7 Class Ductile Iron socket and spigot pipe with internal cement mortar lining and external bituminous coating confirming to IS: 8329-2000 of the following nominal diameter as per specification and direction of Engineer-in-charge including cost of pipe carriage of pipes from store to worksite, supplying of all labour, material, tools & plants required to perform the work (Earthwork in trenches, jointing of pipes, specials & fittings to be measured and paid for separately) |
| 19 | 200 mm dia D.I.K-9 pipe |
| 20 | 100 mm dia D.I.K-7 pipe |
| 21 | Supplying all materials, labour and T&P for Providing Push-on-joints confirming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadiene Rubber (S.B.R) quality , testing of joints, etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work.(excluding cost of rubber which will be supplied alongwith pipe) |
| 22 | 200 mm dia |
| 23 | 100 mm dia |
| 24 | Supplying all materials, labour and T&P for Providing flanged joints conforming to IS:3114 to FLANGED Cast Iron pipes and fittings of the following nominal diameter including testing of joints, cost of bolts nuts and rubber insertion, etc all complete as per specification and direction of Engineer In-Charge including supplying of all labour, material, tools & plants required to perform the work. |
| 25 | 200 mm dia |
| 26 | 100 mm dia |
| 27 | Providing and fixing of CI mechanical joint socket conforming to IS 13382/92 to flanged ends of CI / DI Pipes including supply of all material, labour tools & plants and testing of joints, etc. all complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work |
| 28 | 200 mm dia |
| 29 | 100 mm dia |
| 30 | Supplying all materials, labour and T&P for Providing, laying, fixing & testing of D.I / C.I Specials, Bends, etc in trenches confirming to IS: 1538 all complete as per specification and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work. |
| 31 | Supplying all materials Labour & T & P for Fixing Ductile Iron Resilient Seated Glandless Sluice Valve Sluice Valve / NR Valve PN-1.6 with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Sluice valve .(VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority) |
| 32 | 200 mm dia D.I.D/F Gland less Sluice valve |
| 33 | 100 mm dia D.I.D/F Gland less Sluice valve |
| 34 | 100 mm dia D.I.D/F Non Return Valve |
| 35 | 100 mm dia brass PRV |
| 36 | 50 mm dia brass PRV |
| 37 | 25 mm dia brass PRV |
| 38 | Supplying all materials Labour & T & P for Fixing Gear Operated ButterFly valve with double flanged ends for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of valve .(VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority) |
| 39 | 300mm dia D/F Gear Operated Butter Fly Valve(PN-1.6) |
| 40 | Supply fitting & fixing ,testing & commissioning of electric powered electromagnetic full bore type IP 68 Fully welded Flanged type water flow meter of Pulse DC type of Flow tube SS304,coilhousing & electrodes SS316,SS RING TYPE grounding etc with IP 68 signal coverter remote mounting,input power supply 24V DC 4 - 20 mA,programable LCD display to show Actual flow rate,totalised flow, flow direction, flow velocity,conductivity with + or - 0.5% accuracy etc & provision to diagnostics empty pipe detection, coil tempreture, coil resitance etc & comptable to data communication modules with masibus & communicaton the data to remote SCADA station for live monitoning where ever required including providing data cable & power cable required as per site condition. The standard callbratation certificate & guaantee certificate for flow meter & electromagnetic signal coverter to be given for minumum one year from the date of installation. The Approved Make:(KROHNE MARSHALL/E&H/ABB/SIEMENS/Equivalent make with approval of authority) including cost material with all taxes transportation to Site/Storage with insurance. |
| 41 | 200mm dia Flow meter |
| 42 | Supply, Installation, Testing Wiring & Commissioning of IP 66 rated Metal outdoor Flowmeter display panel including Supply of All materials 16A DP RCBO 30ma-1nos,6A DP MCB-1nos,2A SP MCB-2nos,24Vdc 6Amp Power supply unit-1Each,10A DP MCB-1nos,IP-66 Metal Encloser(600x500x200)-1nos,Internal wiring with cu. Wire and lugs -1set,Angle stand 1500x500 mm-30kg T&P and Labour Etc. All completed as per electrical specification and as per direction of EIC. |
| 43 | Supplying, Fitting,fixing ,testing & commissioning of double chamber control valve,hydraulic operated with battery powered, selonoid valve,electronic timer controller,Timer,integral oriface plate assembly,differential control,reverse flow control,restriction orifice Fitting,Commissionings,valve position indicator,USB Port withj cable ,liscensed software,IP68,with builtin power supply for 2 years operations for operating pressure 0.10-2.0 Kg/cm2 Body A216 WCB integrated with PLC pannel for operation (local/remort and web enabled with command and control ) of (make VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority) to control water supply including the cost of valve cutting the pipeline & making good to the damages including cost of all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 44 | 200mm dia. Selonid valve pilot Actuated |
| 45 | Supply of Level indicator to be installed at UGR and ESR with following Specification Range= 0 to 8 mtr Type =Radar Power Supply=24V DC Out Put=4-20mA (Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority) |
| 46 | Supply of Pressure transmeter to be installed at 100/150/200 mm dia delivery main with following technical specification i,e.Range up to 5 kg/cm2,Type-Sensor,Power Supply-24 DC,Out put-4 to 20mA,(Make-E & H/ABB/VEGA/WIKA/Equivalent make with approval of authority) |
| 47 | Suppply of IP 65 Junction Box made of high quality Thermoplastic Polystyrene / polycarbonate Dust & jet water proof, Chemical , Acid , Corrosion , Impact , Insulated & Shock Proof with internally embedded gasket (PUR), fire retardant, having high impact,made of halogen & silica free recyclablematerial, UV resistant, having high grade gasket made of EVA, should withstand glow wire test at 7500c/9600c, should beflame retardant in accordance with IEC 60695. JB Size-155 x 210 x 92Mounting type- Wall mounting .(PT Box) |
| 48 | Supply,Installation and commissioning of single phase 1KVA on line UPS in pure sine wave with dry shell battery for 2hrs. Backup, rack and should be maintenance free battery including cables power plug,switch etc.as per specification.including cost of all labour,material,transportation to site,T & P etc. all complete as per direction of Engineer in charge. |
| 49 | Supply fitting & fixing of G.I Perforated Cable Tray of size 50mm x 50mm x 50mm and mounting brackets .(1.2mm) |
| 50 | Supplying & laying of 2.5 Sqmm 7 core Copper Armoured Control Cable (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 51 | Flow meter & Control Valve |
| 52 | Supplying & laying of 2.5 Sqmm 2 pair Copper Armoured PVC Outer Sheathed Instrumentation cable (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 53 | Pressure Transmeter |
| 54 | CABLE TRENCH: Excavation in unpaved areas of earth work at sites for conventional cable trenches for a depth upto 0.9 metres or bellow to the water Pipeline including backfilling the trench, job complete in all respects, including all labour and materials complete as per specification and directions of Site Engineer /Engineer-in-Charge. |
| 55 | HDPE PIPE: Supply and Laying of following HDPE pipe in cable trench as per specification and directions of Site Engineer / Engineer-in-Charge. |
| 56 | 50mm dia HDPE Pipe - For Laying of power supply cable from Transformer to Panel Board |
| 57 | 40mm dia HDPE Pipe - For Laying of Control & Instrumentation Cable |
| 58 | 25mm dia HDPE Pipe - For Laying of power supply cable for Yard Lights |
| 59 | Provision for Configuration of Electro Mechanical Instrument to PLC with data acquisition at required interval including monitoring and command control from PLC & HMI/SCADA. |
| 60 | Flow Meter , Pressure Transmeter & Control Valve |
| 61 | Supplying all materials, labour and T&P for Providing and laying M.S. pipes of all classes conforming to IS:3589 & IS:3601 & MS Specials of the following outer diameter and outside painting etc. all complete as per specification and direction of Engineer In - Charge including supplying of all labour, material, tools & plants required to perform the work. (Earthwork in trenches, jointing of pipe to be measured separately) . |
| 62 | 323.9 mm outside dia MS Pipe (10.5 mm thick)-1.5 Lakh OGR/UGR to Positive Pump House Suction Line |
| 63 | 300X300X300mm dia MS Plain Tee -Common Suction Line of Pump Set - |
| 64 | 300mm dia 90' MS Plain Bend -Common Suction Line of Pump Set inside OGR/UGR - |
| 65 | 300mm dia MS Flange 12mm thick -Common Suction Line of Pump Set inside OGR/UGR- |
| 66 | 300mm dia MS Blank Flange 16mm thick -Positive PH Suction Line - |
| 67 | 300X100X300mm dia MS Plain Tee -For Suction arrangement of indivisual Pump Set - |
| 68 | 114.30 mm outside dia MS Pipe (6.30 mm thick)-Common delivery Line of Pumping Unit - |
| 69 | 100mm dia MS Flange 10mm thick - |
| 70 | 100mm dia MS 90' Plain Bend -Pumping unit Delivery Line - |
| 71 | 100X50X100mm dia MS Plain Tee For connection with distribution main & loading line of Roof Top Tank |
| 72 | 200X200X200mm dia MS Plain Tee -For connection with Rising main of ROTI with rising main of OBC & Minority Hostel Feeder Main. |
| 73 | 219.1 mm outside dia MS Pipe (6.30 mm thick)-For fixing of EM flow meter , Control Valve & Valve on loading line - |
| 74 | 200mm dia MS 45' Plain Bend -For fixing of EM flow meter , Control Valve & Valve on loading line - |
| 75 | 200mm dia MS 90' Plain Bend -For Feeder Line of OGR/UGR |
| 76 | 200mm dia MS Flange 12mm thick -For fixing of EM flow meter , Control Valve & Valve on loading line - |
| 77 | 100mm dia NB SS 304 Bellow with MS Flange Zinc coated on both ends length 300mm with flange PCD 241mm.-For delivery line line of pumping unit |
| 78 | Supplying all materials, labour and T&P for Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labour, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge. |
| 79 | Supplying all materials, labour and T&P for Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints all complete as per specification and direction of Engineer-in-Charge. |
| 80 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete |
| 81 | Supply installation testing & commissioning of Single Phase wide Voltage Range Horizontal openwell Submersible Pump set along with suitable size of flat copper cable of 3.0 mtr length suitable for disposal of leakage water from pump house. |
| 82 | Dewatering Pump of Positive Suction Pump House |
| 83 | Providing and fixing to wall, ceiling and floor / in treanches of PVC ASTM (Sch-80) pipe& fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. |
| 84 | 50mm dia uPVC Pipe (Sch-80) Trenches -For loading line of roof Top Tank of Hostel Building - |
| 85 | 50mm dia uPVC Pipe (Sch-80) Wall & Ceiling -For loading line of roof Top Tank of Hostel Building - |
| 86 | 25mm dia uPVC Pipe (Sch-80) Trenches -For loading line of roof Top Tank of Hostel Building - |
| 87 | 25 mm PVC Ball Valve with solvent welded Metal Ball -For loading line of roof Top Tank of Hostel Building - |
| 88 | 50 mm PVC Ball Valve with solvent welded Metal Ball -For loading line of roof Top Tank of Hostel Building |
| 89 | Supplying all labour T&P materials for fitting & Fxing of pressure meter (Gauge) 0 to 8/10 kg Non comtact dipharma type with snubber, piping & needle valve on pipe line as well as diferent lane & sub-lane to know the water pressure including the cost of pressre meter with drilling holes in pipe line & making good to the damages at including cost all labours T&P etc all complete as per the direction of Engieer-in-charges. 0 to 68/10kg/sqm pressure meter. |
| 90 | Rising main, distribution & pumping main line |
| 91 | Supplying all materials labour & T & P for making hole in the DI/MS pipe & welding of MS/ GI socket including fixing of GI / SS short piece for fixing of Pressure transmeter in proper position etc complete. |
| 92 | Rising main, distribution & pumping main line |
| 93 | Supplying all materials, labour and T&P for Supply, Installation & Testing of DI Tamper proof Kinetic Air Valve conforming to IS 14845 for water works purposes for the following diameters including drilling the water main (Cast iron pipes with metal straps), all complete as per specification and direction of Engineer-in-Charge. (including cost of nut bolt washer, rubber insertion sheet, etc.).(VAG/ Talis/ AVK/IVC/ Kirloskar/Hawle/Equivalent make with approval of the authority) |
| 94 | 50mm dia single Tamper proof air valve with metal strap for pipe |
| 95 | 25mm dia single Tamper proof air valve with metal strap for pipe |
| 96 | Supplying all labour, T&P materials etc. and the construction of brick masonry sluice valve chamber of over all of following internal sizes ; earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:4:8) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete including precast Factory made Heavy duty RCC cover slab with Frame ( SD-20) made out of M30 concrete to with stand against 20 MT vehicular load as per the approved drawing if any and the direction of Engineer-in-charge. |
| 97 | S.V/FM.chamber internal size [0.90x0.90x1.20mtr] -For 200mm dia Sluice Valve of feeder Line - |
| 98 | Sluice valve chamber [0.75x0.75x1.225mtr] |
| 99 | Ball valve & PRV chamber [0.45x0.45x0.70mtr] |
| 100 | Supplying all labour, T&P materials etc. and the construction of brick masonry valve chamber of over all of following internal sizes ; earth work in excavation in all kinds of soil; laying of 150mm thick CC (1:4:8) with crusher broken hard granite metal up to 4 cm size metal; 250mm thick brick masonry workin C.M (1:4) with fly ash bricks having crushing strength betgween 75 Kg/cmsq. 12mm thick cement plastering with CM(1:3) with punning for inside surfaces & out side plastering above GL & cement pointing below GL etc. all complete excluding cover slab . |
| 101 | Internal Size - 3.30m x 1.20m x 1.50 m -For Flow Meter & Control Valve chamber on Feeder main - |
| 102 | Supplying all materials Labour & T & P for providing & fixing of 60mm thick Medium duty precast Factory made RCC Cover slab .The cover slab & frame should be enough strength to withstand against light vehicular movement up to 10 MT load of following size of chambers including cost of cover slab etc complete as per actual site condition & direction of Engineer in charge. |
| 103 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work site, payment of royalty , taxes& labour cess etc all complete as per specification and direction of Engineer-in-charge. |
| 104 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour ,materials with all taxes, lead ,T & P etc all complete . |
| 105 | Supplying all labour , T&P and removing surplus earth /debrise by mechanical means within 10 K.M radious etc all complete as per the direction of EIC. |
| 106 | Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 107 | R.C.C work in ground floor of M-30 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead ,T & P etc all complete . |
| 108 | Beyond 1.5 mtr up to 4.50 mtr depth -Positive Suction pump house raft base ( at 3.10 mtr below GL) |
| 109 | Up to 1.5 mtr depth & Ground Floor -RCC walls ( 2nd lift) above raft from 1.60 mtr to GL |
| 110 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 111 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. |
| 112 | R.C.C. Foundation, Plinth Band, Footings, Column Base, Mass Concrete & Precast Slabs |
| 113 | Below 1.50 mtr depth -RCC Raft of Positive Suction Pump House |
| 114 | With in 1.50 mtr depth |
| 115 | R.C.C. Beams, Column, Grider and Bressmer |
| 116 | Below 1.50 mtr depth |
| 117 | With in 1.50 mtr depth |
| 118 | R.C.C. Lintels -Positive Suction Pump House |
| 119 | R.C.C. Walls and Fins |
| 120 | Below 1.50 mtr depth |
| 121 | With in 1.50 mtr depth |
| 122 | Floor & Roof Slabs, Landings, Balconies, Projecting, Sun Shades and Chajja |
| 123 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in Foundation & Plinth |
| 124 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:6) brick masonary in Superstructure. |
| 125 | 2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips including cost of Materials labour etc complete in all respect. |
| 126 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) brick masonary in foundation & plinth. |
| 127 | Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentin cement mortar (1:4) brick masonary in Superstructure. |
| 128 | Supplying all materials, labour T & P for providing C.C. (1:2:4) with 12mm. Size C.B.H.G. chips, in flooring including hoisting and laying etc. all complete as per specification and direction of Engineer-in-charge. |
| 129 | Providing Supplying, fitting and fixing of 60mm thick interlock concrete colour paver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cutting corbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge. |
| 130 | Including Cost of Paver Tile |
| 131 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:4) over brick work /RCC work including curing scafolding etc. complete. |
| 132 | Supplying all materials labour & T & P for 12mm. thick cement plaster in cement mortar (1:6) over brick work including curing scafolding etc. complete. |
| 133 | Supplying all materials labour & T & P for 16mm. thick cement plaster in cement mortar (1:6) over brick work including curing scafolding etc. complete. |
| 134 | Providing , fitting & fixing up UPVC ( Unplasticized Poly vinyle Chloride ) casement window (sliding type) with top fixed -60 series duly manuforced using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frames, 75mmx60mmx2.25mm for casement window sash profile & 74mmx60mmx2.5mm mulion profile capable of mounting single glazing system strually reinforced with Hot deep galvanised upto 50 microns of minimum thick ness of 1.5 mm prefabricated & wedded through fusion welding the window sash shall be fitted with 6 mm toughened glass & saint-Gobain make duly fixed with EPDM weather seal clear including all cost conveyance labour T & P etc complete as per direction of Engineer in Charge. |
| 135 | Supplying all materials labour T&P for providing M.S. Grill/ Grill gate /Pipe as per following size as per specification.all complete. |
| 136 | Providing,fixing of 120 minutes of metal fire rated doors as per IS:3614 part -2:1992 for stability and integrity.Pressed Galvanised steel confirming to IS:277 specification .Door tested and approved ARAI (Automative Research association of India Pune) for maximum rating of 2 hrs .door frame shall be double rebate profile of size 139 x 57mm made out of 1.2mm minimum thick galvanised steel sheet depend on single and double leaf door. There should be bottom membrance in the frame for proper alignment .Provision should be kept for grouting with cement and sand slurry necessary for fire doors on the clear masonary opening .Door leaf should be 43mm thick fully flush double skin door .Door leaf shall be manufactured from 0.80mm thick galvanised sheet depends on sigle and double leaf door . The internal construction of the door should be rigit reinforcement pads for receiving appropriate hard ware.The infill material shall be resin bonded honeycomb core.All door shall be factory prepared for receiving appropriate hard ware and provided with necessary reinforcement for hinges etc. complete as per direction of Engineer in Charge. |
| 137 | Supplying all materials labour & T& P for making fabricated Stair case made out of MS Chanel, Angle, Flat, Chequered Plate in proper position & alignment including cutting & welding in proper shape & size with erection at site etc complete. |
| 138 | Supplying all materials, labour, T&P and fixing of Fixing KOTA Tile in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete polishing etc all complete. as per the direction of the Engineer in charge.16mm thick Kota |
| 139 | Finishing plastered surfaces of walls with Berger Synthetic putty (interior) & marking smooth to receive painting |
| 140 | Provision for Plastic emulsion painting two coats to walls with over a coat of primer of approved shade on plastered surface to give an even shade in all heights including cost, conveyance, taxes of all materials, cost of all labour, T&P safety belts, sundries etc. as required for the work complete . |
| 141 | Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete. |
| 142 | Supplying all labour, materials and tools and plants for enamel painting two coat over a coat of primer on MS doors/grills as per the approved shade and colour as per direction of Engineer in charge |
| 143 | Construction of Compound Wall - |
| 144 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 145 | Supplying all labour, T&P for excavation of pipe line trenches etc., other than granite or laterite rock, disintegrated rock removed by chiseling including dressing and leveling the bed not exceeding 1.5mtr depth and depositing the soil within 50mtr initial lead as per specification and direction of Engineer-in charge. |
| 146 | Supplying & filling with sand with watering & ramming including cost of materials with taxes, transportation, all labours, T&P etc. all complete as per the direction of Engineer-in-charge. |
| 147 | Cement concrete (1:3:6) using 40 mm. size hard granite crusher broken metal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge. |
| 148 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in foundation and plinth |
| 149 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:6) in Superstructure. |
| 150 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:3) in Superstructure. |
| 151 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantling then after casting including cost of materials all complete. |
| 152 | Column Footings - |
| 153 | Column & Beam - |
| 154 | Roof slab & Chajja - |
| 155 | Supplying of all materials, labour T&P for RCC (1:11/2:3) with 12mm size hard granite crusher broken chips for RCC work excluding centering ,shuttering with all cost, conveyance, royalty & taxes etc. all complete as per P.W.D. specification and direction of Engineer-in-charge. |
| 156 | Supplying of all materials, labour T&P for M.S reinforcement for RCC work including cutting, bending, binding, straightening & tying grills and placing in position including cost of binding wire 18 to 20 gauge, M.S. Rod/Tor steel with all cost, conveyance & taxes etc. all complete as per P.W.D. specification & direction of Engineer-in-charge. |
| 157 | 12mm thick cement plaster (1:6) for brickwork including cost of all labour ,materials with all taxes, lead ,T & P etc all complete inside plaster |
| 158 | 12 mm thick cement plaster (1:4) to Brick work/R CC surfaces finished smooth including closed deep chiping and slury treatment |
| 159 | Providing wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes& putty including cost, conveyance, royalities etc, all complete. |
| 160 | Supplying all materials, labour, T & P for refilling the trenches with excavated materials within 50m initial lead and 1.5m initial lift etc. all complete. |
| 161 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:3) in foundation and plinth |
| 162 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensional tolerance +2%. percentt in cement mortar (1:3) in Superstructure. |
| 163 | 12 mm thick cement plaster (1:4) to Brick work/R CC surfaces finished smooth including closed deep chiping and slury treatment |
| 164 | Supplying all materials labour and T& P for fitting and fixing of M.S Gate duly welded with square bar , angle, flats etc. complete as per specification . |
| 165 | Enamel Painting two coat with any approved synthetic enamel paint over a coat of primeron new iron work including cost of enamel paint etc all completeover a coat of primer .. |
| 166 | Supply, installation of chemical earthing with crystalline conducting material for Back Fill Compound & installation of Maintenance Free Earthing Electrode with ISI mark G.I. Pipe dia 50mm as Secondary electrode with wall thickness of 2.6mm and the primary earthing electrode will be 25mm x 6mm hot dipped galvanized strip filled with a highly conductive & non-corrosive compound in between the primary earthing & the secondary earthing. A solid G.I. Base plate of 300 x 300 mm seals the unit at the bottom. Ground filling compound will be provided in 25kg per bag - 2nos. Excavation of earth pit refilling, Precast RCC chamber with lid etc. all complete as per the site requirement. |
| 167 | Supply, Installation, Testing Wiring & Commissioning of Lighting Distribution Panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs. Having 63A 4P MCB-1 Nos,32A FP MCB-2 Nos, 32A DP MCB-1 Nos, 16A DP MCB- 3Nos, 10A DP MCB-1Nos, All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND/Equivalent make with approval of the authority. All completed as per electrical specification and as per direction of EIC. |
| 168 | Recessed/Surface main wiring along with earth wire with the followiing size of PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.60mm in surface/recessed PVC conduit as required. (Make of wire: Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority). |
| 169 | Recessed/Surface sub main wiring along with earth wire with the followiing size of PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.60mm in surface/recessed PVC conduit as required. (Make of wire: Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority). |
| 170 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 171 | Light Points |
| 172 | 10A/20 A Plug Point |
| 173 | Fan Point |
| 174 | Supply ,fitting and fixing of the following fixtures on existing board / cover and connection as required. |
| 175 | a)Celing Rose - |
| 176 | Supply ,fitting and fixing of the following fixtures on existing board / cover and connection as required. |
| 177 | a) Angle Holder - |
| 178 | Supply and fixing of electronic Fan Regulators.(Mini) |
| 179 | Supply fitting fixing of 1200mm Ceiling fan (Havells/ Bajaj/Usha/ Equivalent make with approval of the authority) |
| 180 | Supply fitting fixing of Heavy Duty Single Phase 1400 rpm Exhaust Fan 450mm (Havells/ Bajaj/Usha/ Equivalent make with approval of the authority) |
| 181 | Supply and fixing of LED Tube Light 20watt. |
| 182 | Supply, fitting & fixing of Board with cover 18Modular. |
| 183 | Supply, fitting & fixing of Board with cover 12Modular. |
| 184 | Supply, fitting & fixing of 10A 1way Switch. |
| 185 | Supply, fitting & fixing of 6A 3 pinSocket. |
| 186 | Supply, fitting & fixing of Board with cover 3Modular. |
| 187 | Supply, fitting & fixing of 20A 1way Switch. |
| 188 | Supply, fitting & fixing of 16A Socket. |
| 189 | Supply and fixing of 48 watt LED street light with bend pipe, clamp etc. |
| 190 | Installation, testing and commissioning of PLC Compartable 7.5HP VFD Panel - 2 nos. |
| 191 | Supply ,Fitting & Fixing of BCH Make Double Door Enclouser System Size 1000 x1400x400mm |
| 192 | Supply ,Fitting & Fixing of 7.5KW VFD (Make :Make-ABB/Siemens/CG/Schnider/Lauritz Knudsen/Equivalent make with approval of the authority) |
| 193 | Supply ,Fitting & Fixing of Multi functional Meter |
| 194 | Supply ,Fitting & Fixing of MCB TP 16A |
| 195 | Supply ,Fitting & Fixing of ADON BLOCK 2 NO +2NC L&T |
| 196 | Supply ,Fitting & Fixing of 6A SP MCB 10KA |
| 197 | Supply ,Fitting & Fixing of COOLING FAN |
| 198 | Supply ,Fitting & Fixing of 100/5 CT |
| 199 | Supply ,Fitting & Fixing of ON OFF TRIP INDICATOR |
| 200 | Supply ,Fitting & Fixing of START/STOP/RESET PUSH BUTTON WITH NO & NC |
| 201 | Supply ,Fitting & Fixing of AUTO/MANUAL SWITCH 2WAY 2POLE |
| 202 | Supply ,Fitting & Fixing of CONTROL TBS |
| 203 | Supply ,Fitting & Fixing of POWER TBS |
| 204 | Supply Laying of 2.5sqmm Flexible Cupper Wire Single Core. |
| 205 | Supply Laying of 10.0sqmm Flexible Copper Wire Single Core. |
| 206 | Supply Laying of 100A Changeover Switch Make |
| 207 | Installation, testing and commissioning of Power Distribution Panel |
| 208 | Supply ,Fitting & Fixing of 100AMP 36KA DZ1 MODEL 4 POLE MCCB |
| 209 | Supply ,Fitting & Fixing of EXTENDED ROM DZ1 |
| 210 | Supply ,Fitting & Fixing of SPREADER LINK DZ1 |
| 211 | Supply ,Fitting & Fixing of 100A Four Way Copper Bus Bar. |
| 212 | Supply ,Fitting & Fixing of MCB TP 32A |
| 213 | Supply ,Fitting & Fixing of MCB DP 20A |
| 214 | Installation, testing and commissioning of 7.5HP Pump Set. |
| 215 | Supplying all labour, materials and tools and plants for installation , testing and commissioning of Mono Block pump set 5.5kW/7.5HP of Crompton/KBL/WIPL/ Wilo (M&P)/Grundfos/Equivalent make with approval of the authority with wide range Pump rated discharge 440LPM to 750 LPM, Pump rated Head- 42 to 21 mtr with Mechanical Seal with Pump material of construction, Casing- Cast iron, Impeller-CI, , Shaft - Carbon Steel,Shaft sleeves -Carbon Steel, RPM 2900/2 pole , Motor Characteristics 415+- 10%, IP55, IE3 efficiency class insulation class F/B , Ambient temp 50' C, Standard Direction of Rotation. Counter Clockwise from driving end.confirming to IS/IEC ,with acessories Base frame, etc all complete as per direction of Engineer in charge. |
| 216 | Supplying & laying of 35 Sqmm 31/2 core Aluminium Armoured Cable extrueded PVC Type ST2 sheathed, 650 /1100V grade as per IS 7098 (Part-1) 1988.(Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 217 | Supplying & laying of 10 Sqmm 3 core Stranded copper conductor, XLPE insulated, Cores laid up PVC tape/PVC Extruded Innersheathed for Multicore Cables, Unarmiured, Extruded PVC Type ST2 Sheathed, 650/1100 V grade as per is 7098 (Part-1) 1988. (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 218 | From VFD Panel to Pump Set |
| 219 | Supplying & laying of 6 Sqmm 3 core Aluminium Unarmoured cable extrueded PVC Type ST2 sheathed, 650 /1100V grade as per IS 7098 (Part-1) 1988. (Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 220 | Yard lighting arrangements |
| 221 | Supplying & laying of 6 Sqmm single Core HRFR PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volt Conforming to IS 694.(Make:-Finolex/Lauritz Knudsen /Anchor/ Havells /V Guard/Equivalent make with approval of the authority) |
| 222 | For earthing arrangement of different electro mechanical equipment & pumping mechinaries . |
| 223 | Supply of Hot dip Pole for mounting and installation of the street light of 6 mtr long with bracket as per specification and direction of Engineer in charge. |
| 224 | Supply all labour, T&P, materials for Installation of LED Street Light with concrete foundation as per direction of Engineer in charge. |
| 225 | Supply fitting & fixing of energy saving & envoirnmental friendly long life pressure die cast housing with toughened glass & with option of secondary optic with IP66 protection 45 Wt LED light . |
| 226 | Supply and fixing of 2.5 Sq.mm x 3 Core Pvc Insulated & Pvc Sheathed Copper Conductor Industrial Cable 1100 V. |
| 227 | Supplying all materials, labour and T&P fitting and fixing of unmaned control device of 3 Module 24hour Program, Programmable every 15 min, backup of 100 hours current capacity 32Amps. with necessary internal wiring using copper cable,clipping ,socketing and enable to ON/OFF the Exhaust Fans -4 nos. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender