Tender For Development Of Intergrateded Art And Craft Village At Guhaldihi Under Baripada Block In The District Of Mayurbhanj
Tender Value
17.83 Crore
Estimated cost
Bid Submission
20 Jul 2026
13 days left
EMD
17.83 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mayurbhanj → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Intergrateded Art And Craft Village At Guhaldihi Under Baripada Block In The District Of Mayurbhanj
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge. |
| 2 | Earthwork in excavation of foundation trenches in ordinary soil including dressing of sides and leveling the bed up to the required depth and depositing the excavated materials away from the work site with all leads and lifts, including shoring, shuttering and dewatering (if required) with cost of labour, hire & running charges of water pumps sundries & T&P required for the work complete as directed by the Engineer-in-charge. |
| 3 | Cleaning & grubbing road land including uprooting rank vegetation ,grass bushes ,shrubs,saplings & trees girth up to 300mm ,removal of stumps of trees cut earlier & disposal of unserviceable material & &stacking of serviceable material to be used or auctioned ,up to a lead of 1000meters including removal & disposal of top organic soil not exceeding 150mm in thickness comleted. |
| 4 | Filling at all depth with available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 15cm in depth: consolidating each deposited layer byramming and watering complete (lead upto 100m) as directed by the Engineer-In-charge. |
| 5 | Supplying and filling in foundation trenches and plinth, ditches with sand well-watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties, cost of all labour, sundries, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. (Measurement will be taken on finished compacted section only). |
| 6 | Providing and lying plain cement concrete of proportion (1:3:6) in Floor or similar location using Portland Slag Cement(PSC) with 4 cm. Size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm thick in each layer including cost, conveyance, loading, unloading, royalties, cost all labours, sundries, T & P required for the work including shoring, shuttering and dewatering if required including hire & running charges of water pump complete as per specification and direction of Engineer-in-charge. |
| 7 | Providing & laying Plain Cement concrete (PCC ) of proportion (1:2:4) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect as per direction of Engineer-in-charge |
| 8 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) 20 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 %) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position. |
| 9 | a) Footing |
| 10 | b) Plinth beam |
| 11 | c) Column |
| 12 | d) Roof beam |
| 13 | e) Lintel |
| 14 | c) Slope Roof |
| 15 | f) slab |
| 16 | g) Chajja |
| 17 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge. |
| 18 | First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 19 | First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 20 | First class Fly ash Brick masonry using bricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:4) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 21 | 12mm thick cement plaster (1:6) on brick work withscreened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 22 | Providing 16mm thick cement plaster (inside) in all floors at all height with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 23 | Providing 6mm thick cement plaster in RCC surfaces including deep chiping and slurry treatement at all floors at all height with cement mortar of mix (1:4) with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 24 | Providing and fixing 20mm (above 40 sqm) thick Granite stone flooring (sample of Granite stone should be approved by Engineer-In-Charge) for Floor and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights. |
| 25 | Preparing surface and painting at all height with one coat wall primer, well finished putty and two or more coats of interior Plastic Emulsion make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX/JINDAL/BIRLA or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge at all floors and all heights. |
| 26 | Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. |
| 27 | Supplying and fixing of Mangalore tiles of standard size in roof etc. |
| 28 | Painting 2 coats with any enamel paint on new iron work including cost of paint in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labour, etc. complete as per specification and direction of Engineer-in-Charge. |
| 29 | Dismantling brick or stone masonry in cement mortar under 3m height including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of theEngineering-in-charge/Consultant. |
| 30 | Dismantalling and removal of old RCC from beam, column, roof slab,self, chajja etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 31 | Dismantalling and removal of old plain cement concrete from foundation, floor etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 32 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 33 | Dismantalling and removal of old cement flooring etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 34 | Dismantalling and removal of old AC/GCI sheet roofing etc including stacking of servicable material and removal of debries to an unobjectionable area within 50 mtr lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 35 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 36 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge |
| 37 | Dismantling steel sections, grill etc including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un-loading, royalties, sundries, tools and plants, etc., complete as per the direction of the Engineering-in-charge/Consultant. |
| 38 | Removing old lime or cement plaster from walls in all floors including raking out joints 12mm deep and removing the debris within 50m lead etc. complete with cost, conveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as per specification and direction ofEngineering-in-charge/Consultant. |
| 39 | Dismantling grading concrete including stacking the useful materials for reuse and removing the debris within 50m lead including cost of all material, labour, conveyance, loading and un- loading, royalties, sundries, tools and plants, etc., complete asper the direction of the Engineering-in-charge/Consultant. |
| 40 | Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. |
| 41 | Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete asper the direction of the Engineer-in-charge. |
| 42 | Providing and fixing M.S grill of required patterns for windows/verandahs etc. with M.S flats, square or round bars etc. including applying a coat of approved steel primer and two or more coats of synthetic enamel paint of approved make & shade, all complete as per drawing & specification. (All steel sections contractor's own supply) at all floors and all heights. |
| 43 | Providing & laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works. (4th Revision) A.R.Page-166 & Item no.42 |
| 44 | Construction of granular sub-base by providing close graded granular sub base Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, & compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT & H Specifications for Road & Bridge works (4th Revision) A.R.Page-160 & Item no.39 |
| 45 | Supplying & Laying of Heavy Duty factory made hydraulically pressed and mecanically compacted pre cast interlocking pavers of 80mm thick, of approved shape, size, of M-40 grade with preparation of sub base with 50mm sand and levelling, laying of interlocking paver block with sand binding and compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and material etc. complete as per direction of EIC. |
| 46 | Supply and fixing Precast U-shape Drain model-MT-25 grade-M-35 Drain size (600 X 600 X 2000 MM) for 1 NOS and cover size ( 500X 732 X 145) for 4 nos ( Cover slab) etc. completed. |
| 47 | Supplying & Fixing of Pre Cast Kerb Stone of Size 600X300X150mm of M-30 Grade of approved Make, Design, Colour and Size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. |
| 48 | Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. |
| 49 | Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 50 | Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured / printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. |
| 51 | Providing tile flooring exterior grade vitrified tiles of premium grade 10mm thick conforming to IS 4457 of 300mmx300mm of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. |
| 52 | Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed bythe Engineer-in-charge |
| 53 | Providing and fixing Anodized System Aluminum three track Sliding glazed windows of TOSTEM / SHUECO/ ALUMIL make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 104 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5- 6 mm clear toughened.The system should allow glass thickness up to 10 mm. Thesystem should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. |
| 54 | Providing and fixing Lether finish Kota stone flooring (sample of Kotta stone should be approved by Engineer-In-Charge) for Floor and similar locations where ever required in horizontal/vertical surfaces of required size of approved shade, colour and texture, with moulding edge etc. laid over 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups including rubbing, curing, moulding and polishing to give high gloss finish etc. complete as per direction of Engineer-in-charge at all floors and all heights. |
| 55 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door /window /Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded Code Description Unit RateNo. 542 SUB HEAD : 26.0 NEW TECHNOLOGIES AND MATERIALS star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (Note-Including of M.S hold fast/lugs or SS dash fasteners etc.).(MAKE- AMULYA / ALSTONE ) |
| 56 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Including stainless steel butt hinges and necessary S.S screws etc.).35 mm thick (MAKE- AMULYA / ALSTONE ) |
| 57 | Providing and fixing factory made uPVC profile colour walnut sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.(MAKE- FENESTA /WINTECH/KOMORLING OR EQUIVALENT) |
| 58 | Painting with two coats of texture paint over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 59 | Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2 for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. |
| 60 | Cement leaping one coat to the external surface over the plastered surface with required pigment to give the effect of cowdung leaping and traditional Jhoti painting with weather proof paint including all materials,labours T&P and curing etc completeas per the direction of Engineer-in-charge. |
| 61 | Providing and fixing universal hydraulic door closer of Godrej / Hardwyn make with necessary accessories and screws etc. complete in all respect. |
| 62 | Providing and fixing bright finished 100 mm mortise latch and lock with 6 levers without pair of handles of approved quality for door, with necessary screws etc. complete as per direction of Engineer- in-charge. (Make Godrej) |
| 63 | Supplying fitting and fixing of Cast Iron Decorative Pillar of 9'-0'' height and 6'' dia etc as per approved design and specification. |
| 64 | Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) |
| 65 | Making design hole etc.1- TRIANGLE- L- 1'6\\", B- 1'6\\", H - 1'6\\". 2- SEMI CIRCLE- Dia- 1'6\\". Gap between triangle and semi circle - 9\\", and gap from top of the wall - 6\\" as per approved design and specification. |
| 66 | Furnishing |
| 67 | MULTIPURPOSE COMMUNITY CENTER |
| 68 | Providing and putting in position column/ wall paneling as per approved drawing made out of 12mm thick BWR fire retardant ply with 1mm thick laminate of approved shade & make including cost of all materials, carriage, loading & unloading, cost of all labour, T&P etc required to complete the work as per the direction of EIC. |
| 69 | Nilkamal CHR4040 Plastic Armless Chair as per approved design and specification. |
| 70 | Providing and fixing console table top using 18 mm thick commercial / BWR plywood, finished on top with 1.0 mm thick laminate, including PVC edge banding tape on exposed edges, adhesive fixing, smooth finishing, cutting to required size and complete in all respects as per approved design and specification..(6'-1\\"X1'-6\\"X3'-0\\") |
| 71 | Providing and fixing seasoned hardwood table legs of 75 mm × 75 mm x 900mm section, made in traditional carved / turned pattern, with smooth finished surface, anti-termite treatment, proper joinery with table frame, and finished with natural wood polish / melamine polish, complete in all respects as per approved design and specification.t. |
| 72 | Design, fabrication, and installation of a premium handcrafted Sabai Grass Wall Art Display made using eco-friendly, sustainably sourced Sabai grass by skilled rural artisans. The display features an elegant contemporary design with intricate handwoven patterns, natural textures, and durable finishing, making it suitable for offices, hotels, government buildings, galleries, cultural centres, and institutional interiors as per approved design and specification. |
| 73 | OFFICE ROOM |
| 74 | Enterprise Without CPU Hanger Office Desk 1350 W(Siam Teak, Sepia Brown, Metal Understructure, Wooden Top) as per approved design and specification. |
| 75 | Nilkamal Verona High Back Office Chair (Black) as per approved design and specification. |
| 76 | Providing and fixing false ceiling using 12.5 mm thick gypsum board suspended on GI framework consisting of perimeter channels, intermediate channels, ceiling sections and hangers, fixed with screws, including jointing tape, jointing compound, necessary suspension system, cutting, finishing smooth for paint application, and complete in all respects as per approved design and specification. |
| 77 | Design, fabrication, and installation of a premium handcrafted Sabai Grass Wall Art Display made using eco-friendly, sustainably sourced Sabai grass by skilled rural artisans. The display features an elegant contemporary design with intricate handwoven patterns, natural textures, and durable finishing, making it suitable for offices, hotels, government buildings, galleries, cultural centres, and institutional interiors as per approved design and specification. |
| 78 | Local Food display Room |
| 79 | Providing and fixing display shelves of size 1'-0\\" width × 8'-0\\" length using 18 mm thick commercial / BWR plywood, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, supported on decorative hardwood as per approved design and specification. |
| 80 | Metal hanging brackets fixed to wall / side panels, including bracket fixing, screws, fasteners and complete in all respects as per approved design and specification. |
| 81 | Providing and fabricating base cabinet of size 1'-6\\" width × 8'-0\\" length × 2'-6\\" height using 18 mm thick commercial / BWR plywood, with shutters and internal shelves as required, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, including necessary hardware, hinges, handles, locks, screws, fasteners and complete in all respects as per approved design and specification. (2 Nos) |
| 82 | Providing and fixing table top Display Counter Station using 18 mm thick commercial / BWR plywood, finished on top with 1.0 mm thick laminate, including PVC edge banding tape on exposed edges, adhesive fixing, smooth finishing, cutting to required size and complete in all respects as per approved design and specification. (5'-6\\"x2'-0\\") |
| 83 | Providing and fixing seasoned hardwood table legs of 75 mm × 75 mm section, made in traditional carved / turned pattern, with smooth finished surface, anti-termite treatment, proper joinery with table frame, and finished with natural wood polish / melamine polish, complete in all respects as per approved design and specification. |
| 84 | Providing and fixing table top Dinning seating using 18 mm thick commercial / BWR plywood, finished on top with 1.0 mm thick laminate, including PVC edge banding tape on exposed edges, adhesive fixing, smooth finishing, cutting to required size and complete in all respects as per approved design and specification.. (6'-0\\"x3'-0\\") |
| 85 | Nilkamal CHR4040 Plastic Armless Chair as per approved design and specification. |
| 86 | Costomise round Stainding Dinning table of Size - dia - 3', stand height - 3'6\\". Table top ply - laminate finish and stand woooden finish as per approved design and specification. |
| 87 | Providing and fixing seasoned hardwood standing Dinning table legs of 75 mm × 75 mm section, made in traditional carved / turned pattern, with smooth finished surface, anti-termite treatment, proper joinery with table frame, and finished with natural wood polish / melamine polish, complete in all respects as per approved design and specification. |
| 88 | AR/VR ROOM |
| 89 | Providing and fixing display shelves of size 1'-0\\" width × 8'-0\\" length using 18 mm thick commercial / BWR plywood, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, supported on decorative hardwood as per approved design and specification. |
| 90 | Metal hanging brackets fixed to wall / side panels, including bracket fixing, screws, fasteners and complete in all respects as per approved design and specification. |
| 91 | Providing and fixing display pedestal made of 18 mm BWR plywood, finished with 1 mm thick laminate on all exposed surfaces, including internal stiffeners, edge banding, and complete installation as per approved design and specification.. (2'-0\\"x1'-6\\"x3'-0\\") |
| 92 | Providing and fixing seating bench made of 18 mm BWR plywood with laminate finish on all exposed surfaces, including edge banding, supports, and installation as per approved design and specification. (5'-0\\"x1'-9\\"x1'-6\\")- 2nos |
| 93 | Providing and fixing blackout roller blinds made of high-quality blackout fabric with roller mechanism, including powder-coated aluminium tube, side brackets, chain operation system, bottom rail, necessary fittings and fasteners, complete with smooth operation, fixing to wall / window frame, and all materials and labour as per approved design and specification. |
| 94 | Providing and fixing acoustic wall paneling using fabric-wrapped acoustic panels consisting of 25 mm / 50 mm thick high-density acoustic infill (rockwool / polyester fiber) mounted on wooden / GI framework, finished with approved acoustic fabric on exposed surface, including backing support, edge finishing, fixing accessories, screws, fasteners and complete in all respects as per approved design and specification. for sound absorption and echo control as per approved design and specification. |
| 95 | Providing and fixing false ceiling using 12.5 mm thick gypsum board suspended on GI framework consisting of perimeter channels, intermediate channels, ceiling sections and hangers, fixed with screws, including jointing tape, jointing compound, necessary suspension system, cutting, finishing smooth for paint application, and complete in all respects as per approved design and site requirement. |
| 96 | ECONOMY ACTIVITY |
| 97 | Providing and fixing display shelves of size 1'-0\\" width × 8'-0\\" length using 18 mm thick commercial / BWR plywood, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, supported on decorative hardwood as per approved design and specification. |
| 98 | Metal hanging brackets fixed to wall / side panels, including bracket fixing, screws, fasteners and complete in all respects as per approved design and specification. |
| 99 | Providing and fabricating base cabinet of size 1'-6\\" width × 8'-0\\" length × 2'-6\\" height using 18 mm thick commercial / BWR plywood, with shutters and internal shelves as required, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, including necessary hardware, hinges, handles, locks, screws, fasteners and complete in all respects as per approved design and specification.. (5 Nos) |
| 100 | Weaving Station Providing and fixing table top using 18 mm thick commercial / BWR plywood, finished on top with 1.0 mm thick laminate, including PVC edge banding tape on exposed edges, adhesive fixing, smooth finishing, cutting to required size and complete in all respects as per approved design and specification.(6'-0\\"x3'-0\\") |
| 101 | Providing and fixing seasoned hardwood table legs of 75 mm × 75 mm section, made in traditional carved / turned pattern, with smooth finished surface, anti-termite treatment, proper joinery with table frame, and finished with natural wood polish / melamine polish, complete in all respects as per approved design and specification. |
| 102 | Providing and fixing low height craft work platform made of 18 mm + 12 mm thick BWR plywood with internal wooden framework, finished with 1 mm thick laminate on top surface, including edge banding, necessary hardware, and complete installation as per approved design and specification.(6'-0\\"x3'-0\\") |
| 103 | Providing and fixing seasoned hardwood table legs of 75 mm × 75 mm section, made in traditional carved / turned pattern, with smooth finished surface, anti-termite treatment, proper joinery with table frame, and finished with natural wood polish / melamine polish, complete in all respects as per approved design and specification. (1 feet height) |
| 104 | Providing and supplying floor seating cushion of size (450×450×100 mm) filled with high-density foam (40 density), covered with cotton fabric with zipper, including anti-skid bottom, complete as per approved design and specification. |
| 105 | ART & CRAFT DISPLAY |
| 106 | Providing and fixing table top using 18 mm thick commercial / BWR plywood, finished on top with 1.0 mm thick laminate, including PVC edge banding tape on exposed edges, adhesive fixing, smooth finishing, cutting to required size and complete in all respects as per approved design and specification.(8'-0\\"X3'-0\\"X3'-0\\") |
| 107 | Providing and fixing seasoned hardwood table legs of 75 mm × 75 mm x 900mm section, made in traditional carved / turned pattern, with smooth finished surface, anti-termite treatment, proper joinery with table frame, and finished with natural wood polish / melamine polish, complete in all respects as per approved design and specification. |
| 108 | Providing and fabricating base cabinet of size 1'-6\\" width × 8'-0\\" length × 2'-6\\" height using 18 mm thick commercial / BWR plywood, with shutters and internal shelves as required, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, including necessary hardware, hinges, handles, locks, screws, fasteners and complete in all respects as per approved design and specification. (5 nos) |
| 109 | Providing and fixing display shelves of size 1'-0\\" width × 8'-0\\" length using 18 mm thick commercial / BWR plywood, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, supported on decorative hardwood / metal hanging brackets fixed to wall complete in all respects as per approved design and specification. |
| 110 | Shelves Bracket fixing, screws, fasteners and complete in all respects as per approved design and specification. |
| 111 | Nilkamal Vento Chair (Milky White) |
| 112 | Providing and fixing false ceiling using 12 mm thick plywood panels over wooden framework / rafters, incorporating natural rattan inserts in required pattern, below pitched roof structure, including necessary MS/SS hardware, cleats, brackets, anchor fasteners and fittings for fixing wooden rafters to roof members, with 1.0 mm laminate finish on exposed plywood surfaces, including cutting, alignment, edge finishing, screws, fasteners and complete in all respects as per approved design and specification. |
| 113 | SHOWROOM |
| 114 | Providing and fabricating base cabinet of size 1'-6\\" width × 8'-0\\" length × 2'-6\\" height using 18 mm thick commercial / BWR plywood, with shutters and internal shelves as required, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, including necessary hardware, hinges, handles, locks, screws, fasteners and complete in all respects as per approved design and specification. (6 nos) |
| 115 | Providing and fixing display shelves of size 1'-0\\" width × 8'-0\\" length using 18 mm thick commercial / BWR plywood, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, supported on decorative hardwood / metal hanging brackets fixed to wall complete in all respects as per approved design and specification. |
| 116 | Shelves Bracket fixing, screws, fasteners and complete in all respects as per approved design and specification. |
| 117 | Textile Hanging Rod Providing and fixing Textile display hanging pipe of 4'-7\\" length made of 25 mm dia stainless steel pipe, fixed horizontally at 1'-0\\" projection from wall with suitable stainless steel brackets, flanges, end caps, screws and fasteners, complete with alignment, fixing and all materials and labour as per approved design and specification. (rmt) |
| 118 | Providing and fixing table top using 18 mm thick commercial / BWR plywood, finished on top with 1.0 mm thick laminate, including PVC edge banding tape on exposed edges, adhesive fixing, smooth finishing, cutting to required size and complete in all respects as per approved design and specification..(6'-0\\"X3'-0\\"X3'-0\\") |
| 119 | Providing and fixing seasoned hardwood table legs of 75 mm × 75 mm x 900mm section, made in traditional carved / turned pattern, with smooth finished surface, anti-termite treatment, proper joinery with table frame, and finished with natural wood polish / melamine polish, complete in all respects as per approved design and specification. |
| 120 | Providing and fixing false ceiling using 12 mm thick plywood panels over wooden framework / rafters, incorporating natural rattan inserts in required pattern, below pitched roof structure, including necessary MS/SS hardware, cleats, brackets, anchor fasteners and fittings for fixing wooden rafters to roof members, with 1.0 mm laminate finish on exposed plywood surfaces, including cutting, alignment, edge finishing, screws, fasteners and complete in all respects as per approved design and specification. |
| 121 | PERFOMANCE GALLERY |
| 122 | Stage Platform (9.58 m × 3.65 m, Height 0.75 m)Providing and fabricating stage platform of size 9.58 m × 3.65 m and height 0.75 m using MS square pipe framework of required sections, properly welded and fixed with intermediate supports, finished with 18 mm thick WPC board of 600 kg/cum density on top and exposed sides, including necessary wood battens / supports, cutting, fastening with screws, edge finishing, primer coat on steel members, and complete in all respects as per approved design and specification. |
| 123 | Providing and putting in position column/ wall paneling as per approved drawing made out of 12mm thick BWR fire retardant ply with 1mm thick laminate of approved shade & make including cost of all materials, carriage, loading & unloading, cost of all labour, T&P etc required to complete the work as per the direction of EIC. |
| 124 | Providing and fixing false ceiling using 12.5 mm thick gypsum board suspended on GI framework consisting of perimeter channels, intermediate channels, ceiling sections and hangers, fixed with screws, including jointing tape, jointing compound, necessary suspension system, cutting, finishing smooth for paint application, and complete in all respects as per approved design and specification. |
| 125 | Providing Nilkamal CHR4040 Plastic Armless Chair as per selected colour as per approved design and specification. |
| 126 | Providing and fixing acoustic wall paneling using fabric-wrapped acoustic panels consisting of 25 mm / 50 mm thick high-density acoustic infill (rockwool / polyester fiber) mounted on wooden / GI framework, finished with approved acoustic fabric on exposed surface, including backing support, edge finishing, fixing accessories, screws, fasteners and complete in all respects as per approved design and site requirement for sound absorption and echo control as per approved design and specification. |
| 127 | MASTER WEAVER ROOM |
| 128 | Providing and fixing display shelves of size 1'-0\\" width × 8'-0\\" length using 18 mm thick commercial / BWR plywood, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, supported on decorative hardwood as per approved design and site requirement. |
| 129 | Metal hanging brackets fixed to wall / side panels, including bracket fixing, screws, fasteners and complete in all respects as per approved design and specification. |
| 130 | Providing and fabricating base cabinet of size 1'-6\\" width × 8'-0\\" length × 2'-6\\" height using 18 mm thick commercial / BWR plywood, with shutters and internal shelves as required, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, including necessary hardware, hinges, handles, locks, screws, fasteners and complete in all respects as per approved design and specification.. (4 Nos) |
| 131 | Providing and supplying floor seating cushion of size (450×450×100 mm) filled with high-density foam (40 density), covered with cotton fabric with zipper, including anti-skid bottom, complete as per approved design and specification. |
| 132 | WEAVING MATERIAL |
| 133 | Providing and fixing display shelves of size 1'-0\\" width × 8'-0\\" length using 18 mm thick commercial / BWR plywood, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, supported on decorative hardwood as per approved design and specification. |
| 134 | Metal hanging brackets fixed to wall / side panels, including bracket fixing, screws, fasteners and complete in all respects as per approved design and specification. |
| 135 | Providing and fabricating base cabinet of size 1'-6\\" width × 8'-0\\" length × 2'-6\\" height using 18 mm thick commercial / BWR plywood, with shutters and internal shelves as required, finished with 1.0 mm laminate on exposed surfaces and PVC edge banding tape on edges, including necessary hardware, hinges, handles, locks, screws, fasteners and complete in all respects as per approved design and specification. (4 Nos) |
| 136 | Godown |
| 137 | Providing and fixing MS slotted angle storage rack of size (6'-0\\"×3'-0\\"×1'-0\\") with 5 shelves made of 1.0 mm thick CRCA sheet, supported on 40×40×2 mm slotted angle frame, finished with powder coating, including all hardware, complete in all respects as per approved design and specification. |
| 138 | Providing and supplying MS locker of Size (6'-0\\"x 3'-0\\"x1'-6\\")cabinet having 8 compartments made of 0.8–1.0 mm thick CRCA sheet, each locker with individual door, cam lock, handle, and internal partition, complete with powder-coated finish and MS base support, including all fittings and installation as per approved design and specification. |
| 139 | FOUNTAIN |
| 140 | Supplying, Installation & Commissioning of 1 set Sequential dome fountain (Dynamic) with light etc. 1- 3 HP,3 phase open well submersible pump set with necessary fittings (Make- KIRLOSKAR). 2- Electrical Panel in enclosure, consists of VFD (with reputed make), motor main switch, contactors, Controller, Sequencer, over load relays, switch fuses, on-off push button switch, switch fuses, indicating lamps etc complete with internal wiring .(Make- Premier Assoc). 3- Water Pattern- A 10ft. dia Stainless Steel GI ring made of 50mm pipe fitted with 60 nos. of 1/2” Brass heavy Swivel Nozzles in a circle forming Dome, All the jet are programmed for the Slow Motion Effect of the Dome Fountain. Each nozzle is fully adjustable for a precision effect and illuminating in different colour at night. Height of the water effect is around 10 feet (Make- Proprietary). 4- RGB LED light (LED Make of OSRAM/Epistar) with SS Body, 24V DC, 36 W IP 68 Certified (Make-Proprietary). 5- Galvanized manifold (Make- Proprietary). 6- Gate Valve (GI) with make of repute. 7- Submersible Copper cable for light & pump (Make- Polyab/Mescab/Equi.) For 5 mtr distance of control panel to pool. 8- Hydraulic Connection for fountain (Make of Repute). 9- Packing & Freight. 10 - Installation & Commissioning as per approved design and specification. |
| 141 | Supplying, fitting, fixing & Installation of series of bubbler fountain (18 nos) with light etc.1 7.5 HP,3 phase open well submersible pump set with necessary fittings (Make- KIRLOSKAR). 2 Electrical Panel in enclosure, consists of motor main switch, contactors, Controller, Sequencer, over load relays, switch fuses, on-off push button switch, switch fuses, indicating lamps etc complete with internal wiring. (Make- Premier Assoc) . 3 Water Pattern- A lane of Bubblers consisting of 18 nos. of Bubbler nozzles fitted in a GI pipe producing water bubble and creating a very beautiful ambient both in day and night (Make- Premier). RGB LED light (LED Make of OSRAM/Epistar) with SS Body, 24V DC, 18/36 W IP 68 Certified (Make-Proprietary). 5 Galvanized manifold (Make- Proprietary). 6- Gate Valve (GI) with make of repute. 7-Submersible Copper cable for light & pump (Make- Polyab/Mescab/Equi.) For 5 mtr distance of control panel to pool. 8-Hydraulic Connection for fountain (Make of Repute). 9- Packing & Freight. 10- Installation & Commissioning as per approved design and specification. |
| 142 | Supplying, Installation & Commissioning of water stream fountain with warm white lights etc. 1. One 3 HP and One 2HP,3 phase open well submersible pump set with necessary fittings (Make- KIRLOSKAR). 2- Electrical Panel in enclosure, consists of motor main switch, contactors, Controller, over load relays, switch fuses, on-off push button switch, switch fuses, indicating lamps etc complete with internal wiring. (Make- Premier Assoc). 3- Water Pattern- Water Stream Fountain with warm white colour. 4- Under Water LED Strip (Warm White) color of 120 feet with fittings. 5- Galvanized manifold (Make- Proprietary). 6- Gate Valve (GI) with make of repute. 7-Submersible Copper cable for light & pump (Make- Polyab/Mescab/Equi.) For 5 mtr distance of control panel to pool. 8- Hydraulic Connection for fountain (Make of Repute). 9- Packing & Freight. 10- Installation & Commissioning as per approved design and specification. |
| 143 | DECORATIVE TERRACOTA ELEPHANT HEIGHT:-6',LENGTH:-5',WIDTH:-2'6\\"'. High quality natural terracotta clay,hand sculpted and kiln fired for durability, thickness 30-40 mm. Internal support :- Mild steel (MS) internal support frame for strength, anti-rust primer coated. Base platfrom :- RCC concrete base foundation with granite/stone cladding base. Protective coating - waterproof terracotta sealer with exterior matte protective coating as per approved design and specification. |
| 144 | DECORATIVE OUTDOOR WOODEN BENCHES. HEIGHT:-3',LENGTH:-6',DEPTH:-2'. Premium Sagwan wood solid planks and natural log shaped arm support. Anti termite wood treatment,water resistance exterior coating. Internal support :- Hidden MS support frame of anti-rust coated metal . Base fixing - RCC concrete fixing base with anchor bolts for permanent outdoor installation as per approved design and specification. |
| 145 | ARTISTIC HORSE HEAD SCULPTURE WITH TREE BASE. SIZE HEIGHT:-7',DEPTH APPROX:-3',WIDTH APPROX:-3'6\\" High quality fibre reinforced plastic of thickness 8-12 mm FRP layer , reinforced with fibreglass mat and resin. Internal support with mild steel of anti-rust primer coated. RCC concrete foundation base with MS anchor bolts as per approved design and specification. |
| 146 | Design, fabrication, supply and installation of an Outdoor Wooden log for sitting with pu cotted, on-site installation for beautification of Guhaldhi Art and Craft Village. HEIGHT- 2', LENGTH- 1.5\\", WIDTH- 1.5\\" as per approved design and specification. |
| 147 | Design, fabrication & Installation of an Outdoor Decorative Sculpture made of FRP elements Sabai grass mural sculpture of size 18'x12'x3 (H x L x W) etc. including craft elements structural frame, lighting, electrification and on site Installation for beutification of Guhaldihi Art & Craft village. Structural steel frame - Heavy duty MS square pipe frame (50-75 mm) with welding ,grinding and anti-rust coating . Custom FRP rocks,wooden log texture pillars. Waterproofing UV coating.Concrete base foundation with anchor bolts, Landscaping with artificial grass,soil texture,decorative stone arrangement and ground finishing . Electrical - Out door waterproof LED spotlights (IP65) for sculpture illumination. Out door electrical wireing , PVC conduit and fittings. Swich board , MCB protection and power connection. Transportation - Transport of structure and material to site as per approved design and specification. |
| 148 | Design, fabrication, supply and installation of an outdoor Decorative sculpture consisting of FRP sculptural elements, printed village map board 18'x15'x4' (H x L x W), lighting system, structural base and electrification of Guhaldihi Art & Craft village.Structural Frame-Heavy duty MS frame using 50mm & 75mm square pipe, welding, grinding and anti-rust coating. FRP Decorative Sculpture Work - Custom FRP sculptural rocks, wood texture pillars and base decorative elements, weather resistant finish. Village Map 3 Display Board - 15 ft wide outdoor ACP/WPC panel with high resolution UV printing. Protective Coating - for map Outdoor anti-UV lamination and protective coating. RCC Foundation & 5 Base - Cement concrete base foundation with anchor bolts and leveling. Decorative Stone & base. Landscape Finish - Artificial grass, soil texture, natural stone arrangement. LED Architectural Lighting - Outdoor waterproof LED spotlights (IP65) for sculpture illumination. Electrical Wiring - Weatherproof wiring, PVC conduit, junction boxes. Electrical Control - Switch box with MCB protection and power connection. Transportation- Transport of structure, materials and equipment to site. Installation & Fixing - On-site erection, anchoring, finishing and testing as per approved design and specification. |
| 149 | Design, fabrication, supply and installation of an outdoor engraved stone sculpture with pu coated, on site installation for beautification of Guhaldihi Art & Craft village as per approved design and specification. HEIGHT- 4', LENGTH- 6',WIDTH- 2' as per approved design and specification. |
| 150 | MISC. |
| 151 | Design, fabrication & Installation of an Outdoor Decorative Sculpture made of FRP elements Sabai grass mural sculpture of size 18'x12'x3 (H x L x W) etc. including craft elements structural frame, lighting, electrification and on site Installation for beutification of Guhaldihi Art & Craft village as per approved design and specification. |
| 152 | Design, fabrication & Installation of an Hand mural FRP sculpture etc. including craft elements structural frame, on site Installation for beutification of Guhaldihi Art & Craft village.15\\" material fibre reinforced plastic(FRP), Finish- Antique bronze/metalic outdoor finish. Internal support- Mild steel frame structure with anti-rust primer cotted. Surface finish- Exterior grade automotive PU paint with antique bronze/metalic texture finish and UV resistance outer coatting as per approved design and specification.. |
| 153 | Design, fabrication, supply and installation of Wooden directional signage boards with printed letter boards, mounted on wooden posts for visitor guidance of size ( 4'5'' X 2') for Guhaldihi Art & Craft village as per approved design and specification. |
| 154 | Outdoor fountain stone sculpture etc.HEIGHT- 4', LENGTH- 3', WIDTH- 3'. Material - stone,water system,bamboo. Internal support structure- Mild steel frame structure with PU cotted. Best quality stone carved as like as fountain. Internal support - Mild steel frame structure inside sclpture with PU cotted as per approved design and specification. |
| 155 | Design, fabrication, supply and installation of an Outdoor Wooden log sitting with pu cotted of size ( 2', 1'5'', 1') for Guhaldihi Art & Craft village as per design and specification. |
| 156 | Supply and Installation of outdoor dual -compartment dustbin made of MS (Mild steel) structure with FRP/WPC wooden finish panels, suitable for public places as per approved design. HEIGHT- 2.5-3 FT , WIDTH- 2 - 2.5 FT. Main frame - Heavy duty mild steel (MS) with powder coated black finish. Cladding - Water resistance WPC/FRP wooden textured pannels. Compartment - Dual bin system (wet & dry waste segregation). Top cover- Slanted MS sheet with powder coating for rain protection. Base - Strong MS base plate for ground fixing. Finish - Anti-rust treatment + outdoor-grade paint. Accessories - Waste sinage stickers as per approved design and specification. |
| 157 | MISC.2 |
| 158 | DECORATIVE OUTDOOR WOODEN BENCHES. LENGTH - 6', HEIGHT - 3', DEPTH - 2'. Premium sagwan wood solid planks with natural log shaped arm support. Anti termite treatment,water resistance exterior coating and Exterior grade melamine/PU wood polish. Internal support- Hidden MS support frame with anti-rust coated metal parts. Base fitting - RCC concrete fitting base. Anchor bolts for permanent outdoor installation. Design and finish - Natural log style bench with back support finish with natural woood polish with weather protective coating as per design and specification. |
| 159 | Supply, fabrication & Installation of outdoor Signage board of size (1200mm X 900mm) including structure, foundation and fixing etc. specification- ACP board with UV print, structure heavy duty MS frame with anti rust coating, double pole fixing with concrete base etc. completed as per approved design and specification |
| 160 | Supply, fabrication & Installation of outdoor Signage board of size (800mm X 600mm) including structure, foundation and fixing etc. specification- ACP board with UV print, structure heavy duty MS frame with anti rust coating, double pole fixing with concrete base etc. completed as per approved design and specification |
| 161 | Supply, fabrication & Installation of outdoor Signage board of Cautionary Road sign 900mm Triangular / standard size including structure, foundation and fixing etc. specification- Reflective sheet with metal backing, structure G I pole with paint finish with concrete base etc. completed as per approved design and specification |
| 162 | Umbrella Shade Material Specification-Vertical pole - SS 316 gradeTop shade - FRPHeight - 8'Top Width - 6' |
| 163 | Supply and Installation of outdoor dual -compartment dustbin made of MS (Mild steel) structure with FRP/WPC wooden finish panels, suitable for public places as per approved design. HEIGHT- 2.5-3 FT , WIDTH- 2 - 2.5 FT. Main frame - Heavy duty mild steel (MS) with powder coated black finish. Cladding - Water resistance WPC/FRP wooden textured pannels. Compartment - Dual bin system (wet & dry waste segregation). Top cover- Slanted MS sheet with powder coating for rain protection. Base - Strong MS base plate for ground fixing. Finish - Anti-rust treatment + outdoor-grade paint. Accessories - Waste sinage stickers as per approved design and specification. |
| 164 | Design, fabrication and installation of decorative entrance gate for Guhaldihi Art & Craft Village including structural framework, artistic panels, lettering, painting and lighting arrangement as per approved design. SIZE OF THE GATE HEIGHT:-17',LENGTH:-24',WIDTH:-4' Name board:-Raised letters and board fabricated from FRP/Stainless steel / ACP /Wood . Finished with golden metalic paint / PU coating for high visibility.Exterior grade waterproof primer. Automotive/PU paint finishing,wood texture colour finish with protective clear coat. Main Structural Frame-Heavy duty MS (Mild Steel) square pipe frame structure.Sections approx. 50mm x 50mm / 75mm x 75mm depending on design load.Complete anti-rust treatment with red oxide primer.Decorative Artistic Panels-High quality FRP (Fiber Reinforced Plastic) panels with traditional art carving motifs.Thickness approx. 6-8 mm.Weather resistant and suitable for outdoor installation. Pillar Cladding & Wooden Finish-Exterior cladding using FRP / engineered wood texture panels to give traditional carved wood appearance. Roof Structure- MS support frame with terracotta style roofing tiles / FRP roof tiles/Iron roof sheets for village theme aestheticsas per approved design and specification |
| 165 | Design, fabrication, supply and installation of an outdoor Decorative sculpture consisting of FRP sculptural elements, printed village map board 18'x15'x4' (H x L x W), lighting system, structural base and electrification of Guhaldihi Art & Craft village.Structural Frame-Heavy duty MS frame using 50mm & 75mm square pipe, welding, grinding and anti-rust coating. FRP Decorative Sculpture Work - Custom FRP sculptural rocks, wood texture pillars and base decorative elements, weather resistant finish. Village Map 3 Display Board - 15 ft wide outdoor ACP/WPC panel with high resolution UV printing. Protective Coating - for map Outdoor anti-UV lamination and protective coating. RCC Foundation & 5 Base - Cement concrete base foundation with anchor bolts and leveling. Decorative Stone & base. Landscape Finish - Artificial grass, soil texture, natural stone arrangement. LED Architectural Lighting - Outdoor waterproof LED spotlights (IP65) for sculpture illumination. Electrical Wiring - Weatherproof wiring, PVC conduit, junction boxes. Electrical Control - Switch box with MCB protection and power connection. Transportation- Transport of structure, materials and equipment to site. Installation & Fixing - On-site erection, anchoring, finishing and testing as per approved design and specification. |
| 166 | Design, fabrication & Installation of an Outdoor Decorative Sculpture made of FRP elements Sabai grass mural sculpture of size 18'x12'x3 (H x L x W) etc. including craft elements structural frame, lighting, electrification and on site Installation for beutification of Guhaldihi Art & Craft village. Structural steel frame - Heavy duty MS square pipe frame (50-75 mm) with welding ,grinding and anti-rust coating . Custom FRP rocks,wooden log texture pillars. Waterproofing UV coating.Concrete base foundation with anchor bolts, Landscaping with artificial grass,soil texture,decorative stone arrangement and ground finishing . Electrical - Out door waterproof LED spotlights (IP65) for sculpture illumination. Out door electrical wireing , PVC conduit and fittings. Swich board , MCB protection and power connection. Transportation - Transport of structure and material to site as per approved design and specification. |
| 167 | Design, fabrication and installation of a traditional style entrance gate inspired by village bamboo architecture for Guhaldihi Art & Craft Village, including structural framework, decorative art panels, roofing, gate doors, painting and installation as per approved design.STRUCTURE SIZE HEIGHT:-16',LENGTH:-15',WIDTH:-3'. Foundation and base structure - Strong RCC foundation constructed using cement ,snd and aggregate (M20 grade). Reinforcement using TMT steel bars for durability and load bearing capasity. Stone / brick masonary base finishing as per design.Main Structural Frame - Heavy duty MS (Mild Steel) square pipe frame structure .Sections approx. 50mm x 50mm / 75mm x 75mm depending on design load. Complete anti-rust treatment with red oxide primer.Decorative Artistic Panels- High quality FRP (Fiber Reinforced Plastic) panels with traditional art carving motifs. Thickness approx. 6-8 mm. Weather resistant and suitable for outdoor installation. Pillar Cladding & Wooden Finish- Exterior cladding using FRP / engineered wood texture panels to give traditional carved wood appearance.5. Roof Structure- MS support frame with terracotta style roofing tiles / FRP roof tiles/Iron roof sheets for village theme aesthetics as per approved design and specification. |
| 168 | LANDSCAPING |
| 169 | Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of land manure before and after flooding trench with water (excluding thecost of imported earth, sludge or manure). |
| 170 | Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift. |
| 171 | Supplying and stacking sludge at site (sludge measured in stacks will be reduced by 8% for payment) with all lead andlift. |
| 172 | Supplying and stacking at site dump manure from dumping place nearest to site of work. (manure in stack will be reduced by 8% for payment) with all lead and lift. |
| 173 | Screened through sieve of I.S designation 20 mm. |
| 174 | Screened through sieve of I.S designation 16 mm. |
| 175 | Screened through sieve of I.S designation 4.75 mm. |
| 176 | Rough dressing the trenched ground including breakingclods. |
| 177 | Uprooting weeds from the trenched area after 10 to 15 daysof its flooding with water including disposal of up rooted vegetation with all lead and lift. |
| 178 | Fine dressing the trenched ground. |
| 179 | Spreading of sludge, dump manure or land good earth in required thickness. (Cost of sludge, dump manure or/andgood earth to be paid separately). |
| 180 | Mixing earth and sludge or manure in proportion specified or directed. |
| 181 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction ofofficer in charge |
| 182 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establishproperly, as per direction of officer-in-charge. |
| 183 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludgeshall be paid for separately). |
| 184 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth ifneeded to be paid for separately) |
| 185 | Holes 60 cm dia, and 60 cm deep |
| 186 | Holes 45 cm dia, and 45 cm deep |
| 187 | Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. |
| 188 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm |
| 189 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicularheight. |
| 190 | Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. |
| 191 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. |
| 192 | Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) |
| 193 | Trees Plant |
| 194 | Shrubs Plant |
| 195 | Hedge Plant |
| 196 | Providing and displaying of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot /Plastic pot & as per direction of the officer-in-charge. |
| 197 | Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. |
| 198 | Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 199 | Providing and displaying of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot& as per direction of the officer-in-charge. |
| 200 | Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge. |
| 201 | Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. |
| 202 | Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of theofficer-in-charge. |
| 203 | Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot &as per direction of the officer-in-charge. |
| 204 | Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer incharge. |
| 205 | Providing and Displaying plants Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/PlasticPot and as per direction of the officer-in-charge. |
| 206 | Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction ofthe officer-in-charge. |
| 207 | Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as perdirection of the officer-in-charge. |
| 208 | Providing and Displaying Acalypha green plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot bushyplant as per direction of the officer-in-charge. |
| 209 | Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge. |
| 210 | Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of theofficer-in-charge. |
| 211 | Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cmCement Pot as per direction of the officer-in-charge. |
| 212 | Supply and stacking of Acacia auriculiformis plant of ht 150- 165 cm in bag size of 25 cm as per direction of the officer-in-charge. |
| 213 | Supply and stacking of Adansonia digitata (kalp vricksh)plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. |
| 214 | Supply and stacking of Azadirachta indica ( Neem ) plant ofheight 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 215 | Supply and stacking of Bottle palm plant of ht. 210-240 cmbottom girth 30-35 cm well developed in big HDPE bags. |
| 216 | Supply and stacking of Casuarina equisetifolia plant ofheight 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 217 | Supply and stacking of Ficus nuda plant of height 120-135cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. |
| 218 | Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as perdirection of the officer-in-charge.v |
| 219 | Supply and stacking of plant Bauhinia acuminata height 60- 75 cm. in earthen pots of size 20 cm as per direction of theofficer-in-charge. |
| 220 | Supply and stacking of plant Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in bigsize HDPE bag as per direction of the officer-in-charge. |
| 221 | Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cmas per direction of the officer-in-charge. |
| 222 | Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as perdirection of the officer-in-charge. |
| 223 | Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. |
| 224 | Supply and stacking of Jasminum humile (Yellow) plant ofheight 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 225 | Providing and fixing overhead type sprinkler system with self closing valve type 25mm X 20mm with self closing spring made up of alluminium alloy and brass fittings including cost of all materials, labour, T & P etc complete as per direction ofEngineer-in-charge. |
| 226 | Supplying all materials, labour, T&P and fixing 15mm dia CP Bib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. Make: Jaquar/Grohe/Johnson/Roca |
| 227 | Supplying all materials, labours, T&P and fitting and fixing of the 20mm dia CPVC pipe confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) |
| 228 | P.H Work Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge (Ashirbad/Supreme/Oripalst)GF Floor -20mm dia C-PVC pipe (Ashirbad/Supreme/Oripalst) |
| 229 | 25mm dia C-PVC pipe |
| 230 | Supplying all materials, labour,T&Pand providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/04 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast) Ground Floor 25mm PVC (Sch-80) Pipe |
| 231 | 32mm PVC (Sch-80) Pipe |
| 232 | 40mm PVC (Sch-80) Pipe |
| 233 | 50mm PVC (Sch-80) Pipe |
| 234 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.G. Floor |
| 235 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.G. Floor |
| 236 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per the direction of the Engineer in chargeG. Floor |
| 237 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge250mm to 375mm thick wall G. Floor |
| 238 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. |
| 239 | 15mm dia long body Bib Cock cock (Jaquar)-CON-CHR-107KN |
| 240 | 15mm dia CP S.B Bib cock (CON-CHR-037KN) |
| 241 | 20mm dia CP concealed stop cock(Jaquar)CON-CHR-087KN |
| 242 | 15mm dia CP angle stop cock (FLR-ACR-5053N) |
| 243 | 15mm dia CP Pillar cock (Jaquar)CON-CHR-021KN |
| 244 | 15mm dia CP Health faucet.ALD-CHR-579 |
| 245 | 15mm dia Two way Bib Cock (Jaquar)-CON-CHR-041KN |
| 246 | Shower Arm (SHA-CHR-477) |
| 247 | Over head shower 100mm dia round (OHS-CHR-1999) |
| 248 | 32mm dia CP Bottle trap Jaquar/Cera/hindware/equivalent Make -ALD -CHR-769L -300x190cm, |
| 249 | Soap Dispenser with glass bottle(ACN-CHR-1135N) Jaquar/Cera/hindware/equivalent Make |
| 250 | CP soap Dish holder (Jaquar make)-AKP -ABR-35731P Jaquar/Cera/hindware/equivalent Make |
| 251 | Towel Ring Round - (As Per Jaquar,Cat no.:ACN-CHR-1121BN), Jaquar/Cera/hindware/equivalent Make |
| 252 | 600mm long CP towel rail(Jaquar)-ACN-IVY-1111NM, Jaquar/Cera/hindware/equivalent Make |
| 253 | 32mm Full Thread Waste Coupl. (Jaquar) ALD-CHR-705 |
| 254 | 450mm Braided hoses (Jaquar- ALD-CHR-805B) |
| 255 | Double coat hook (Cat. No. AKP-CHR-35761P of Jaquar) |
| 256 | Toilet Paper Holder(Jaquar)No.ACN-CHR-1153S |
| 257 | 25mm dia brass or gun metal full way valve(shakti make) |
| 258 | 32mm dia brass or gun metal full way valve(shakti make) |
| 259 | 40mm dia brass or gun metal full way valve(shakti make) |
| 260 | 50mm dia brass or gun metal full way valve(shakti make) |
| 261 | 15mm dia CP Flange |
| 262 | 15mm dia CP Extention Nipple |
| 263 | 125mm CP grating |
| 264 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. Fixing 2000 Ltr Roto-moulded water storage tank (Syntax Make) (3 layer)on the roof of First floor |
| 265 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge. 600mmx125mm size glass shelf with C.P gruard rail(Jaquar-ACN-CHR-1171N) |
| 266 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5m thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the Engineer in charge. Design Mirror(Parryware) |
| 267 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In (Ashirbad /Oriplas/Oriplast)Ground floor |
| 268 | 110mm dia U-PVC SWR pipe |
| 269 | 75 mm dia UPVC SWR Pipe |
| 270 | 110mm U-PVC door tee |
| 271 | 110mm U-PVC Plain tee |
| 272 | 110mm U-PVC door bend |
| 273 | 110mm U-PVC plain bend |
| 274 | 110mm dia U-PVC 'P' trap |
| 275 | 110mm dia U-PVC Plain Shoe Bend |
| 276 | 110mm dia U-PVC offset with out ear |
| 277 | 110mm dia U-PVC cowl |
| 278 | 75 mm dia UPVC plain bend (supreme/ashirvad) |
| 279 | 75 mm dia UPVC plain Tee (supreme/ashirvad) |
| 280 | PVC clamp suitable for 75 mm to 110mm dia pipe |
| 281 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plain (Parryware/Hendware/Cera/Somany/Kerovit) |
| 282 | Supplying all materials , labour, T&P and fixing Vitreous china water closet ,squatting pan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'P' or 'S' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. 580mmx440mm size Orissa pan ((Parryware/Hendware/Cera/Somany/Kerovit) |
| 283 | Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm) (head)70002 |
| 284 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern with 32mm dia CP long flush bend Slimline white (Parryware/Hendware/Cera/Somany/Kerovit) |
| 285 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Half stall urinal (Jaquar/Parryware / Hindware make). URS-WHT-13253N Urinal (Back Inlet) |
| 286 | 15mm dia urinal spreader |
| 287 | 32mm dia C.P. dome waste |
| 288 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in chargeTable top basin JDS-WHT-25935 (Jaquar make) |
| 289 | Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 80 PSS UV (Eureka Forbes) of size 750x570x1350mm height with water storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge. |
| 290 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as aper specification and direction of the E.I.C. |
| 291 | Ground Floor;- |
| 292 | Supplying all materials, labour, T&P and fixing Granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge In Ground floor |
| 293 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge . |
| 294 | Ground Floor;- |
| 295 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany / Johnson to be pre-approved 600 x 600mm of size In Ground Floor |
| 296 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. Kajaria / Somany 30cm x 60 cm size of |
| 297 | Ground Floor;- |
| 298 | Providing & Applying priming one coat with Cement primer of approved brand and manufacture on plaster surface as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
| 299 | Ground Floor;- |
| 300 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surfaces to prepare the surface even and smooth as per the instruction of Engineer-In-Charge at all elevations including all material & labour complete. |
| 301 | Ground Floor |
| 302 | Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion \\"Royale Shyne\\" of Asian Paints or equivalent of approved shade as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge. |
| 303 | Ground Floor |
| 304 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 305 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge |
| 306 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm |
| 307 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm |
| 308 | R.C.P.C Cover |
| 309 | Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm |
| 310 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.1.40m dia x 2.00m deep soakway pit |
| 311 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. |
| 312 | 110mm dia U-PVC Alround Concrete |
| 313 | 160mm dia U-PVC Alround Concrete |
| 314 | Construction of 50 users RCC septic tank-1 No |
| 315 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge. |
| 316 | 1x6.10x2.70x1.50 |
| 317 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 1x6.10x2.70x0.30 |
| 318 | Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department. |
| 319 | 1x6.10x2.70x0.70= |
| 320 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge. |
| 321 | 1x6.10x2.70x0.20 |
| 322 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 323 | 1x6.10x2.70x0.20 |
| 324 | Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 325 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 326 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 327 | R.C.C beams,columns,girder and bressmer etc. |
| 328 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 329 | In Ground Floor per 0.80 qtl/cum |
| 330 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 331 | In ground floor |
| 332 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 333 | In ground floor |
| 334 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 335 | In ground floor |
| 336 | Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 337 | In F&P |
| 338 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 339 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 340 | Supplying all materials, labour, T&P and fitting and fixing 160mm UPVC plain Tee as per P.H.D.specification and direction of the E.I.C. |
| 341 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 342 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. |
| 343 | 110mm U-PVC cowl |
| 344 | Construction 1 nos 20 users RCC Septic tank |
| 345 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge. |
| 346 | 1x3.00mx1.80x1.50m= |
| 347 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge. with addl. Depth of 1.5 m |
| 348 | Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department. |
| 349 | 1x3.00x1.80x0.70= |
| 350 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge |
| 351 | In ground floor |
| 352 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 353 | In ground floor |
| 354 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 355 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 356 | For RCC wall |
| 357 | Inside |
| 358 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 359 | In ground floor |
| 360 | Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 361 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 362 | Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 160mx160mx160m as per P.H.D.specification and direction of the E.I.C. |
| 363 | Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete. |
| 364 | Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. |
| 365 | 110mm diameter U-PVC SWR pipe |
| 366 | 110mm dia U-PVC Cowl |
| 367 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 368 | 1 x2 x(3.00+1.50) x 0.15 x 2.00 |
| 369 | Sinking of 200 mm dia (8\\") Gravel Packed Production Well including saline sealing where necessary through Rotary Drilling Rig 300 Mtrs with PVC/ GI Casing Pipes(1 nos.) |
| 370 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by Mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of finished bore suitable for lowering of 200 mm dia GI/PVC pipes for housing, fitted with socket and with or without well screen as per the necessity for the soft, medium, hard and boulder formation (GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion) including lower and withdrawing of casing pipe after drilling 200 mm to 450 mm dia in over burden portion. |
| 371 | 00 mtrs. to 100 Mtrs. |
| 372 | Supply of all labour & T&P for lowering the following size G.I./PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and fixing all jointing materials etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fittings & jointing materials. |
| 373 | 00 mtrs. to 300 Mtrs. |
| 374 | Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge. |
| 375 | Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in the bore around the 200mm dia P.V.C. Casing pipe etc all complete as per the direction of the Engineer-in-Charge. (Excluding the cost of Cement.) |
| 376 | Supplying all labour,T&P and materials for packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc complete as per the direction of the Engineer-in-Charge. |
| 377 | Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3 mtrs. Below ground level including cost of cement all complete as per the direction of Engineer-in-Charge |
| 378 | Cost of 200 mm dia PVC Pipe |
| 379 | Cost of cement |
| 380 | Cost of sand 75m |
| 381 | washed gravel |
| 382 | Cutting slots in casing pipe |
| 383 | Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge. 1.50 H.P single phase 3 stage head range 20 to 35 metres, discharge 145 to 110 L.P.M with outlet dia of 25mm |
| 384 | DOL controll pannel |
| 385 | 2.5 Sqmm flat cable |
| 386 | 32mm dia Steel short piece |
| 387 | Steel roop with cover |
| 388 | Well cap |
| 389 | 50mm size CI bracket |
| 390 | 20mm dia rigid UPVC pipe |
| 391 | 32mm Dia brass non return valve(Shakti make) |
| 392 | 32mm dia HDPE pipe |
| 393 | Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site. |
| 394 | Supply all materials,labours,T&P and construction bore well protection chamber of the inside size 650x650x1000 height with cement concrete ( 1;3;6) using 40 mm size hard granite metal on foundation,1st class fly ash brickwork incement motar(1:3),with base cement concrete (1:2:4) useing 12 mm size h.g chips ,12 mm thick cement plaster (1:4) inside and out site ,R CC cover slab in (1:1.5:3) using 12 mm size h.g chips earthwork in excavation in all kinds of soil and refiling the cavity around the chamber including watering ,curing,convayance of all materials to worksite,payment of royalty,taxes etc all complete as per approved specification and direction of the engineer-in -charge. Bore well protection chamber. |
| 395 | Sub-Head I (modular Wiring Items) |
| 396 | Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. |
| 397 | GROUP-A |
| 398 | GROUP-B |
| 399 | GROUP-C |
| 400 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 401 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius ) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 402 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 403 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 404 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 405 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 406 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI /V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB) (4X6+2X4) |
| 407 | Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI /V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6) |
| 408 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 409 | Supplying,fixing of 2 nos 6A Plug on the separate board with complete fitting by 02 no of 6A switch & socket(modular type)( (flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 410 | Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover.Make- Havells/Anchor as required as per direction of Engg.-in-Charge.All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 411 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 412 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) |
| 413 | Sub-Head II (Light fitting Fixture & Fan) |
| 414 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 415 | Supply, Installation, Testing and Commissioning of Duct mounted Single skinned Circular Inline Centrifugal Fan for Toilet Ventilation with direct driven Backward-curved impellers.The Fan has external rotor motor suitable for 1~, 230V, 50 Hz power supply. MAKE - SYSTEMAIR/ GREENHECK/ ELTA/Airflow 1500 CFM @ 15mm MMWG static pressure |
| 416 | Supply & Fixing of Air Distribution Duting fabricated with Class VI GI Sheet(180 GSM) Complete With Supports, dampers, guiding vanes, access doors, MS Angle, Fire inhibiting gaskets, Nuts, bolts and all oyher accessories in accordance with approved drawing and the Specification. (Make:- Jindal/ Sail/ Tata)22 gauge (0.80 mm thickness) |
| 417 | 24 gauge (0.63 mm thickness) |
| 418 | Supply, erection, testing & commissioning of Aluminium powder coated grills/diffuser without VCD having flange all around.Make-Glenstorm/Airflow/Systemaire |
| 419 | Supplying, installation, testing and commssioning of 1200 mm sweep Copper wound BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix /Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. |
| 420 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 421 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 422 | SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years |
| 423 | Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge .(Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved. |
| 424 | SITC of recess/surface mounted 2'x2'(595mmx595mmx70mm(+/-5%) square shaped LED made up of CRCA powder coated housing with lumen efficacy not less than 140lm/W and lumen output not less than 3600 lumens , CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/ LT/ Havells / Philips/ Wipro/ Crompton/ Bajaj) . The luminaire must be Replacement Warranty will be 5 years. |
| 425 | SITC of indoor rated IP20 5mtr LED Strip, operating in an ambient temperature of 0⁰C to 45⁰C. Operating at 50Hz frequency, housing of Polymide double sided PCB. LEDs used in the product shall comply with IEC 62471 for Photo-biological safety. Luminaire should have 70lm/mtr and total 350lumen in maximum 25Watt for 5mtr role. The LED shall comply with L70 life of 35000 burning hours tested at maximum current. The LEDs used should be with CCT of 3000/4000/5700 K. LED Driver shall be external type, suitable to operate in input voltage range of 140V to 300V (nominal rated voltage – 240V) with 3KV internal surge protection, Power factor of minimum 0.9, driver efficacy of minimum 85% and total harmonic distortion (THD) of less than or equal to 20% should be integral to the luminaire. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 426 | SITC of 20 watt LED focus track light with 1mtr track as per the direction of Engineer-in-charge. (Make:K-LITE Model No- 23678 Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 427 | SITC of 12 watt LED COB light made up of die cast aluminium body & Clear polycarbonate diffuser with 100Lm/Watt, Citizen COB, IP-54, SDCM<3, CRI 90, CCT - 3000K, as per the direction of Engineer-in-charge. (Make: K-Lite Model No - 28178 / Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 428 | BDBS,DB,AC DB,FLOOR PANELS,MCBS |
| 429 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ABB Itus as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years |
| 430 | Supply and fixing of 8 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator).Warranty on DB is 3 years (toilet,ticket counter,ups of food av,galerry,art craft) |
| 431 | 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years (FOR art craft,eco,galerry,food av,com hall,godown power light)) |
| 432 | 8 Way(8+24) Way TPN MCB DD DB Horizontal Type suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(FOR POWER & INDOOR AC DB)Warranty on DB is 3 years (FOR art craft,eco,galerry,food av,com hall power light,godown power)) |
| 433 | 2+4 way MCB Enclosure DB (GLAZED door)(only each EM. CONNECTION UPS LOAD)Warranty on DB is 3 years (ups of galerry,eco,art) |
| 434 | Supplying and fixing 6- 32 amps rating, 240 volts, C series, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 years .for 2+4way db |
| 435 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 . the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 years. |
| 436 | Supplying and fixing 40Amps 4P 415 volts, MCB Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 years |
| 437 | Supplying and fixing 40 Amps rating, RCCB 30mA,415V . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year. |
| 438 | Supplying and fixing 40 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year. |
| 439 | Supplying and fixing 63Amps 4P 415 volts MCB 415 volts, C series,10KA breaking capacity, Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB with connections as per direction of Engg.-in-Charge..Warranty on MCB is 3 years. |
| 440 | Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The RCCB should be Replacement Warranty will be 1 year. |
| 441 | Supplying and fixing 40Amps 2P 240 volts RCCB 30 mA Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..The RCCB should be Replacement Warranty will be 1 year. |
| 442 | CABLING AND END TERMINATION MAIN AREA |
| 443 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster of following size cables as per direction of Engg.-in-Charge. |
| 444 | 4core x 16 sq mm(BDB IC) |
| 445 | 3.5core x 150 sq mm DG |
| 446 | 3.5core x 95 sq mm (EV,ALL SUB PANEL) |
| 447 | 3.5core x 50 sq mm (SUB PANEL 2W EV) |
| 448 | 3.5core x300 sq mm (MAIN PANEL MAIN IC) |
| 449 | LAYING OF CABLE |
| 450 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 451 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 452 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. |
| 453 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. |
| 454 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in open duct etc as required as per direction of Engg.-in -charge. |
| 455 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM in open duct 400 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge. |
| 456 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 457 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 458 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 459 | Supplying and making end termination with 4 core x16 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 460 | Supplying and making end termination with 3.5 core x95 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 461 | Supplying and making end termination with 3.5 core x150 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 462 | Supplying and making end termination with 3.5 core x50 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 463 | Supplying and making end termination with 3.5 core x300 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 464 | Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. |
| 465 | 50 mm dia |
| 466 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials(make-Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster ) |
| 467 | Supplying,laying of 3cx2.5 sq.mm AL armoured XLPE cable with insulated cover with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials(make-Finolex/Polycab/HAVELLS/RR KABLE/KEI/Gloster ) |
| 468 | Supplying,laying of 3cx6 sq.mm AL. armoured XLPE cable with insulated cover with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials(make-Finolex/Polycab/HAVELLS/ RR KABLE/KEI/Gloster ) |
| 469 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 470 | 50 mm dia |
| 471 | PANELS |
| 472 | MAIN CONTROL PANEL NEAR MULTI PURPOSE HALL |
| 473 | S/I/T&Commissioning of LT OUTDOOR floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.3P+N Type 1+2 SPD 65 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 80X10MM Separate Aluminium Earth bus bar should be installed.Provision of cable alley chamber is mandatory. All the feeders shall have ON/OFF/TRIP indication. |
| 474 | In commer-1-01 number of 630A 4P Icu=100%Ics,36Ka LSIG MCCB with microprocessor release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 475 | In commer-2- 01 number of 200A 4P Icu=100%Ics,25Ka MCCB with TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 476 | Changeover- 01 no of 200A 4P onload changeover switch ( DG 01 NO)(Make-Legrand/Siemens/Schneider/ABB) |
| 477 | Busbar-1&2 04 numbers of 800Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) |
| 478 | Out going- 01 numbers of 200 Amps 4P MCCB.Icu=100%Ics,25Ka TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 479 | Out going- 07 numbers of 125Amps 4P MCCB.Icu=100%Ics,25Ka TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 480 | Out going- 02 numbers of 160Amps 4P MCCB.Icu=100%Ics,25Ka TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 481 | Out going- 9 numbers of 100-63Amps 4P MCCB.Icu=100%Ics,16Ka TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 482 | Out going- 1 number of 100Amps 4P MCCB Motorized .Icu=100%Ics,25Ka ,LSING ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula for Solar on grid integrate . |
| 483 | Outgoing- 4 nos. 32A 4P MCB, C series, 10 ka , Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 |
| 484 | Outgoing- 8 nos. 32A 2P MCB, C series, 10 ka , Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200(Among it 2 nos with space for KWH Meter for shop) |
| 485 | Instrument- (i) 06 numbers phase indicating lamp with toggle switch & HRC fuse. |
| 486 | (ii) 02 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication(iii) All the MCCB outgoing feeders shall have digital ammeter with CT of suitable class 1 rating.(Make-Legrand/Siemens/Schneider/ABB)(iv) 3P+N Type 1+2 SPD 65 kA with 100A 4P MCCB,25kA, TMR, Ics=100%Icu shall be installed in the incomers. (Make of SPD-Legrand/Siemens/Schneider/ABB),Make of MCCB-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 487 | MAIN CONTROL PANELGODOWN.LOCAL FOOD,GALLERY,ART & CRAFT,MULTI HALL) |
| 488 | S/I/T&Commissioning of LT INDOOR floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.3P+N Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.Provision of cable alley chamber is mandatory.All the feeders shall have ON/OFF/TRIP indication. |
| 489 | In commer-1-01 number of 125A 4P Icu=100%Ics,25Ka MCCB with TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 490 | In commer-2- 01 number of 100A 4P Icu=100%Ics,25Ka MCCB with TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 491 | Changeover- 01 no of 100A 4P onload changeover switch ( DG 01 NO)(Make-Legrand/Siemens/Schneider/ABB) |
| 492 | Busbar-1&2 04 numbers of 200Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) |
| 493 | Out going- 4 numbers of 6-32A 2P MCB10KA,C series ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) |
| 494 | Out going- 4 numbers of 6-32A 4P MCB10KA,C series ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) |
| 495 | Out going- 3 numbers of 63A 4P MCB10KA,C series ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) |
| 496 | Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. |
| 497 | (ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication(iii) 3P+N Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. (Make of SPD-Legrand/Siemens/Schneider/ABB),Make of MCB-LEGRAND-DX3 / Siemens-Betaguard Model/ Schneider-Acti-9 /ABB SB200 |
| 498 | CABLE TRAY /RACE WAY FOR DISTRIBUTION OF POWER |
| 499 | Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 200mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge. |
| 500 | Supply ,installation ,testing & commissioning of 5 KVA UPS SYSTEM WITH IGBT based inverter system, true online double conversion system, inbuilt isolation transformer & automatic phase sequence corrector of 3ph in put to 1 ph output,415V, with built in BMS with battery back up up to 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and links for installation (Battery required: 12V, 42AH, 20 No.s) protection for fault by OL,UV,EF,GF,OC,Ph. (Make:Numeric/APC/ Vertiv/) , as per direction of Engg.-in-Charge. Warranty period of all accessories & component & system must be 2 years & complete test certificate must be submitted along with ups including component list & SLD. for AV,ART CRAFT,GALERRY,MULTI HALL) |
| 501 | EARTHING |
| 502 | Supplying,installation,testing & commissioning Of Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required as per direction of Engg. in charge. |
| 503 | Supplying & laying of 6 swg GI WIRE at 0.5m below the ground as strip earth electrode including connection/termination with nut ,bolt ,spring washer etc as required(jointing shall be done by over laping and with 2 sets of brass nut ,bolt & spring washer spaced at 50mm . as required as per direction of Engg. in charge. |
| 504 | Supplying & laying of 25mm x 5 mm GI strip at 0.5m below the ground as strip earth electrode including connection/termination with nut ,bolt ,spring washer etc as required(jointing shall be done by over laping and with 2 sets of brass nut ,bolt & spring washer spaced at 50mm . as required as per direction of Engg. in charge. |
| 505 | LIGHT SYSTEM EXTERNAL |
| 506 | Supply, installation, testing and commissioning of LED Design based BIS approved LED Street Light with system power of 120W, CCT in 5700K as per ANSI) ,CRI>70, SDCM<3 , LEDs used should have a life of 50,000 burning hrs. & Lumen maintenance as per L70. The Luminaire System lumens should be >=19,200 Lumens @5700K. The fixture housing must be Made of ADC 12 PDC Aluminium housing for rapid thermal healing & Powder coated by Corrosion resistant Nano coating technology. Luminaire must have a Ingress protection of IP66 and Impact Resistance of IK08. The light engine should use Metal Core PCB with high grade aluminium (AL5052) and should have a thermal conductivity of >2W/mK. The fixture should have an UV stabilized Injection moulded special PC lens optics(Glass not allowed) ensuring low glare & best in class uniformity. The light and the driver compartment should be thermally isolated by a natural airgap. Luminaire housing and optical compartment both should carry OEM's logo embossed / engraved (no stickering is allowed). The luminaire must have Integral encapsulated high efficiency electronic thermally isolated driver having a Aluminium extrusion construction with rated voltage of 100-300V, power factor > 0.95, THD < 10%, with Inbuilt surge protection of min 6KV and upgraded with integrated IP67 protected SPD of 20KV/10KA surge protection with all necessary safety protection like mis-wiring, Over voltage, Short circuit, Reverse Polarity protection. . The compartment should be bottom openable for ease of maintenance at site. Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. Following documents to be submitted after award of contract: Luminaire and Driver TDS, Photometry report, Type test certificate, IP, IK, Vibration and salt spray test certificates from NABL accredited Laboratory, LM80 from LED OEM., CE Certification, ROHS compliant, BIS Certificate for Luminaires & Drivers. The warranty on light fixture shall be 5 years. (Make: PHILIPS/WIPRO/BAJAJ/Crompton/PANASONIC/LT/HAVELLS) |
| 507 | Supply of 8 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(with decorative single arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 155 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge. |
| 508 | Supply of 8 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel(with decorative DOUBLE arm) as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 155 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge. |
| 509 | Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with street light on that foundation(Details Drawing of the foundation attached). The work shall be excuted as per the direction of EIC.The structural calculation, wind load calculation and civil foundation shall be duly approved by the competent authority from civil wing (SE/CCE/Competant authority)before execution of the work. |
| 510 | Supply, Installation, Testing & Commissioning of of IP66 LED (50-60)w Post Top Fixture with Body made of Pressure Die Cast Aluminium Housing for Optimal thermal Conductivity. With UV Stabilized PC Compound Lens for Good Impact Resistance. High Efficiency Driver with necessary safety Protection against Short Circuit, Miswiring,Over Voltage and Surge Protection of upto 10kV ( 6kV Internal and 10kV External SPD of IP67). System Efficacy>100lpw. THD<10%.Submission of LM79,LM 80 report from State/central accredited NABL laboratory).CRI>=80, PF>.95. CCT - 5700/4000K.Impact Resistance IK07.Operating Voltage Between (140-270)V. Avg life of 50,000 Burning [email protected] the light fixture and the Driver Should be BIS Approved. Before final procurement, the final design shall be approved by the concerned client and Engineer-in-charge.The price inclussive of 3 meter long aesthetically designed decorative light pole with Cast Aluminium base and cast aluminium in middle of the Pole . Pole shall made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating and finished with black & gold embellishment. The pole shall be suitable for fitting of 50-60W decorative Heritage Light . Dimension of light must be Ø400mm dia and 800mm height. Body size of the pole will Ø88mm dia. The Pole shall have base Plate Ø230x12mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge.(Make: K -lite Pole KP-12011-300 + KL-5444 Luminaries / LT/panasonic/Havells /Philips/Wipro /Crompton/Bajaj). |
| 511 | Supply, Installation, Testing & Commissioning of of IP66 LED (50-60)w Post Top Fixture with Body made of Pressure Die Cast Aluminium Housing for Optimal thermal Conductivity. With UV Stabilized PC Compound Lens for Good Impact Resistance. High Efficiency Driver with necessary safety Protection against Short Circuit, Miswiring,Over Voltage and Surge Protection of upto 10kV ( 6kV Internal and 10kV External SPD of IP67). System Efficacy>100lpw. THD<10%.Submission of LM79,LM 80 report from State/central accredited NABL laboratory).CRI>=80, PF>.95. CCT - 5700/4000K.Impact Resistance IK07.Operating Voltage Between (140-270)V. Avg life of 50,000 Burning [email protected] the light fixture and the Driver Should be BIS Approved. Before final procurement, the final design shall be approved by the concerned client and Engineer-in-charge.Make-Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj/K-Lite.The price inclussive of of 4 meter long aesthetically designed decorative light pole with Cast Aluminium base and cast aluminium in middle of the Pole . Pole shall made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating and finished with black & gold embellishment. The pole shall be suitable for fitting of 50-60W decorative Heritage Light . Dimension of light must be Ø400mm dia and 800mm height. Body size of the pole will Ø88mm dia. The Pole shall have base Plate Ø230x12mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge.(Make: K -lite Pole KP-12011-400 + KL-5444 Luminaries/LT/panasonic/Havells /Philips/Wipro /Crompton/Bajaj). |
| 512 | Supplying, Erection, Fixing, connection & testing of 50W LED Heritage GATE Light, Dimension of light must be Ø400mm dia and 800mm height, IP 66, IK07, amb. temp -10 to 45 degree celcious, CT 3000-5700K,,50000 HRS, CRI 70, 120 Lm/W system efficacy,driver efficiency >/ 85%,dia case aliminium housing,Clear Acrylic diffuser of Make-K-LITE Model No - 25444/LT/panasonic/Havells /Philips/Wipro /Crompton/Bajaj as approved maintenance free having 2 years warranty G.I P ipe with braket including MCB box & including with foundation as per the Drawing for inspection as required & as per direction of Engg.-in-Charge. |
| 513 | Supply, Installation, Testing & Commissioning of of IP65 (16)w Bollard Fixture with Body made of Extruded Aluminium /Mild steel Pole & PDC Aluminium Housing for Optimal thermal Conductivity. With UV Stabilized Injection Moulded Diffuser for Soft and even light distribution. High Efficiency Driver with necessary safety Protection against Short Circuit, Miswiring,Over Voltage and Surge Protection of upto 10kV ( 4kV Internal and 10kV External SPD of IP67) THD<10%. CRI>70, PF>.95. CCT - 5700/4000/3000K.Impact Resistance IK05.Operating Voltage Between (100-275)V. Avg life of 50,000 Burning [email protected] the light fixture and the Driver Should be BIS Approved.Before final procurement, the final design shall be approved by the concerned client and Engineer-in-charge. Make-K-K -lite Bollard KL-25582/Philips/LT/PANASONIC/Havells/Bajaj/Crompton/Wipro |
| 514 | FOCUS LIGHT |
| 515 | Supply, Installation, Testing and Commissioning of 18W LED Focus Light having CCT 3000K +/-355K as per ANSI , CRI>80, SDCM<3. The fixture housing must be Made of extruded Aluminium housingfor better thermal healing & Powder coated by Corrosion resistant Nano coating technology. Luminaire must have minimum Ingress protection of IP66. The fixture should be equiped with stabilized Injection moulded special PC diffused optics ensuring low glare. The luminaire must have Integral high efficiency electronic thermally isolated constant current IP66 driver with operating voltage range of 90-205V, power factor > 0.95, THD < 10%, with Inbuilt surge protection of : 3kV and upgraded with integrated External IP67 protected SPD of 10KA surge protection .Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. CE Certified, ROHS compliant, BIS Certification for Luminaires & Drivers. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. Make: K -lite Nebula KL-22782/LT/Havells/panasonic/Philips/Wipro /Crompton/Bajaj). |
| 516 | Supply, Installation, Testing and Commissioning of 50W LED Focus Light having CCT 3000K +/-355K as per ANSI , CRI>80, SDCM<3. The fixture housing must be Made of extruded Aluminium housingfor better thermal healing & Powder coated by Corrosion resistant Nano coating technology. Luminaire must have minimum Ingress protection of IP66. The fixture should be equiped with stabilized Injection moulded special PC diffused optics ensuring low glare. The luminaire must have Integral high efficiency electronic thermally isolated constant current IP66 driver with operating voltage range of 90-205V, power factor > 0.95, THD < 10%, with Inbuilt surge protection of : 3kV and upgraded with integrated External IP67 protected SPD of 10KA surge protection .Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015. CE Certified, ROHS compliant, BIS Certification for Luminaires & Drivers. The lighting manufactor must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in- Charge. (Make: K -lite Navi KL-26805/LT/Havells/panasonic /Philips/Wipro /Crompton/Bajaj). |
| 517 | CABLING |
| 518 | Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE AL. conductor power cable of 1.1 KV grade POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster of following size cables as per direction of Engg.-in-Charge.Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 519 | 4core x 16 sq mm (OFP TO IND. TIMER PANEL) |
| 520 | 4 core x 4 sq mm (for small power/LIGHT TO POLE) |
| 521 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 522 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 25 SQ. MM but not exceeding 120 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 523 | Supplying and making end termination with brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 524 | Supplying and making end termination with 4 core x16 sq mm brass compression gland and aluminium lugs for following mentioned size cable.as per direction of Engg.-in-Charge. |
| 525 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. Make-POLYCAB/FINOLEX/HAVELLS/KEI/RR Kabel/Gloster |
| 526 | Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 527 | 50 mm dia |
| 528 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 63A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing MCB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 1 years of acceptance of materials |
| 529 | Highmast lighting |
| 530 | Supply,installation,testing and commissioning of 12M high mast shaft in two sections suitable for 55 m/sec wind speed along with head frame, luminaires carriage suitable for 6 luminaires in symmetrical arrangement and other accessories manufactured in factory. ( Bottom 360mm / Top -150mm, 3mm thickness, 445PCD, diameter of base plate 520mm including supplying of raising lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightning finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation)along with foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template along with Construction of shallow foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour.Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sq. mm, lugs, MCB and all labour . Provision of GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour. (2nos per mast required) Approved colour after treatment along with provision of masonary pedestal duly finished with plaster and painting with GI pipe for cable entering as required.. (2nos per mast required) (Make:-Bajaj/ Utkarsh/ Vakrangee/RR ISPAT/Valmont |
| 531 | SITC of 250W Outdoor Flood LED lights with silicon potted driver, IP66, , bottom opening maintanance , LPW not less than 130.Input Voltage: 85-265V AC ,Body : Die cast Aluminium, IP66 as per the Drawing for inspection as required & as per direction of Engg.-in-Charge. Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj as rerquired. |
| 532 | LED type single dome aviation obstruction light. (Make:-Bajaj/ Utkarsh/ Vakrangee/RR ISPAT |
| 533 | S/I/T&Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 63A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 63 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing MCB( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 1 years of acceptance of materials |
| 534 | Solar light |
| 535 | Supply of Elegant look 60 W AIO LED Solar Street lights having extruded alluminium housing, 180Wp or more (subjected to final panel backup calculation with dimming profile of 100% output for 2 hrs, 90% output for 1 hr, 60% output for 1 hr and 50% output for 8 hrs per day. The calculation is to approved by SE,Electrical Circle (R&B) and CE ,Buildings, Odisha, BBSR before final procurement of the product.) Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 78 Ah or more (subjected to final battery calculation with dimming profile of 100% output for 2 hrs, 90% output for 1 hr, 60% output for 1 hr and 50% output for 8 hrs per day. The calculation is to approved by SE,Electrical Circle (R&B) and CE ,Buildings, Odisha, BBSR before final procurement of the product.) LiFePO4 battery(BIS certified) , BMS, MPPT charge controller, PIR sensor( when there will be no movement the lumens output will be 30% output).The solar panel and battery should be designed to provide 2 days (24 hrs ) back up . The luminaire is having IP 65 protection for critical components, IK 08 and having lumen output of >=10000 lumens as per LM 79 report third party/central/state govt accredited NABL lab to justify the lumen output & lumen efficacy . Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party central/state govt accredited NABL lab reports to justify the lumen efficacy,luminaire output , IK 08 and IP 65 protection.The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole.The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary aftersales Service will be provided through their tollfree base service network located within 100 KM from the project site. The Solar Street light manufacturer should have own NABL accredieted laborotory. The following test reports must be submitted and approved from SE,Electrical Circle (R&B) and CE ,Buildings, Odisha, BBSR for the technical acceptance of the products.1.LM 79 REPORT and LM 80 Report ( from third party/central/state govt accredited NABL lab of AIO solar light) , 2. IK 08 ( from third party/central/state govt accredited NABL lab of AIO solar light ) , 3. IP 65 (Report of third party/central/state govt accredited NABL lab of AIO solar light 4. EN50530 – MPPT Efficiency , 5. IEC61547 , 6. IEC61000-3-2 – EMC , 7. IEC 60598-2-3 ,8. IEC 62109-1, ( The necessary test reports of third party/central/state govt accredited NABL lab from sl no. 4 to sl no.8 must be submitted for any wattage of AIO solar light )Make-(Philips/Panasonic/Wipro/Crompton/Bajaj/Havells/LT ). NB: The cost includes 5 years CMC including repair/ Maintenance/ replacement of the product in case of any defect. |
| 536 | Supply of 8 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 155 MM A/F of 4 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat/Vakarangee as per direction of Engg. in Charge. |
| 537 | Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge. |
| 538 | Installation of 60W AIO LED solar street light on 8 mtr octagonal pole. |
| 539 | ELV-CCTV ,PA SYSTEM |
| 540 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR Fixed Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell Value series/Pelco/Axis/Bosch |
| 541 | Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-Light IR motorized Lens Dome/Bullet Camera, 1/2.8\\" CMOS or better, 5MP (2592 x 1944) @ 25fps or better, four stream at various resolution & Frame Rates, Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart IR with upto 70m(bullet)/50m(dome) IR distance, Auto ICR (Infrared Cut Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000; Adavance Video Compression technology such as H.265 HEVC/ H.264 / MJPEG , Fixed Lens 2.7-13.5mm motorized, Field of View FoV H:100-28.5°, V:73-21.4°, BLC, HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing, Minimum Edge Intelligence Video Analytics : Video Motion Detection, Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS (EN63000),NDA,STQC compliant. Make-Honeywell value series/Pelco/Axis/Bosch |
| 542 | Supply , Installation, testing , commissioning of 64 Channel NVR with 8 SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels Resolution Display and Recording, H.265 video compression technology with real time encoding, Full function CMS (Central monitoring software) supported, Two way audio supported, Dual streaming technology to encode recording stream and network stream separately, Supports remote monitoring on Mobile Client (Android, IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date, Alarm, Motion Detection & Exact Search (accurate to second), Record Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/ Motion Detection/ Continuous, CE, FCC, RoHS). Make-Honeywell value series/ Pelco/ Axis/ Bosch |
| 543 | Supply, Installation,Testing & Commisioning of Surveliance 10 TB HDDMake:- WD/Segate/Toshiba |
| 544 | SITC of Certified HDMI® Interface Cable, 18 Gbps, 15 m Makes: Honeywell, Extron, Kramer |
| 545 | SITC of 55\\" UHD IPS Commercial Digital Display for Small Size Discussion & Chambers: Brightness (440 nits or higher), Dynamic Contrast Ratio (Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS 6.0), BIS Certification with 3 years onsite warrenty. Make: LG/Samsung/Sony |
| 546 | SITC of outdoor type double jacketed 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit |
| 547 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit |
| 548 | SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax, Legrand, Panduit |
| 549 | SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core . Make: Systimax, Legrand, Panduit |
| 550 | SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit |
| 551 | SITC of Cat6 UTP 23 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length) |
| 552 | SITC of Cat6 UTP 23 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit (2 mtr length) |
| 553 | SITC of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear |
| 554 | SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Systimax/ Legrand/ Panduit |
| 555 | SITC of OFC Patch Cor, SM (OS2), Duplex LC-SC, LC-LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db. Make: Systimax/ Legrand/ Panduit |
| 556 | SITC of 9U/500D outdoor type IP 55 Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/ Rittal/ Legrand |
| 557 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand |
| 558 | SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol, Cisco, HP |
| 559 | PA SYSTEM |
| 560 | Supply of 20 Watt outdoor Horn Speaker, IP65, Frequency Response : 150 Hz – 15 kHz, 4 INCH DRIVER, peak power handling capacity 80W, Should have Passive 350 Hz high-pass filter built-in, SPL : 133 dB peak @ 1.4 kHz, IP-65 rating per IEC529, Coverage Pattern: 60° horizontal by 80° vertical , Maximum SPL (1m): 109dB peak, 8 ohm Impedence, Transformer Taps: 70V/100V: 20W, 100V: 30 w.MAKE:Bose/EV/Audac(HS121)/Sonodyne |
| 561 | Supplying, installing, testing and commissioning of quad channel Power amplifier of continous power 4x 240 W @8 ohm and 100V, frequency response- 50Hz-20 kHz , class D amplifier.The amplifier should be clean reliable audio for public address amplification and music.Line input less than 1 volt, unbalanced& line output less than 1 volt unbalanced.Make-Bose/Audac(PMQ240)/EV/Sonodyne |
| 562 | Supply of 30 W weather proof rock speaker with LMT, IP65 , Transformer Taps: 70V/100V: 20W, 100V: 30 w Make-Sonodyne (RS 650)/Bose/EV/Audac |
| 563 | Supply of 10-Channel Mixing Console: Max. 4 Mic / 10 Line Inputs (2 mono + 1 stereo) / 4 GROUP Buses + 1 Stereo Bus / 4 AUX (incl. FX),16-Channel Mixing Console mic preamps with an inverted Darlington circuit,1-Knob compressors,High-grade effects: SPX with 24 programs,24-bit/192kHz 2in/2out USB Audio functions,Works with the iPad (2 or later) through the Apple iPad Camera Connection Kit / Lightning to USB Camera Adapter,Includes Cubase AI DAW software download version,PAD switch on mono inputs,+48V phantom power,XLR balanced outputs with provision for bluetooth.Make-Yamaha/Soundcraft/Studiomaster |
| 564 | SITC of 17U 600/650D UL Listed Floor mount Rack with Front perforated door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W - 375D and H/W screw920sets). Make: Valrack/ Rittal/ Legrand |
| 565 | Speaker Cable Armoured 2 core 2.5 sqmm PVC Sheathed etc complete as required. |
| 566 | Laying of cable (Digging , laying and refilling with sand and Bricks) |
| 567 | Installation of all equipment, testing and commissioning of the system |
| 568 | EV CHARGE STATION |
| 569 | EV CHARGER |
| 570 | SITC of 60 KW, 415 V AC,50 Hz, DC charger (Dual Gun) with DC O/P 200-1000 VDC, 200 A DC A as per IS17017 with 5 years of comperhensive warranty, guarantee, AMC and ARAI certificate.charging mode4:CCS2,Auto charge, IP54 or above, forced air cooled, outdoor type in complete as per the direction of Engineer-in-charge. The price is inclusive of 2 nos.GI earth plate 600mmx600mmx6mm thick ISI marked with G.I.nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required, 25x5 mm GI strip and 50x6 mm GI strip for each plate earthing as per site requirement.Make-TATA Power/Statiq/Verde-mobility/ElectriVa/Panasonic/Siemens/ABB/Schneider |
| 571 | SITC CMS (A cloud- based charging management service with Android/IOS application and CMS portal)For 5 year.Make-TATA Power/Statiq/Verde-mobility/ElectriVa/Panasonic/Siemens/ABB/Schneider |
| 572 | SITC of 160(125-160) A outdoor Sub panel with 2mm CRCA having 200A Cu. busbar 1nos 160 A ,4p mccb 25 ka adjustable thermal based release with Ics=100%Icu as Incomer & 200 A Cu. Bus bar as outgoing feeder as required as per direction of Engg.-in -charge. Type 2 40kA 3P+N SPD with 63A 4P MCB,C series,10kA shall be provided in the incomer.Make of MCCB-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider-CVS/ ABB FormulaMake of MCB-LEGRAND-DX3 / Siemens-Betaguard Model/ Schneider-Acti 9/ ABB SB200Make of SPD-Legrand/Siemens/Schneider/ABB/OBO/Dehn |
| 573 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade POLYCAB/HAVELLS/Finolex/kei/RR Kabel/Gloster ISI marked as approved of size 3.5core x 95 sq mm . |
| 574 | Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required. |
| 575 | Supervision and Commissioning of DC Charging Station. |
| 576 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type) with suitable size modular box & cover including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. (For bike charging) |
| 577 | TWO WHEELER CHARGING PANEL |
| 578 | S/I/T&Commissioning of LT OUTDOOR floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.3P+N Type 2 SPD 40 kA with 63A 4P MCB,10kA, Cseries shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed.Provision of cable alley chamber is mandatory.All the feeders shall have ON/OFF/TRIP indication. |
| 579 | In commer-1-01 number of 125A 4P Icu=100%Ics,25Ka MCCB with TMR based release ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula |
| 580 | Busbar-1&2 04 numbers of 200Amps Aluminium busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. (for outgoing) |
| 581 | Out going- 10 numbers of 40A 2P MCB10KA,C series ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200) |
| 582 | Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. |
| 583 | (ii) 01 set of digital type multifunction meter with CT for voltage,current,frequency,PF,THD indication |
| 584 | CASSETTE TYPE SPLIT UNITS(AV,COM HALL) |
| 585 | SITC of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU),Out door unit (ODU), R-32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50Hz, 1/3 phase AC supply. the system shall be capable of performing cooling, dehumidification, Air circulation, filtration & ventilation of following capacity with Scroll/ rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB) as specified. The system shall be able to deliver 100% of the rated capacity asper relevant IS Code. The lab testing reports as per IS: 1391shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electro technical Commission (IEC) 17025 standards/ Central Power Research Institute (CPRI)/ Electrical Research and Development Association (ERDA) with Original Equipment Manufacturer (OEM) etc. complete as per IS: 1391 as required. 5 Star Inverter Type- Cooling only (Category I Make :- LG/ O General/ Daikin/ Mitsubishi) |
| 586 | 4.0 TR with 5 Star BEE Rating (LG/ O General-AUGG48CRAA-B/ Daikin/ Mitsubishi) |
| 587 | AIR CONDITIONER SPLIT |
| 588 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . |
| 589 | 1.5 TR with 5 Star BEE Rating (LG-AS-Q20JWZE/ O General-ASGG18CGWA-B/ Daikin-FTKU50XV16) |
| 590 | 2.0 TR with 5 Star BEE Rating (O General-ASGG24CGWA-B/ Daikin-FTKM60XV16) |
| 591 | REFRIGRANT PIPING |
| 592 | Supply,installation of hard/soft ISI marked copper refrigerant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 593 | 1 TR to 3 TR high wall split A.C |
| 594 | Supply & Installation of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 25mm thick closed cell electrometric Nitrile rubber tubular insulation between each set of indoor & outdoor units . The pipe dia upto 25 shall be soft seamless & above 25mm dia shall be hard seamless . All piping inside the room shall be properly fixed/supported with suitable size of clamp/ M.S. hanger and all external piping shall run in GI. cable tray etc. as reqd. Make of insulation-K Flex/Armacell/Vidoflex/Eurobatex/Isoline Make of pipe-Rajco/Mandev/Maxflow (for 4 TR CASSETTE ac) |
| 595 | 9.5 mm with 0.8 mm thick |
| 596 | 15.9 mm with 1.00 mm thick |
| 597 | FRAME WORK |
| 598 | Supply,installation & fabrication of MS base frame for outdoor unit and other nesessary material to complete the job. |
| 599 | 1 TR to 3 TR high wall split A.C |
| 600 | DRAIN PIPING |
| 601 | Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job. |
| 602 | 25mm nom. Dia pipe |
| 603 | Supply and fixing of 4kVA Voltage stabilizer (Make-V-Guard/Microtek |
| 604 | Supply and fixing of 5kVA Voltage stabilizer (Make-V-Guard/Microtek |
| 605 | FIRE SAFETY EQUIPEMENT |
| 606 | Providing and fixing carbon-di-oxide type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS : 2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/Supremex/ Ceasefire/Flameklog/Kalpex .4.5 kg capacity |
| 607 | Providing and fixing ABC type fire extinguishers consisting of welded M.S cylindrical body, squeeze lever dischange valve fitted with pressure indicating gauge internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, conforming to IS finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make- Safex/Supremex/ Ceasefire/Flameklog/Kalpex .6 kg capacity |
| 608 | SIGNAGES: SITC of flexyl Photoluminescent based Glow-in-the-dark sheeting with luminious properties enclosed in a weather-proof UV stabilized film with UV screen printing by imported inks pasted over 3 mm Thick Cast Acrylic Sheet with the Protection of 3 mm Thick Cast Acrylic from Front side with stud type mirror screw with lifespan of 5 years, visible upto 4-6 hrs in total darkness for floor indication, fire exit, hydrant, hose reel, fire extinguisher, MCP, fire alarm panel, in case of fire, lift, alarm valve signages |
| 609 | Supply, installation, testing and commissioning of double sided visible LED illuminated Exit Indication Sign(300 mmx 150 mm, letter height minimum 150 mm) complete with directional arrow legend, rechargeable maintenance-free battery backup capable of providing continuous illumination for not less than 90 minutes upon mains failure, automatic charger circuit, fire-retardant ABS housing, polycarbonate diffuser, minimum letter height 150 mm, suitable for 230V AC supply, wall/ceiling mounting arrangement, complete with all accessories, wiring connections, testing and commissioning as required. The equipment shall comply with applicable requirements of NFPA 101, NFPA 70 and UL 924 standards.The Exit Indication Sign shall be a self-contained, LED-illuminated unit with integrated rechargeable battery backup, directional arrow (left, right, or straight), and automatic changeover circuitry. The sign shall operate in maintained mode (continuously illuminated) or non-maintained mode as specified, and shall automatically switch to battery power upon mains failure. The pictogram shall comply with ISO 7010 (E001 / E002 green running-man symbol) as mandated by NBC 2016 and IBC 2021. Make-Bajaj/Prolite |
| 610 | Supply, Transportation, erection, testing and commissioning of 3 Phase, 415V, 50Hz, water cooled multi cylinder diesel generator set with alternator of 82.5KVA ( Make -Kirloskar / Jakson/TMTL/Mahindra/Captiva/Sterling) out put contineous rating directly coupled Engine and Alternator with g 82.5uard and mounted on a common base plate of Robust construction and complete with AMF panel having IP-52 protection, Acoustic Enclosure as per CPCB IV+ norms , sound absorbing material, to restrict sound level up to 75 dB up to 1 mtr distance and as per CPCB IV+ norms etc as per following specifications mentioned below. Warrentee period must be 2 years ALTERNATOR:The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.ENGINE: Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 82.5KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 12 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.01. Exhaust pipe of required size and length with insulation or clading.02. Diesel tank suitable for 8 to 10 Hours running capacity.03. Residential Silencer.04. SMF Batteries with leads as per the Manufacturer standardsAMF PANEL: Cubical, Compartmentalized, AMF Panel Baord with all Power & Control Contractors, Switches, Meters and other accessories, Internal Wiring, connection, inter-connection etc. for Trouble Free smooth function for 82.5 KVA DG Set complete with Battery Charger & leads as required. BASE PLATE: Common Base Plate of required size for mounting of Engine Alternator Set fabricated from MS Channel and vibration damping arrangement with cushy foor mounting including paintng etc. as required. FOUNDATION: Suitable size Cement Concrete (1:2:4) foundation duly plastered and finished with neat coat Cement as required along with smoke exhaust system piping including base frame of structure & lightening protection system. , control cable of 15mtr 2.5sqmm 6core , civil foundation work. (The Manufacturing of DG set shall not in any case be more than six months old from the date of award of work) |
| 611 | LIGHTENING PROTECTION SYSTEM--- Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/ABB |
| 612 | Supply of Roof conductor holder for parapet- PolyamideConductor holder:With M8 female thread or diameter 7mm, M8Screw to connect the conductor holder.Weather andtemperature resistant from -35 to +90 degree Celsius tested.Conductor holder @ 1 meter distance.Tested as per IEC 62561. as per direction of engineer in charge.Make-OBO/Dehn/ABB |
| 613 | Supply of Polyamide roof cable holder for flat roof:DIN 48829 Form B1. Closed form with bottom. Filling weight1Kg (frost-resistant concrete). Sleeve from polyethylene, black@ 1 meter distance. Tested as per IEC 62561. Make-OBO/Dehn/ABB |
| 614 | Supply of Connector: For T cross and parallel connectors. Quickinstallation using hexagonal bolt M10X30 high-grade hot dipgalvanised. Tested as per IEC 62561.(2nos/expansion piece ).Make-OBO/Dehn/ABB |
| 615 | Supply of 1 mtr vertical air terminal with mounting accessorieson the flat surface to meet the requirements of IS/IEC 62305.Tested for Electrical , mechanical and chemical as per IEC62561. Tested for 100kA lightning current. Make-OBO/Dehn/ABB |
| 616 | Supply of Vertical air terminal with accessories:Providing of Air terminalsas per IS-IEC -62305 part-3Nominal size Ø10/16 mm aluminium rod:2 Mtr Airterminal: semi-hard (E-AlMgSiO5 corresponds to DIN48801) Suitable for high wind load.Tested as per IEC 62561. Make-OBO/Dehn/ABB |
| 617 | Supply for Providing of Stand for Fang Fix system 16 kg with base andclamp ,made up of frost resistant concrete and clamp testedupto 100KA lightning current . Make-OBO/Dehn/ABB |
| 618 | Supply for Providing of Stand for Fang Fix system 16 kg made up of frostresistant concrete. Make-OBO/Dehn/ABB |
| 619 | Supply of Test Joint (Folding Clamp) suitable to connect 8mmround conductor and max by 30x3 mm GI strip as specified indrawing and directed by Engineer.Tested for 100kA lightning current. Make-OBO/Dehn/ABB |
| 620 | Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr HeightFor Test Joint .Internal dimensions: 100x100x48 mm Make-OBO/Dehn/ABB |
| 621 | Supply of Galvanised Steel Flat 30X3 mm thickness from earthelectrode directly in ground as required. Flat conductor HotDipped Galvanized. Tested as per IEC 62561. Make-OBO/Dehn/ABB |
| 622 | Supply for Providing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kA lightning current. Make-OBO/Dehn/ABB |
| 623 | Supply of flat conductor holder- Fit: FL 30, With mounting hole6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece fromhot-dip galvanised steel, Bottom section from polyamide, black.Tested as per IEC 62561. Make-OBO/Dehn/ABB |
| 624 | Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. Make-OBO/Dehn/ABB |
| 625 | Supply of UL Listed maintenance free ,Low carbon coppercoated earth rod of 3 metre electrode having diameter of 17.2mm with copper coating thickness of 250micron tested as perIEC 62561-2 Make-OBO/Dehn/ABB |
| 626 | Supply of universal clamp made of SS to connect rod with flatconductor Make-OBO/Dehn/ABB |
| 627 | Supply of Earth conductivity enhancing mineral compound shall be of 25kg/pit tested as per IEC 62561-7,TCLP tested Make-OBO/Dehn/ABB |
| 628 | Supply of The above arrangements shall be provided with Heavy dutyearth champer of 5000kg load bearing capacity to ensure thesafety of earthing system Make-OBO/Dehn/ABB |
| 629 | Installation of The above arrangements including all accessories as per Direction of Engg. In charge. |
| 630 | AV ROOM DETAILS |
| 631 | SITC of 5200 ANSI Lumens, 3 LCD system Laser Projector with 16:10 Aspect Ratio, WUXGA (1920X1200 Pixels) Resolution. Contrast Ratio 3,000,00:1, Lens 1.6x manual zoom. With mounting bracket.Make: Panasonic model-PT-VMZ51S , Veiwsonic, Barco |
| 632 | SITC of imported allmost seamless join, screen size 12' X 18', microperforated fabric, completed aluminium frame screen with a velvet covered.Make: Suvira, Elite, Lumina |
| 633 | SITC of loudspeaker which provides a high quality high performance speaker system for behind the screen home theatre systems.The loudspeaker incorporates true point source technology and is a 2-Way passive loudspeaker containing a 1” exit compression driver assembled in a coaxial configuration along with a 12” LF driver providing a conical 90° opening. 12″ (308 mm) Low Frequency Driver and 1.5″ (38 mm) High Frequency Driver. High performance coaxial driver. 90° conical dispersion. High SPL. Smooth frequency response on and off axis. Frequency Response 65Hz to 20kHz. Power Rating 400W AES, 1600W peak. Sensitivity 98dB 1W/1m. Maximum SPL 124dB continuous, 130dB peak @1m. Finish: Black impact resistant structured coating. Make: Pulz,model-CX12SMP, Martin Audio, L-Acoustic |
| 634 | SITC of High power and high sensitivity 2 x 10” (250 mm) woofer. 100° vertical control Only 12” (300 mm) depth for in wall installation.It is designed to be an inwall or onwall subwoofer system where powerful low frequency extension and ease of integration is the prime criteria. Frequency Response 38Hz to 500Hz. Power Rating 500W AES, 2000W peak. Sensitivity 95.5dB @ 1W/1m. Maximum SPL 122dB continuous, 128dB peak @ 1m. Nominal Impedance 4Ω. Dispersion 180° horizontal, 100° vertical @ 400Hz. Transducers 2 x 10” (250 mm) long throw weather resistant woofer. Make: Pulz model- IW210, Martin Audio, L-Acoustic |
| 635 | SITC of 2-Way Cinema Surround Speaker System, designed to reproduce faithfully the wide dynamic range and extended frequency response to meet today’s immersive audio formats. Frequency Response 65Hz to 20kHz. Power Rating 100W AES, 400W peak. Sensitivity 93.5dB @ 1W/1m. Maximum SPL 113.5dB continuous, 119.5dB peak @ 1m. Nominal Impedance 8Ω. Low Frequency Driver 8″ (200 mm) Mid-Bass drive. High Frequency Driver 1” (25 mm) Dome tweeter. Crossover 2.5kHz Passive, low loss air core inductors and MKP capacitors. Finish Black impact resistant structured coating. Connector Push type binding post, cable upto 4 mm diameter.Make: Pulz model-ES8, Martin Audio, L-Acoustic |
| 636 | SITC of a 4 channel power amplifier specially designed for today’s competitive multiplex environments. The robust bipolar outputcircuit combines clean power with superb dynamics and can accurately drive a variety of speaker systems.Frequency response 30Hz - 20kHz, +0.2dB. Total Harmonic Distortion + Noise <0.01% 20Hz - 20kHz @ 8Ω. Inter modulation Distortion <0.03% SMPTE @ 8Ω. Signal to Noise Ratio -94 dBDamping factor >100 @ 8Ω. Cross-talk -90dB. Slew Rate >10V/µs. Input Sensitivity 1.4V (+4dB). Input Impedance 20kΩ, balanced. Voltage Gain 32dB. Bandwidth 100 kHz. Make: Pulz model-UL4500 , Martin Audio, L-Acoustic |
| 637 | SITC of Premium 7.2 Channel AV Receiver Powered by HEOS™ with Dolby Atmos, 100W, 8K and 6 HDMI Inputs,100 Watts per Channel,HEOS Built-in.Make: Dolby,model-Cinema60, Denon, Marantz |
| 638 | SITC of 2 core 4 sqmm speaker Cables. |
| 639 | SITC of 2 core 6 sqmm speaker Cables. |
| 640 | SITC of 20mtr HDMI cable |
| 641 | SITC of required connectors |
| 642 | SITC of 9U AV rack |
| 643 | SITC of Desktop with 27 inch monitor i7 12th generation 16 GB RAM,8 GB NVIDIA Graphics, 1 TB Hardisk, 512 GB SSD in complete as per the direction of Eng-in-charge.Make-Lenovo Think station(P360) / HP(Z1 Tower G9) |
| 644 | ON GRID SOLAR SOLAR PV SYSTEM |
| 645 | Supply Installation Testing and Commissioning of on grid Solar Photovoltaic Power Plant conforming to MNRE specifications as amended, consisting of Mono PERC HALF CUT bifacial Crystalline silicon solar cells, net metering facility ,necessary protections, earthing, mounted on hot dip GI structure( solar panel bottom height from roof level shall not be less than 300mm, accordingly GI structure to be designed) of suitable strength with following components a complete as arequired: a) Solar Photovoltaic Module of capacity 545Wp or above, manufactured in India, conforming to IS14286 / IEC61215, IS/IEC61730-Part-1,IS/IEC61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 22%. PV modules used in solar power plants /systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 400 V AC, three phase , 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to generate AC Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 degree Celcious. The PCU shall adjust the voltage and frequency level to suit the Grid Voltage,frequency. c) Data Monitoring System complete with accessories.d)Fixing of Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugsand other accessories etc. asarequired.e) Lightning and surge voltage protection. f) Connections & Interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kV grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/ conduit lugs and other accessories etc. asrequired. with all required accessories as required as per the direction of Engg-in-charge.Make-Tata/waree/luminous/adani/panasonic. The entire SOLAR system should be Replacement Warranty will be 5 years |
| 646 | FOUNTAIN ILLUMINATION |
| 647 | SITC of Nozzle (Complete set listed as below) : |
| 648 | Supply, installation, testing & commissioning of Floor Inlet Nozzle (ABS) Adjustable. MAKE-Ripples/ equivalent |
| 649 | Supply, installation, testing & commissioning of Floor Inlet Nozzle (ABS) Adjustable of Lights (Complete set listed as below) :Ripples/ equivalent |
| 650 | Supply, installation, testing & commissioning of N18W Submersible LED Light - Warm White 18W (6x3W LED's).MAKE-Ripples/ equivalent |
| 651 | Supply, installation, testing & commissioning of Niche for NL 18/06LN - Nylon. MAKE-Ripples/ equivalent |
| 652 | Supply, installation, testing & commissioning of Moulding Deck Box.MAKE-Ripples/ equivalent |
| 653 | Supply, installation, testing & commissioning of Power Supply - 12V DC/ 29 Amp.MAKE-Ripples/ equivalent |
| 654 | SITC of Pump (Complete set listed as below) : |
| 655 | Supply, installation, testing & commissioning of Pump 1 HP Dry, 3 Ph. Outlet 40mm ,120 LPM at 17m ,(Model-SMB-SS 30-136)- MAKE-SHAKTI/kirloskar/ CG |
| 656 | Supply, installation, testing & commissioning of Pump 3HP Dry, 3 Ph. Outlet 65mm ,510LPM at 21m ,(Model-SMB-SS 40-160)- MAKE-SHAKTI/kirloskar/ CG |
| 657 | Supply, installation, testing & commissioning of PP Basket Strainer Size 50mm (2\\" ) - Threaded |
| 658 | Supply, installation, testing & commissioning of PP Basket Strainer Size 65mm (2.5\\") - Threaded |
| 659 | Supply, installation, testing & commissioning of Anti Vibration Pad - Small ( With 25mm x 4 Soot Bolt ) |
| 660 | Supply, installation, testing & commissioning of Base Frame for Dry Pump MOC - MS (Medium).MAKE-Ripples/ equivalent |
| 661 | Supply, installation, testing & commissioning of Base Frame for Dry Pump MOC - MS (Small).MAKE-MAKE-Ripples/ equivalent |
| 662 | SITC of Filter and Chlorine Dosing with accessories (Complete set listed as below) : |
| 663 | Supply, installation, testing & commissioning of Sand/Bio Filter Dia 450 mm flow 8 m3/hr.-MAKE-Ripples/ equivalent |
| 664 | Supply, installation, testing & commissioning of Sand for Sand Filter (SIZE 16/32 Mesh -- 1 to 1.5mm Size ) |
| 665 | Supply, installation, testing & commissioning of Sand for Sand Filter (SIZE 4/16 Mesh -- 4 to 6mm Size ) |
| 666 | Supply, installation, testing & commissioning of Chlorine/ Bromine Dosing Unit (IN-LINE Feeder)- MAKE-Ripples/ equivalent |
| 667 | Supply, installation, testing & commissioning of Vacuum Point-ABS.MAKE-MAKE-MAKE-Ripples/ equivalent |
| 668 | Supply, installation, testing & commissioning of Connector with Puddle Flange.MAKE-MAKE-MAKE-Ripples/ equivalent |
| 669 | Supply, installation, testing & commissioning of Main Drain Cover 300x300mm (ABS White).MAKE-Ripples/ equivalent |
| 670 | SITC of Control Panel (Panel Equipment Make L&T, Heger, Elmex, Rishabh, FTC, Esbee, Salzer etc.)(Complete set listed as below) : |
| 671 | Supply, installation, testing & commissioning of Panel Body (Modular P2) with Amp Meter Volt Meter MCB's Push ButtonsIsolator Indicators etc.MAKE-Ripples/ equivalent |
| 672 | Supply, installation, testing & commissioning of Starter for 1HP Dry Mono Block Pump Three Phase with Contactor OverLoad Relay etc. MAKE-Ripples/ equivalent |
| 673 | Supply, installation, testing & commissioning of Starter for 3HP Dry Mono Block 3 Phase with ContactorO/L RelaySinglePhase Preventor etc.MAKE-Ripples/ equivalent |
| 674 | Supply, installation, testing & commissioning of Three Phase Panel Incomer with MCB's & Neutral Link (P1-P4).MAKE-Ripples/ equivalent |
| 675 | SITC of uPVC Pipes, fittings etc. of required sizes (Complete set listed as below) : |
| 676 | Supply, installation, testing & commissioning of uPVC Pipe OD 50 (10 Kg.). Make-Finolex/Prince/Supreme |
| 677 | Supply, installation, testing & commissioning of uPVC Pipe OD 75 (10 Kg.).Make-Finolex/Prince/Supreme |
| 678 | Supply, installation, testing & commissioning of uPVC Pipe OD 90 (10 Kg.).Make-Finolex/Prince/Supreme |
| 679 | SITC of NRV (Non Return Value), uPVC Ball Valve and Butterfly Valves (Complete set listed as below) : |
| 680 | Supply, installation, testing & commissioning ofuPVC Ball Valve 50mm OD Plain ( 1 1/2 NB Compact ) - Make-Prince / AVN /Dynamic |
| 681 | Supply, installation, testing & commissioning of Butterfly Valve 40mm CI Body - Flange Type (Make - Zoloto/equivalent) |
| 682 | Supply, installation, testing & commissioning of Butterfly Valve 50mm CI Body Flange - Type (Make - Zoloto/equivalent) |
| 683 | Supply, installation, testing & commissioning of Butterfly Valve 65mm CI Body Flange - Type (Make - Zoloto/equivalent) |
| 684 | Supply, installation, testing & commissioning of NRV - 40mm (Flap/Wafer Type - C.I.).Make- Sant / Kartar |
| 685 | Supply, installation, testing & commissioning of NRV - 65mm (Flap/Wafer Type - C.I.).Make- Sant / Kartar |
| 686 | Supply, installation, testing & commissioning of uPVC Tail Piece Plain 50mm OD ( 1 1/2 NB ).MAKE-Ripples/ equivalent |
| 687 | Supply, installation, testing & commissioning of uPVC Tail Piece Plain 63mm OD ( 2 NB ).MAKE-Ripples/ equivalent |
| 688 | Supply, installation, testing & commissioning of uPVC Tail Piece Plain 75mm OD ( 2 1/2 NB ).MAKE-Ripples/ equivalent |
| 689 | Supply, installation, testing & commissioning of PP Flange ( Cut Type ) Plain 50mm OD ( 1 1/2 NB ).MAKE-Ripples/ equivalent |
| 690 | Supply, installation, testing & commissioning of PP Flange ( Cut Type ) Plain 63mm OD ( 2 NB ).MAKE-Ripples/ equivalent |
| 691 | Supply, installation, testing & commissioning of PP Flange ( Cut Type ) Plain 75mm OD ( 2 1/2 NB ).MAKE-Ripples/ equivalent |
| 692 | Supply, installation, testing & commissioning of Gasket Rubber 2 1/2\\" ( For 2 1/2\\" CI Flange ).MAKE-Ripples/ equivalent |
| 693 | Supply, installation, testing & commissioning of Gasket Rubber 2\\" ( For 2\\" CI Flange ).MAKE-Ripples/ equivalent |
| 694 | Supply, installation, testing & commissioning ofGasket Rubber 3\\" ( For 3\\" CI Flange ).MAKE-Ripples/ equivalent |
| 695 | SITC of Wire / Cable of various sizes and uPVC Conduits, bends, fittings etc including necessary accessories (Complete set listed as below) : |
| 696 | Supply, installation, testing & commissioning ofWire 2.50 mm 3 Core Flat Submersible Cable (Make- Polycab/equivalent) |
| 697 | Supply, installation, testing & commissioning of Wire 1.50 mm 3 Core Cu Flexibable (Make- Polycab/equivalent) |
| 698 | Supply, installation, testing & commissioning ofWire 2.50 mm 2 Core Cu Flexibable (Make- Polycab/equivalent) |
| 699 | Supply, installation, testing & commissioning of PVC Conduit 20mm. Make-AKG/SETHIA |
| 700 | Supply, installation, testing & commissioning of PVC Conduit 25mm.Make-AKG/SETHIA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender