Tender For Balance Work For Auditorium Under (Capex) At Foa Wadura, Skuast-K.
Tender Value
72.91 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
6 days left
EMD
1.45 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work For Auditorium Under (Capex) At Foa Wadura, Skuast-K.
BOQ
| Sl. No. | Item Description |
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 3 | Providing and fixing wood work in frames of doors, windows and other frames, wrought framed and fixed in position including SS expansion fastners for brick / concrete work in (including cost of all material, leads, lifts and carriages etc upto site of work complete 2nd Class Kail Wood ) as per the directions of Consultant/as per the drawings enclosed |
| 4 | P/F 35 mm thick panelled door shutters (Ist class Kail Wood). with ornamentals Kail Wood pannels incl. necesary stainlless Steel Butt hinges/screws etc. Design of shutter and pannels as per the instructions of Engineer I/C complete in all respects. (First class kail wood) |
| 5 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix |
| 6 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 5.0 mm thick glass pane (weighing not less than 12.50 kg/sqm) |
| 7 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications . (Brass) |
| 8 | Modular door lock ss finish handle 10\\" with duaal locking system inside & outside (godrej) |
| 9 | Tower bolts 300mm (doors) |
| 10 | Handle 300mm (door) |
| 11 | Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete. Including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm |
| 12 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Crushed) |
| 13 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 14 | Providing and fixing Aluminium composite sheet cladding (Exterior Grade) in vertical/horizontal surface using 4mm thick sheet, the sheet shall be bent to shaped profile as required including perimeter extrusion base frame stiffeners 2.5mm to 3mm & expansion fastners and silicon sealent (dow coming 789) all backup arrangement required for installation including scaffolding required upto all floor levels complete. Alumimiun mill finish rectangular Vertical tube size 50x150x2mm having wt. 2.13kg/m & horizontal square tube size 50x50x2mm having weight 1.043 kg/m including 4mm thick aluminium foil thickness, backer rod, & the periphery of cladding pannel shall be sealed with weather silicone of Dow Corning/alker make, necessary screws & hardware iin all respect, ACP should match with the pattern already executed in building as per the direction of engineer charge |
| 15 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 16 | P/L of Stone soling 50mm to 90mm hand packed complete soling |
| 17 | P/L in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size) PCC below Foundation& rooms-Mudmat including carriage. |
| 18 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 19 | P/F of 12mm thick ISI marked Commercial Plywood in Ceiling, Partions, Walls etc including ceiling joist of budloo Wood of 75mmx 75mm , Framed in spacing of 3'-0\\" x 3'-0\\", inclusive of 2 coats of enamel paint and one coat underneath priming coat including knifing the surface with grey putty all complete as per the directions of Engineer Incharge. |
| 20 | Providing and fixing 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) on wood work in false ceiling, wall/wall partitions sawn and put up in position ( budloo wood Ceiling Joists of 50 mm x 65 mm in sections placed @ 600 mm C/C both ways or as required at site). including cost of necessary adhesive & cost of nails etc. all complete upto floor 5 level as per the directions of Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete).(For panelling /Ceilings/Soffits etc.) |
| 21 | Providing and fixing PVC false ceiling comprising high-quality, rigid polyvinyl chloride (PVC) panels of approved make, shade, and finish, with a minimum thickness of 8–10 mm, having tongue-and-groove interlocking arrangement. The ceiling shall be supported on a framework of GI/Aluminium sections consisting of main runners, cross members, perimeter channels, and hangers, duly suspended from the RCC slab/roof structure at required intervals using dash fasteners, anchor bolts, or ceiling cleats. The work includes cutting, sizing, and fixing of PVC panels in true line and level, ensuring proper alignment, uniform joints, and a smooth finished surface. All necessary accessories such as corner trims, edge beading, joining strips, screws, and fasteners shall be included. Provision for openings for light fixtures, fans, AC vents, and other services shall be made as required. The item shall be complete in all respects, including scaffolding, wastage, transportation, and labour, as per drawings, specifications, and direction of Engineer-in-charge. |
| 22 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch lockswith hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's anddrainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall beacceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire meshpanels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. |
| 23 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 24 | Woodwool fibril acoustical tiles in stage ceiling:P/F Fibril wood-wool black acoustical tiles of size 1200x600x25 mm, to be installed existing MS suspension grid. Which will comprise of NRC 0.80Approved make: Absound Overseas/Herra Design/Acoustic India. |
| 25 | Wood grained wooden perforated sound absorb slit paneling for rear wall, side walls & stage front:Providing and fixing Wood melamine finish MDF based panels with slit perforations of size 14x40mm to be fixed on walls.The panels shall be with melamine laminate finish of size 1220mm x 610mm x12mm thick having density of 750 to 800kg/m3. |
| 26 | Note:- The rates quoted are inclusive of all carriages of materials (Mechanical/Manual) from source to site work and all extra charges including dewatering if any during the execution of work till complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender