Tender For Divisional Forest Office-Kottiyoor Range-Costruction Of Container Check Post Building At Iritty In Kannur District
Tender Value
15.93 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
4 days left
EMD
39850
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Divisional Forest Office-Kottiyoor Range-Costruction Of Container Check Post Building At Iritty In Kannur District
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | OD307542/2025-2026Providing and Fixing Steel Container of size 24 feet length x 10 feet width- Raw Steel Sheets, Pressing/Forming Components, Assembly of Sub-assemblies/boxing/Total Welding Including wastage, Press shop Costs, Fabrication Costs, including consumables, Transport Cost, Unloading and Placing Container using Hydra Crane and manual labour on site etc. Completed |
| 3 | OD307538/2025-2026Providing and Fixing Insulation with Polystyrene Sheets to insulate to maintain ambient temperature with Steel Ribbing with L Profile angles to hold insulation material and cladding. etc Complete |
| 4 | OD307543/2025-2026Providing & fixing 4 mm thick ACP (Cladding Material) sheet as approved by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screws |
| 5 | 10.25.1Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 6 | 12.50Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 7 | 12.51.1Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete:Ridges plain (500-600 mm) |
| 8 | OD309203/2025-2026Providing pvc eve guttering of size 150 mm including iron clamp srew etc complete |
| 9 | 50.6.2.1Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 10 | 13.1.112 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 11 | 11.46.2Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm |
| 12 | 21.1.1.2Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading forglazing /paneling, C.P. brass/ stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge.(Glazing, paneling and dashfasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating50 micron) |
| 13 | 21.1.2.2For shutters of doors, windows & ventilators including providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50micron) |
| 14 | 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness |
| 15 | 21.2.2Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions ofEngineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides |
| 16 | 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm |
| 17 | 21.17 Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ). |
| 18 | 9.48.1Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding |
| 19 | OD31896/2025-2026 Manufacture and supply of Pressed steel door frame with shutter using frame section of 105 x 60 x 1.2 mm(18G) & 75 x 30 x 1mm for shutter section made out of Tata Galvano steel sheets and the inner panel fitted with 1mm embossed sheets welded and assembled with 100 x 2.0 mm SS butt hinges hold fasts, mortar guards, SS al-drops, SS Tower bolt and SS handles and finally applied with zin- chromate yellow primer/powder coating to your desired colour to the size. |
| 20 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 21 | OD307544/2025-2026Painting of Whole Container with - acid cleaning at boxed stage, then base coat withbituminous paint, priming with zinc chromate, top coated with Marine grade enamelpaint of approved brand and manufacture to give an even shade |
| 22 | 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid |
| 23 | 50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 24 | 17.7.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap |
| 25 | 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore |
| 26 | 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighting not less than 190 gms |
| 27 | 18.65 Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms. |
| 28 | 17.32.3 Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions) |
| 29 | 18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 30 | 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 31 | 51.19.ST2 Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 2. 15 to below 25 flush capacity |
| 32 | OD31897/2025-2026 Supplying and Erecting Cement Concrete circular precast ring of size 0.90m dia 0.90m depth and 0.05m thickness including the cost of carriage, trenching, placing at the level below ground leval as specified as per the direction of engineer in charge. For Soak pit Details of cost for 1 No of Soak pit size 0.90mdia*0.90m depth ( Precast ring 0.90m dia, 0.30m depth and 0.05m thickness - 3nos rings) |
| 33 | OD31892/2025-2026 Supplying and providing Work Stations with counters- Built in with key board pull out/CPU stand and 2 nos. low back revolving chairs etc complete. |
| 34 | OD31894/2025-2026 Providing and Fixing Rest room of 2 nos. wooden bed with shelves below. Mattresses and 2 pillows, Coat Hooks, & standalone wooden cupboard Translucent glass etc Complete. |
| 35 | OD307537/2025-2026Supplying Medium back chair with S type metal legs for Visitors |
| 36 | OD309371/2025-2026Supplying and Providing Overhead Cabinets and Bottom Shelf of size 120x45x45cmwith all fittings etc Complete. |
| 37 | OD309372/2025-2026Supplying and Providing Overhead Cabinets and Bottom Shelf of size 80x45x45cmwith all fittings etc Complete |
| 38 | OD309373/2025-2026Supplying and Providing Overhead Cabinets and Bottom Shelf of size 120x45x30cmwith all fittings etc Complete. |
| 39 | OD317238/2025-2026Supplying and Installation of Bottom Shelfs 60cmx45cmx45cm with all fittings etcComplete |
| 40 | OD317239/2025-2026Supply and Installation of dummy door beneath Stainless steel sink with all fittingsetc. complete |
| 41 | OD320840/2025-2026Granite Tabletop with cut out to install Stainless Steel Sink- 120 cm * 45cm etccomplete |
| 42 | OD320841/2025-2026lnternal Cubicle of 120 cm * 165 cm made out steel frame and insulated withPolystyrene and Cladded with Aluminium Composite Panel to demark Pantry |
| 43 | ELECTRICAL WORKS |
| 44 | 1.10.2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B |
| 45 | 1.27.1 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 46 | 1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 47 | 1.27.5 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) |
| 48 | 1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet |
| 49 | 1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch |
| 50 | 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 51 | 90.11.1.11Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43) |
| 52 | 2.13.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 53 | 2.15.2 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 54 | 2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 55 | 90.3.23.3 Supply & installation of fittings suspended on steel chain Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA sheet .5mm thick with all accessories and lamps etc. suspended from ceiling using 2 nos steel chain (16 SWG or nearest available size) of length not exceeding 30 cm properly hooked to steel hooks anchored to the ceiling and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200mm 1X20W LED Lamp with box type fixture |
| 56 | OD32659/2025-2026 Supply and fixing angle / straight brass lined modular Bakelite batten holder with 7 W LED lamp and giving connection etc as required |
| 57 | OD32651/2025-2026 Supply and fixing cast aluminium stove enameled elliptical shaped bulk head fitting with deep drawn anodized aluminium body, epoxy powder coated, heat resistant prismatic glass cover suitable with 7 W LED to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and making good the surface as required. |
| 58 | OD32649/2025-2026Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 200 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230V single phase A/C. |
| 59 | OD32655/2025-2026 SITC of wall mounting Split Air Conditioner unit of 1.5TR ratings performing to relevant IS suitable for operating on 230V,50Hz single phase AC supply, filled with refrigerant gas, high energy efficient RoHS compliant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc. of following capacity including refrigerant copper piping 3m with insulation, control cable up to 3m, 3m drain pipe, condenser stand, microprocessor control with cordless remote control etc. with one year warranty for machine and one year 3 Nos. free service. 1.5TR 1 phase 5 Star Split AC unit. (GENERAL ASGG18CGTA/equivalent reputed make having similar properties) |
| 60 | OD32657/2025-2026 SITC of wall mounting Split Air Conditioner unit of 1 TR ratings performing to relevant IS suitable for operating on 230V,50Hz single phase AC supply, filled with refrigerant gas, high energy efficient RoHS compliant capable of performing functions like cooling, dehumidifying, air circulating, filtering etc. of following capacity including refrigerant copper piping 3m with insulation, control cable up to 3m, 3m drain pipe, condenser stand, microprocessor control with cordless remotecontrol etc. with one year warranty for machine and one year 3 Nos. free service. 1TR 1 phase 5 Star Split AC unit. (GENERAL ASGG18CGTA/equivalent reputed make having similar properties) |
| 61 | OD32654/2025-2026 Supply of Providing 4 K VA Voltage stabilizer for split type A/C unit with Voltage of 175 -275V and out put range of 210-240V. (V Guard or equivalent reputed make having similar properties.) |
| 62 | OD32652/2025-2026Supply, conveyance, installation, testing and commissioning of the following sizes ofCabin-Overhead Fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 300 mm sweep Cabin-Overhead Fans in plastic body with self opening lowers working on 230V single phase A/C. |
| 63 | OD32650/2025-2026Supplying and fixing Network Cable Cat 6 including all materials and labour charges etc. |
| 64 | OD32653/2025-2026Supply and fixing of standard graded CAT 6 information Outlet (I/O) box in recess/surface with single port and Rj face plate having following minimum specifications :86 type standard, front access with spring shutter, easy identification labels or Rj 45 port etc. and Metal box concealed and giving connection properly with the incoming CAT 6 UTP cable, testing the connection, making good the damages, colour washing etc. |
| 65 | OD32656/2025-2026Supplying and fixing Patch Cord Cat6 1m including all materials and labour charges etc. |
| 66 | 1.18.2 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor,unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.2 Pair |
| 67 | 1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet |
| 68 | OD32658/2025-2026 Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board (GS-MB- 5628 (515x240x145) including providing and fixing 3Nos. 63 A HRC Fuse Base with HRC Fuse link ,63A neutral link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc. as required. |
| 69 | OD309501/2025-2026Supply, conveyance, installation, testing and commissioning of the Air Curtain,fixing necessary bolt and nuts, making good the damages etc. as required includinggiving connections with required length 16/0.20mm PVC insulated and PVCsheathed 3 core round copper conductor flex wire conforming to relevant ISS. WallMounted Commercial type Air Curtain (ALMONNARD BRAND) |
| 70 | OD321395/2025-2026Supplying and Providing Induction cooker of 2000-2100 Watts of approved make.(Prestige/Preethi/Phillips) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender