Housing Urban and Rular Development Local Bodies Closing in 2 days TDR #56327612

Tender For Work For Balance Work For Repair Of Store Room, Washroom And Green House In Hsvp Nursery Sector-2 At U/E Rohtak. A/C Rs.1.93 Lacs E/M Rs.3860/- T/Limit : 01 Month

Issued by Local Bodies · Rohtak, Haryana
Tender Value
1.92 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
2 days left
EMD
3860
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rohtak → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Work For Balance Work For Repair Of Store Room, Washroom And Green House In Hsvp Nursery Sector-2 At U/E Rohtak. A/C Rs.1.93 Lacs E/M Rs.3860/- T/Limit : 01 Month

BOQ

Name of Work:- Work for balance work for repair of store room, washroom and green house in HSVP Nursery Sector-2 at U/E Rohtak. A/c Rs.1.93 Lacs E/m Rs.3860/- T/Limit : 01 Month
Sl. No. Item Description
19.57.2 RAIN WATER SPOUTS AND PIPES Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.2 110 mm diameter
213.6.1 STEEL DOOR/ WINDOW FRAMES AND SHUTTERS Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer1 Using M.S. angels 40x40x6 mm for diagonal braces
313.21.2 PRE-PAINTED / POWDER COATED GALVANISED SHEET DOOR/WINDOW FRAMES AND WINDOW SHUTTERS Supply and fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm and Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets and screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1:2:4 for fixing lugs complete in all respects as per drawing, design, specification and entire satisfaction of Engineer-incharge.2 Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter
411.68.3 INTERIOR FINISHING Applying priming coat:3 With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.
511.78 INTERIOR FINISHING Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade.
611.95.1 EXTERIOR FINISHING WALL AND ROOF SURFACES Finishing walls with Acrylic Smooth exterior paint of required shade :1 New work (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
723.4.1.2 COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS)1.2 Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group B.
823.4.4.2 COPPER WIRING WITH MODULAR SWITCHES IN PVC CONDUIT (SURFACE/RECESS)4.2 Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group B.
926.58.3 Supply and installation of garden bench3 Cast Iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. Seat and back shall be made of 10 strips of M.S. pipes 63 mm x 25 mm of 14 gauge with one M.S. Flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. Spray painted with approved brand paint. Fixed by grouting with 1:2:4 cement concrete (Minimum weight of each bench 105 kg). All materials required to be as per BIS specifications.
1026.76 Providing and fixing pair of Plastic dustbins 100 litre volume each, of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete.
112 B0296 UPVC bend 87.5° 110 mm bend
12Job Work PVC Water Tanker 500 LTR.
13Job Work PLD SHADY GREEN NET
14Job Work New shady green net. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56327612
AUTHORITY Local Bodies
TENDER VALUE 1.92 Lakhs
LAST DATE 13-07-2026
Authority
Authority Name Haryana Urban Development Authority
Work Description Tender for Work For Balance Work For Repair Of Store Room, Washroom And Green House In Hsvp Nursery Sector-2 At U/E Rohtak. A/C Rs.1.93 Lacs E/M Rs.3860/- T/Limit : 01 Month
Basic Detail
Tender No 2026C7C01744 7955 45E9 89A4 7E1B2FCAB683265HSV
Bidding Type Tender
Location
City Rohtak
State Haryana
Key Dates
Publish Date 06 Jul 2026
Submission Date 13 Jul 2026
Open Date 14 Jul 2026
Finance
Tender Value 1.92 Lakhs
Tender Fee 250
EMD 3860
Exemption Available
Document List
9a08ec0e-13d3-44cc-92f8-913374cc3b73.html
AD0167521.pdf
BOQ_612935.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Jul 14, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

9a08ec0e-13d3-44cc-92f8-913374cc3b73.html

pdf

AD0167521.pdf

xls

BOQ_612935.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders