Tender For Construction Of A Building At Primary School Bati, Located In Bati Village Under Pratappur Gram Panchayat In Jamua Block.
Tender Value
27.11 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
4 days left
EMD
54300
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Giridih → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of A Building At Primary School Bati, Located In Bati Village Under Pratappur Gram Panchayat In Jamua Block.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 2 | Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 3 | Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 4 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A)and disposal of excavated earth as obtained to a distance up to 50mts. Including all lift,levelling,ramming the foundation trenches, removing root of treese, shrubs all complete as per approved design, building specification and direction of E/I. |
| 5 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A)and disposal of excavated earth as obtained to a distance up to 50mts. Including all lift,levelling,ramming the foundation trenches, removing root of treese, shrubs all complete as per approved design, building specification and direction of E/I. |
| 6 | Providing coarse clean Sand filling in foundat. ion trenches or in plinth including ramming and waterind in layers not exceeding 150mm. Thick with all leads including cost of materials, labour, royalty and taxes all complete as per building specification and direction of E/I |
| 7 | Providing designation 75 B Brick flat soling joints with local sand including cost of water- ing taxes and royalty all complete as per building specification and direection of E/I |
| 8 | Providing P.C.C (M-150) (1:2:4) in foundation with approved quality of stone Metal of grade !!! (53mm.to 22.4mm.Size) clean coarse sand of F.M. 2.5 to 3.00 exculuding screening ,shuttering, mixing cement concrete in mixer and placing in position vibrating, striking, curing ,taxes and royalty all complete as per building specification and direction of E/I |
| 9 | Providing R.C.C. (M-200) (1:1.5:3) in Column with approved quality of stone Chips (20mm.to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 exculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking, curing,(but excluding the cost of reinforcement) taxes and royalty all complete as per buildingspecification and direction of E/I(Grade-A) |
| 10 | Providing R.C.C. (M-200) (1:1.5:3) in Tie beams of & all types Beam, with approved quality of stone Chips (20mm.to 6mm.Size) graded andclean coarse sand of F.M. 2.5 to 3.00 exculuding screening,shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of reinforcement) taxes and royalty all comp.as per building specification and directionof E/I. |
| 11 | Providing designation 75 B Brick work in C.M.(1:6) in foundation and plinth with appro-ved quality of clean coarse sand of F.M. 2.00 to 2.5 including 10 mm thick mortar joints, cost of screening,scaffplding, raking out joints to 15 mm. depth, curing, taxes and royalty all complete as per building specification and direection of E/I(Grade-A) |
| 12 | Providing 250mm thick brick jali work in C.M. (1:8) in superstructure with designation 75A brick and approved quality of clean coarse sand of F.M. 2 to 2.5, finished with deep ruled pointing in C.M. (1:3) with sand of F.M. 1.5 on entire surface including the cost of finished the holes, screening carriage of materials, scaffolding, raking out joints to 15 mm depth, curing taxes and royalty all complete, as per approveddesign, building specification and direction of E/I. |
| 13 | Providing 50mm. thik Damp Proof Coarse with cement concrete (M-150) (1:2:4) with approved quality of stone Chips (20mm.to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer with 5% cico or any other approved water proofing compound and placing in position striking,curing,taxes and royalty allcomplete as per bldg.specification and direction of E/I.(Grade-A) |
| 14 | Providing designation 75B Brick work in C.M.(1:6) in Super Structure with approved quality of clean coarse sand of F.M.2.00 to 2.5 including 10 mm thick mortar joints,cost of screening,scaffplding, raking out joints to 15 mm. depth, curing, taxes and royalty all compl-ete as per building specification and direection of E/I(Grade-A) |
| 15 | Providing R.C.C. (M-200) (1:1.5:3) in Lintel & band with approved quality of stone Chips (20 mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 exculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 16 | Providing R.C.C. (M-200) (1:2:4) in Lintel & band with approved quality of stone Chips (20 mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 exculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 17 | Providing R.C.C. (M-200) (1:1.5:3) in Chajja with approved quality of stone Chips (20mm.to 6mm. Size) graded and clean coarse sand of F.M. 2.5 to 3.00 exculuding screening,shuttering ,mixing cement concrete in mixer and placing in posit ion vibrating, striking, curing,(but exclud ing the cost of reinforce ment taxes and royalty all com plete as per building specification and direction of E/I. |
| 18 | Providing R.C.C. (M-200) (1:1.5:3) in Beams of all types, with approved quality of stone Chips (20mm.to 6mm.Size) graded andclean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cementconcrete in mixer and placing in position vibrating, striking,curing,(but excluding the cost of reinforcement) taxes and royalty all comp.as per building specification and directionof E/I. |
| 19 | Providing R.C.C. (M-200) (1:1.5:3) in Solid Roof Slab with approved quality of stone Chips (20mm. to 6mm.Size) graded and clean coarse sand of F.M. 2.5 to 3.00 inculuding screening, shuttering,mixing cement concrete in mixer and placing in position vibrating, striking,curing, (but excluding the cost of rein forcement) taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Centering and Shuttering incluiding strutting, propping etc. and removal of form for foundation, footing, bases of column, roofs, landing, lintels, beams, plinth beams, columns, chajjas etc. |
| 21 | Centering and Shuttering incluiding strutting, propping etc. and removal of form for foundation, footing, bases of column, roofs, landing, lintels, beams, plinth beams, columns, chajjas etcRoof |
| 22 | Centering and Shuttering incluiding strutting, propping etc. and removal of form for foundation, footing, bases of column, roofs, landing, lintels, beams, plinth beams, columns, chajjas etcTie beam |
| 23 | Centering and Shuttering incluiding strutting, propping etc. and removal of form for foundation, footing, bases of column, roofs, landing, lintels, beams, plinth beams, columns, chajjas etcColumn |
| 24 | Centering and Shuttering incluiding strutting, propping etc. and removal of form for foundation, footing, bases of column, roofs, landing, lintels, beams, plinth beams, columns, chajjas etcChajja |
| 25 | Providing and fixing fan hook of 16mm dia. M.S.bar and 1m long,bend to required size and shape, placed in position and fixed in R.C.C. Beam/Slab at the time of casting all complete as per specification and direction of E/I |
| 26 | Providing 19mm water proof cement Plaster in cm (1:3) in top of roof with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I |
| 27 | Providing 6mm cement Plaster in cm (1:4) in Ceiling with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/I |
| 28 | Providing 12mm cement plaster in cm (1:6) in both side wall with clean coarse sand of F.M. 1.5 including cost of screening, curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specifica- tion and direction of E/I |
| 29 | Providing 50 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 30 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 31 | Providing 12mm thick cement paster in cm (1:4) with clean coarse sand &1.5mm cement punning including curing, carriage of waterwith all leads and lifts as per building specification and direction of E/I. |
| 32 | Supplying fitting and fixing 20 gauge G.C.I. Sheet (Door & Window)gate on M.S.angle frame of size 60*60*6mm, including cost of fabrication providing necessary locking arrangements worth haskel and domny duly fixed in C.C. (1:2:4) blocks of required size, applying a prim ing red lead paint over steel work,taxes all com.as per specification and direction E/I. |
| 33 | Supplying fitting and fixing M.S. grill of 20*6 mm M.S.flats as per approved deesign and drowing ,properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction E/I. |
| 34 | Provding two coats of Snowcem of approbved shade and make over a coat of cement primer on new surface including preparing the plasterd surface smooth with sand paper, scffolding, curing and taxes all complete as per building specification and direction of E/I. |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 36 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over old surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l. |
| 37 | Provding two coats of synthetic enamel paint over a primer coat of red lead paint of approved shade and make over new steels surface including preparing the new steel surface after cleaning,removing dircet scales,smokes, grese and cleaning the surface taxes and royalty all complete as per building specification and direction of E/I(Mode of mea surement-Area shall be multiplied by the co-efficient as indicated in building specifications) |
| 38 | Supplying fitting and fixing C.A.R.W.D. Pipe 100mm dia with necessary strips,spikes,bands,shoesetc including cost of carriage all complete as per building specification and direction E/I. |
| 39 | Providing M.S.Steel reinforcement of 8 mm to 16mm Dia.M.S.bars as per approved deige and drawing including carriage of M.S.bars to work site cutting,bending and binding with annealed wire cost of wire,removal of rust, placing the rods in position all complete as per building specification and direction of E/I |
| 40 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I With \\"A\\" grade white 15X15cm Tiles. |
| 41 | Providing and laying hydraulically machine pressed terrazo tiles 20mm thick of approved texture with down marble chips of approved shade, size and quality, laid on 19mm. Thick bed of lime mortar (1:1:1:) (lime: surkhi :sand) with neat cement slurry mixed with pigment to match the shade of tiles between joints, including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing , royalty and taxes all complete as per building specification and direction of E/I. |
| 42 | Supplying tools and making connection of new GI distribution branch 15mm to 50mm dia with existing GI main by providing and fixing GI Tee including cutting of pipe at two place and threading theire ends, providing long screw and one GI Nipple all complete as per specification and direction of E/Ib) 20mm dia |
| 43 | Cutting chajja or cornice for laying GI pipe andrestoring the same with RCC(1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of E/I. |
| 44 | Cutting floor for laying GI pipe and restoring the same as per specification and direction of E/I |
| 45 | Providing and fixing brass/CI stop cock of approved quality all complete as per specifiction and direction of E/I |
| 46 | Provinding and fixing male ended 15mm dia brass bib cock of apporoved qual;ity with extra socket all complete as per specification and direction of E/I |
| 47 | Supplying, fitting and fixing viterious white glazed earthen ware IWC of parry Hindustan or any other ISS approved make with 100mm HCP 'P' trap 15liters CI pull and let go flushing cistern of names or other ISS equivalent make, complete with all fitting CI or CC bracket 32mm alkahene/ PVC teleiscope flush, pipe about 2M long with one brass coupling and clamps GI chain and pull including supplying and fixing a pair or viterous white glazed earthenware footreat to be fixed in floor 15mm CI body brass spindle stop cock of weight not less tha exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc all complete as per specification and direction of E/I. 580mm long - with 12.5 lit low level PVC cistern. |
| 48 | Supplying, fitting and fixing viterous white glazed earthenware wash hand basin of parry or Hindustan or any other ISS approved make supposed on pointed CI or RS brackets 32m CI brass waste 15mm dia body brass spindle stop cock of approved quality of weight not less tha 350gms , 32mm PVC waste pipe 750mm long with brass coupling at one end and making plumber joints etc all complete as per specifiaction and direction of E/I |
| 49 | Providing and laying 110mm dia PVC pipe for outlet of water to outlet drain including all accessoreies i.e slovent cem,ent, clamp ring socket etc |
| 50 | Supplying and fixing GI fitting of apprioved make all complete as per specification and direction of E/I.(A) ELBOW(i) 15mm dia |
| 51 | (ii) 20mm dia |
| 52 | (iii) 25mm dia |
| 53 | (B) TEE Plain(i) 15mm dia |
| 54 | (ii) 20mm dia |
| 55 | (iii) 25mm dia |
| 56 | (C ) REDUCING SOCKET(i) 20mm dia |
| 57 | (ii) 25mm dia |
| 58 | (D) NIPPLE(i) 15mm dia |
| 59 | (ii) 20mm dia |
| 60 | (iii) 25mm dia |
| 61 | (E )PLUG(i) 15mm dia |
| 62 | (ii) 20mm dia |
| 63 | (F) SOCKET PLAIN(i) 15mm dia |
| 64 | (ii) 20mm dia |
| 65 | (iii) 25mm dia |
| 66 | (G) UNION SOCKET (i) 15mm dia |
| 67 | (ii) 20mm dia |
| 68 | (iii) 25mm dia |
| 69 | (H) BEND WITH SOCKET(i) 15mm dia |
| 70 | (ii) 20mm dia |
| 71 | (iii) 25mm dia |
| 72 | (I) REDUCING TEE PLAIN(i) 20mm dia |
| 73 | (ii) 25mm dia |
| 74 | (iii) 32mm dia |
| 75 | (J)JAM NUTS(i) 15mm dia |
| 76 | (ii) 20mm dia |
| 77 | (iii) 25mm dia |
| 78 | Add Carriage Cost MaterialsBricks |
| 79 | Stone Chips |
| 80 | Cement |
| 81 | Steel |
| 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge20 mm nominal dia Pipes |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge25 mm nominal dia Pipes |
| 84 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not lessthan 93 gms |
| 85 | Providing and fixingh GM NRV horizontal/ vertical type of approved quality all complete as specification and direction of E/Ia) 15mm dia wt. not less then 150gm (Horizontal) |
| 86 | b) 20mm dia wt. not less then 150gm (Horizontal) |
| 87 | c) 25mm dia wt. not less then 150gm (Horizontal) |
| 88 | d) 15mm dia wt. not less then 150gm (Vertical) |
| 89 | e) 20mm dia wt. not less then 150gm (Vertical) |
| 90 | f) 25mm dia wt. not less then 150gm (Vertical) |
| 91 | Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 92 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 93 | 3 core PVC insulated, PVC sheathed copper conductior flat submersible cable, supplying, flat flexible submersible cable with copper conductor PVC insulated and PVC sheathed 3 core 4sq mm |
| 94 | Supplying and fittinbg submersible pump 150mm dia with bronze impeller up to 8 stage PM 1-2-1 capacity 1HP |
| 95 | Wiring for light/fan point/ exhaust fan point/ call bell point with 1.5sq. Mm FRPVC insulate copper conductor single core cable in surface / recessed conduit with paiono type switch phenolic laminated sheet suitable size M.S. box and eathing the point with 1.5 sq.mm FRPVC insulated copper conductor single core cable etc. as required Group-A |
| 96 | S/F following pianotype switch/socket on the existing switch box/cover including connection etc. as required |
| 97 | S/F PVC/GI boxes Supplying and fixing of the following sizes of PVC/GI box on surface recess with suitable size of phenolic laminated sheet cover in front incluiding painting etc. as required(b) 4\\"X7\\" |
| 98 | 3mm thick phelonic laminated sheet |
| 99 | Wiring for circuit submain wiring along with the earth wire with the following sizes of PVC insulated copper conductor single core cable in surface of recessed PVC conduit as required.2X2.5 sq.mm. + 1X2.5sq.mm. earth wire |
| 100 | 2X1.50 sq. mm + 1X1.50sq.mm earth wire |
| 101 | 2X6.00 sq. mm + 2X6.00sq.mm earth wire |
| 102 | S/F brass vatton/ Angle holder incuiding connection etc. as required |
| 103 | 20/22 watt LED tubelight |
| 104 | 15/16 watt LED bulb |
| 105 | Electronic step fan regulator |
| 106 | S/F 3 pin 5amp celling rose on the existing junction box wodden block including connection etc. as required |
| 107 | S/F the following way single pole and neutral sheet steel M.C.B. D.B. consumer unit 240V on surface by recess complete with tinnned copper busbar , neutral busbar earth plate dinbar hinged front acrylic cover from MCB knob detachable gland plate inter connection phosphatied and powder painted incluiding earthing etc. as reqired (Without MCB/RCCB/isolator) |
| 108 | Supply of 48\\" (1200mm) AC celling fan |
| 109 | I.T.C of celling fan incluiding wiring the down rods of standard length (upto 30cm) with 1.5 sq. mm. FRPVC insulated copper conductor single core cable etc. as required |
| 110 | Earthing with copper earth plate 600X600X3 mm thick (charcoal or coke and slat) |
| 111 | 32 amps TPN switch disconnector fuse unit I.S.I marked HRC fuses |
| 112 | Supplying all material labours and tools and equipment for driling 200x150 mm dia bore in any kinds of soil and rock by using DTH super rig machine and ball hammer technology inclusive of mobilization demobi dbilization of rigs air compressor all accessories air compressor all accessories tools and plant labour etc. all complete job including transportation charge.0.00m to 50.00m below G.L |
| 113 | 50.00 m to 145 m below G.L |
| 114 | Supplying assembling lowering and fixing in vertical portion in Borewell Unplasticized PVC medium well casing (CM) pipe of required dia do…………..do………. All completed job.150mm nom |
| 115 | Cleaning flushing and developing of drilled hole for testing the discharge of water development of bore well by continous flow of water by using heavy compressor upto satisfaction of E/I. to get uninterrupted flow of water free from sand and soil etc.2HRs operation |
| 116 | Supplying and fitting M.S or G.I cap having a hole to pass 32 mm dia Gi/PVC pipe over 200mm dia casing pipe as per direction of E/I for safety of drilled bore including provision of guard for safety of the same till returned final |
| 117 | supplying all labour tools and equipment for fixing 3 core 4sqmm copper cable as per specification and direction of E/I. (for connection from main line to pump or panel board or proposed HYDT) |
| 118 | Supplying Fitting and fixing 32mm dia CPVC Pipe, Column Pipe and Outlet Pipe Do………..do……….. All complete jobExposed on Wall |
| 119 | Goods & Service Tax (G.S.T.) - |
| 120 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender