Tender For Repairing And Maintainance Work Of Mr-5 Trenching Ground
Tender Value
2 Crore
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
15000
Bank guarantee accepted
Document Fee
15000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ujjain → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Maintainance Work Of Mr-5 Trenching Ground
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jul-2026 | Tender Value Corrigendum | Other | 21-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | PAINTING WITH 2D/ARTISTIC PAINT WORK WITH GOOD QUALITY PAINT AND DESIGN AS PER DIRECTION OF ENGINEER-IN-CHARGE |
| 2 | NORMAL WRITING WORK BASED ON SWACCHTA THEME AS PER DIRECTION OF ENGINEER-IN-CHARGE WITH PLASTIC PAINTS OF APPROVED BRAND LIKE ASIAN/ BERGER/ INDIGO OR EQUIVELENT. |
| 3 | PROVIDING AND FIXING HEAVY QUALITY DURABLE, UV-STABLIZED HDPE FABRIC GREEN LAWN NET FOR PROTECTING FROM DIRECT SUNLIGHT AS PER DIRECTION OF ENGINEER IN CHARGE |
| 4 | Demolishing cement concrete manually/by mechanical meansincluding disposal of material within 50 meters lead as per directionof Engineer-in-charge.1:3:6 or richer mix |
| 5 | Dismantling stone slab flooring laid in cement mortar includingstacking of serviceable material and disposal of unserviceablematerial within 50 meters lead. |
| 6 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceablematerial within 50 meters lead as per direction of Engineer-in charge. In cement mortar |
| 7 | Demolishing R.C.C. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within50 meters lead as per direction of Engineer-in-charge. |
| 8 | Boring, providing and installing bored cast-in-situ reinforced cementconcrete pile of specified diameter and length below the pile cap M35 in cement concrete, to carry a safe working load not less thanspecified, excluding the cost of steel reinforcement but including thecost of boring with, bentonite solution and temporary casing ofappropriate length for setting out and removal of same and thelength of the pile to be embedded in the pile cap etc. all complete,including removal of excavated earth with all lifts and leads (Lengthof pile for payment shall be measured upto bottom of pile cap).300 mm dia piles |
| 9 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing etc Mild steel and Medium Tensile steel bars. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.Cement concrete grade M-10 (Nominal Mix) with 40 mm maximumsize of stone aggregate |
| 11 | Centering and shuttering including strutting, propping stretching etc.complete for and removal of form work by sheet plate or ply woodshuttering for Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | Providing and laying in position specified grade of reinforcedcement concrete excluding the cost of centering, shuttering,finishing and reinforcement - All work up to plinth level :Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum sizeof stone aggregate. |
| 13 | Supplying and filling in plinth under floors including,watering, ramming consolidating and dressing complete.Moorum/Hard copra |
| 14 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine ith strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of stone dust sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-in-charge. |
| 15 | Steel work in built up M.S. tubular section (round, square orrectangular Hollow tube etc.) trusses/frame work etc./ railing work etc.including cutting, hoisting fixing in position and applying a priming coatof approved steel primer, welded and bolted including special shapedwashers etc. complete.Hot finished welded type tubes. |
| 16 | Supply & installation of precoated galvanised iron profile sheets(size, shape and pitch of corrugation as approved by Engineer-incharge) 0.50 mm ±5% total coated thickness (TCT) thick Zinccoating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches while transportation and should besupplied in single length upto 12 meter or as desired by Engineer-incharge. The sheet shall be fixed using self drilling/self tappingscrews of size (5.5x 55mm) with EPDM seal or with polymer coatedJ or L hooks, bolts and nuts 8mm diameter with bitumen and G.I.limpet washers or with G.I. limpet washers filled with white leadcomplete upto any pitch in horizontal/vertical or curved surfacesexcluding the cost of purlins, rafters and trusses and includingcutting to size and shape wherever required. |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.Cement concrete grade M-20 (Nominal Mix) with 20 mm maximumsize of stone aggregate |
| 18 | Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, class designation 50 (average compressive strength) insuperstructure above plinth level up to floor 2 level including the cost ofscaffolding : |
| 19 | 12 mm cement plaster of mix :1:6 (1 cement: 6 sand) |
| 20 | Welding by gas or electric plant including transportation of plant at siteetc. complete. |
| 21 | Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approvedsteel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works. |
| 22 | Providing & fixing UV stabilised fiberglass reinforced plasticsheet roofing up to any pitch including fixing with polymer coated'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washerscomplete but excluding the cost of purlins, rafters, trusses etc. Thesheets shall be manufactured out of 2400 TEX panel rovigsincorporating minimum 0.3% Ultra-violet stabiliser in resin systemunder approximately 2400 psi and hot cured. They shall be ofuniform pigmentation and thickness without air pockets and shallconform to IS 10192 and IS 12866.The sheets shall be opaque ortranslucent, clear or pigmented, textured or smooth as specified.2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down(2\\" or 3\\" or 6\\" ) as specified. |
| 23 | Providing & fixing UV stabilised fiberglass reinforced plasticsheet roofing up to any pitch including fixing with polymer coated'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washerscomplete but excluding the cost of purlins, rafters, trusses etc. Thesheets shall be manufactured out of 2400 TEX panel rovigsincorporating minimum 0.3% Ultra-violet stabiliser in resin systemunder approximately 2400 psi and hot cured. They shall be ofuniform pigmentation and thickness without air pockets and shallconform to IS 10192 and IS 12866.The sheets shall be opaque ortranslucent, clear or pigmented, textured or smooth as specified.2mm thick flat. |
| 24 | Providing and fixing G.I. chain link fabric fencing of required width andmesh size including strengthening with 2mm dia wire or nuts, boltsand washers as required complete with posts of specified materialand of standard design placed and embedded in cement concreteblocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stoneaggregate 40mm nominal size) every 15th post, last but one end postand corner post shall be strutted on both sides and end post on oneside only and struts embedded in cement concrete blocks70x45x50cm of the same mix, as per the direction of Engineer- incharge. (Cost of post, painting, earthwork and CC to be paidseparately) |
| 25 | Wall painting with plastic emulsion paint of approved brand andmanufacture to give an even shade:Two or more coats on new work |
| 26 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coatof primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Jul 21, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 12 daysJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender