Tender For Permanent Restoration Works Damages Occurred During The Month Of August & Sepetember 2025 W.R.T. Varous Water Supply Schemes Of Sub-Division Kandi-Ii (Jandrah, Badsoo, Panjgrain, Marh & Jagti) Part-2 Under (Sasci 2026-27)1. Permanent Resto
Tender Value
1.08 Crore
Estimated cost
Bid Submission
14 Jul 2026
3 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Permanent Restoration Works Damages Occurred During The Month Of August & Sepetember 2025 W.R.T. Varous Water Supply Schemes Of Sub-Division Kandi-Ii (Jandrah, Badsoo, Panjgrain, Marh & Jagti) Part-2 Under (Sasci 2026-27)1. Permanent Restoration Of Water Supply Scheme Khanpur Nagrota By Means Of Wire Crates Damaged Due To Heavy Rain And Flood2. Providing, Laying And Fitting Of Gi And Hdpe Pipe For Distribution System At Baru Mohalla, Lambardaar Mohalla And New Colony Opposite Gafoor Panch Water Supply Scheme Khanpur Under Sasci3. Permanent Restoration Of Water Supply Scheme Khanpur Nagrota By Means Of Wire Crates Damaged Due To Heavy Rain And Flood4. Permanent Restoration Of Water Supply Scheme Khanpur( Nagrota) Damaged Due To Heavy Rain And Flood5. Permanent Restoration Of Rising Main From Dug Well To Old Gsr 10,000 Glns And New Dug Well To New Gsr And Distribution Line Damaged Due To Heavy Rain And Flood Under Water Supply Scheme Simble Lehar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kind of soil |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspitsand the like not exceeding 10 Sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50metres: All kinds of soil: |
| 3 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains,pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspitsand the like not exceeding 10 Sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposalofsurplusexcavatedearthasdirected,withinaleadof50metres: OrdinaryRock |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspitsand the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil: |
| 5 | Extra for every additional lift of 1.5m or part there of beyond 1.5m height for hand-packing of stones in wire-crates |
| 6 | Providing supply and carriage up to site of work of knitted wire crates 6.00 x1.20 x1.20 mtr |
| 7 | Providing supply and carriage up to site of work of knitted wire crates 6.00 x1.50 x1.50 mtr |
| 8 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 meters leadas per direction of Engineer-in-charge: Above 40 mm nominal bore (GI & HDPE) |
| 9 | Welding, including transportation of plant at site etc. complete. By electric plant |
| 10 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 50 to 80 mm nominal bore |
| 11 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 12 | Hand-packing stones in wire-crates; excluding cost o fcrates and stones |
| 13 | Dumping stone excluding cost of stones. In Horizontal on level |
| 14 | Supply of stone boulder (nallah) nominal size 225 mm |
| 15 | Providng and fixing G.I. Pipes complete with G.I. Fitting excluding trenching and refilling etc. (externalwork) 100mm dia(M) |
| 16 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 100 mm dia. nominal bore |
| 17 | Providng and fixing G.I. Pipes complete with G.I. Fitting excluding trenching and refilling etc. (externalwork) 80mm dia (Medium) |
| 18 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 80 mm dia. nominal bore with MS plate |
| 19 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 65 mm dia (L). nominal bore |
| 20 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 20 mm dia. nominal bore |
| 21 | Providing/Laying and fitting of HDPE pipes incl. cost of fittings & overheads but excluding cost of pipes, earth work in excavation, refilling & supply / fixing of Gate valves/Sluice Valves 40 mm dia |
| 22 | Providing/Laying and fitting of HDPE pipes incl. cost of fittings & overheads but excluding cost of pipes, earth work in excavation, refilling & supply / fixing of Gate valves/Sluice Valves 50 mm dia |
| 23 | Providing/Laying and fitting of HDPE pipes incl. cost of fittings & overheads but excluding cost of pipes, earth work in excavation, refilling & supply / fixing of Gate valves/Sluice Valves 63 mm dia |
| 24 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work, refilling.65mm dia GI pipe |
| 25 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work, refilling.80mm (medium) dia GI pipe |
| 26 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work, refilling.100mm (M) dia GI pipe |
| 27 | Providing and fixing gun metal non-return valve of approved quality (screwedend) 100mm dia |
| 28 | Providing and fixing C.I.sluice valves (with cap) complete with bolts, nuts, rubber insertion setc. (the tail pieces if required will be paid 100mm dia |
| 29 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 100mm dia & 80mm dia |
| 30 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 65mm dia |
| 31 | Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) 50mm dia |
| 32 | Filling available excavated earth (excluding rock) intrenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. |
| 33 | Making plinth protection 50mm thic kof cement concrete 1:3:6 (1 cement: 3coarses and: 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fines and including finishing the top smooth and curing complete |
| 34 | Grouting of stone pitching using M-10 nominal mix concrete (max.size of aggregates; 20mm nominal) @3.65Cum per 100Sqm onhorizontal/sides lopes; complete including curing. |
| 35 | Carriage of stone boulder from source (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance of Average 5km |
| 36 | Carriage of stone boulder from source (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance of Average 17km |
| 37 | Carriage of Pipes from source (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance of 1000Mtr by H/load (GI Pipe) |
| 38 | Carriage of Pipes from source (to be identified by Engineer in charge) to site of work including cost for loading , unloading & stacking for an av. distance of 1000Mtr by H/load (HDPE) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender