Tender For Repair To Compund Wall, Steel Gate, Foot Path, Hardstanding & Fencing In Otm Accn And Repair To Fencing/Gates And Misc B/R Works In Sector ‘B At Patiala Under Ge (South) Patiala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Jul 2026
5 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Compund Wall, Steel Gate, Foot Path, Hardstanding & Fencing In Otm Accn And Repair To Fencing/Gates And Misc B/R Works In Sector ‘B At Patiala Under Ge (South) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed. |
| 3 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed. |
| 4 | Demolition of Reinforced cement concrete of any description and RCC copings etc, in any position complete all as directed and removal of debris outside the defence land complete all as specified and directed. |
| 5 | Demolition of cement concrete of any description and in any position, louvres, jallies & framework etccomplete all as specified and directed. |
| 6 | M&L Brick work with sub class 'B' Fly ash bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all complete all as specified and directed. |
| 7 | M&L Brick work with old bricks retrived from dismantling straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 including cleaning of old bricks from existing cement mortar etc all complete all as specified and directed |
| 8 | M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately. |
| 9 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 10 | M&L for RCC (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate as in, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge. |
| 11 | Formwork of rough finished flat surfaces to sides and soffits of RCC/PCC copings/RCC/PCC bands in walls, horizontal or sloping, and similar work complete all as specified and directed. |
| 12 | S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding witgh and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 13 | S&F mild steel TMT bars 5mm dia and over upto and including 10mm diain stirrups, spacers and binders, cut to length, bent to shape required, including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 14 | M&L for 40mm thick Damp Proof Course (DPC) of PCC (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 15 | S&F 400 micron thick HDPE sheet (Virgin Quality) water proof, wrinkle free without puncture having minimum weight 390 gm/Sqm transparent/ white colour complete all as specified and directed. |
| 16 | M&L for precast cement concrete louvres and jallies, 40 mm thick (measured solid), (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate set in CM 1:4 including all mouldings but excluding frame complete all as specified and directed.Note: Pre cast frame shall be measured separately and paid for under respective item. |
| 17 | M&L for precast cement concrete as in frame work for louvres and jallies, 100x100mm and 760mm high, (1:2:4) type B-0 using 12.5mm graded mechanically crusted stone aggregate set in CM 1:4 including all mouldings complete all as specified and directed. |
| 18 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 19 | M&L for Granite (Jet Black colour/shade-South Indian) of any type machine cut as in flooring shelves/steps/counter tops/gate pillars etc, 18-20 mm thick, set and jointed in cement slurry over & including screed bed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed .Note : Single piece should be used in steps/cills/jambs/shelves/gate pillars. |
| 20 | M&L for preparation of surfaces of external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc and applying two coat of cement base paint with highlighter of any approved shade @ 5 sq.m/kg/1 coat or as recommended by the manufacturer of cement based paint by using following brands of cement based paint using brush or roller complete all as specified and directed by Engineer-in-Charge. |
| 21 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in PCC/RCC of any size/description including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 22 | Dismantling old fencing wire/barbed wire of any description/size as in fencing from posts/struts/pillars complete all as specified and directed. |
| 23 | Taking down existing steel gates of area of each leaf exc 5 sq.m but n. exc. 10 sq.m with hold fasts as directed and refixing in the new position including making holes for hold fasts in RCC/brick work and filling the same with PCC 1:2:4 after fixing the holdfasts including minor repair/welding etc complete all as specified and directed. |
| 24 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in soft/loose soil, getting out including removal for surplus/ excavated soil to a distance n.exc. 50 mtrs complete all as specified and directed |
| 25 | M&L for PCC 1:3:6 C1 using using 20mm graded stone aggregates as in post holes etc complete all as specified and directed. |
| 26 | S&F Mild steel work of Fe-290 Gde E-165 as in (Security fencing) fencing posts , drilling holes, notching for wire etc inl. Cutting and twisting necessary drilling, bolting and riveting or welding etc and similar works complete all as specified and directed |
| 27 | M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including bending hooks/ens as directed by Engineer incharge or welding for overlaps as in ties for fencing etc, confirming to FE-410 W (Grade E-250) quality 'A' or Fe -290 (grade E-165) complete all as specified and as directed. |
| 28 | Supply only chain link MS galvanised fencing square mesh of size/nominal pitch of wires 100x100mm, dia of wire-4mm complete all as specified and directed. |
| 29 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 30 | Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and string and fixing to mild steel fencing posts any type of standard rails, straining bolts including securing or tying at cross wings with and provision of galvanized mild steel wire staples or steel wire pins complete all as specified and directed |
| 31 | Restraining resecuring including making good staples etc of galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of posts, straining bolts,standard bolt, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins, etc complete all as specified and directed.Note: Each line of wire to be measured for the purpose of payment. |
| 32 | M&L for preparation of wood and wood based material, steel and iron work of any description for treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m each, and treated with tar or coal or black paint complete all as specified and as directed. |
| 33 | M&L for preparing steel and iron surfaces of any description including purlins/ rafters/ trusses/ columns/ struts etc and the like works n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 34 | M&L for mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5 cm long, dia of shank 12mm complete all as specified and directed |
| 35 | Dismantling plain or corrugated roof sheeting, any gauge, thickness/material, including nainital or similar pattern as on roof coverings complete all as specified and directed. Please Enable Macros to View BoQ information |
| 36 | Dismantling plain or corrugated roof sheeting, any gauge, thickness/material, including nainital or similar pattern as on roof coverings complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender