Tender For Provialon Of Street Lghting Arrangement At Varlous Places (Ekana Stadium Pollce Head Qutor, Cms Gomti Nagar Vitar Service Connecting Road At Gomtl Nagar Vistar In Zone-04 (Lst Phase)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
8 days left
EMD
10.88 Lakhs
Bank guarantee accepted
Document Fee
25699
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provialon Of Street Lghting Arrangement At Varlous Places (Ekana Stadium Pollce Head Qutor, Cms Gomti Nagar Vitar Service Connecting Road At Gomtl Nagar Vistar In Zone-04 (Lst Phase)
BOQ
| Sl. No. | Item Description |
| 1 | Supply and fixing of 12.50 mtr. High mast shaft of approved make with rising system hot dip galvanized inside & out dip, heaving pole sheet thickness 3mm. Top dia minimum 150 mm, bottom dia minímum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope ómm dia, double drum winch. including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect.t. |
| 2 | Supply and fixing of 16 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 4mm. Top dia minimum 150 mm, bottorm dia minimum 360mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope6mm dia, doubl drum winch. including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect. |
| 3 | Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. |
| 4 | Supply and fixing of 9 mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 155 mm & Base plate 16 mm thick) having 3 mm, thickness with single arm bracket length of l mtr. length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T & P complete in all respect. |
| 5 | Supply and fixing of factory wired intcgral LED. Flood light Iuminaires with dic cast aluminium housing wih toughend glassUV stabilized PC Cover and lenses built with mandatoy driver setsuitable for 170 to 200 Watt. Confirning io IP 66, IK 07 and above protection complete in all respect including Labour 20400-24000.system, lumens, High power LED with lenses, >120, Lm/W, P.F.>0.95, THD |
| 6 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 75 Watt. to 90 Watt.Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved including Labour.(Fixing with 40-50mm dia -5mm thick MS Pipe Bracket, 02No 135x10-15mmx5mm Clamp for Suitable size for pole of difference size, with 5Meter 2.5mm 02Core Alu Cable, 5Meter 40/76wire, 05Amp Bed Switch & Male-Female connector complete in all respect 9000-10800 system lumens, High Power LED with lenses, >120Lm/W, PF>0,95, THD <10% at full load CRI > 70..Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and restart feature, 4KV internal Surge Protection, with 5 years warrantee |
| 7 | Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass UV stabilized PC Cover and lenses suitable for 110 Watt. to 130 Watt.Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved including Labour. (Fixing with 40-50mm dia -5mm thick MS Pipe Bracket, 02No 135x10-15mmx5mm Clamp for Suitable size for pole of difference size, with 5Meter 2.5mm 02Core Alu Cable, 5Meter 40/76wire, 05Amp Bed Switch & Male-Female connector complete in all respect 13200-15600 system lumens, High Power LED with lenses, >120Lm/W, PF>0,95, THD <10% at full load CRI > 70..Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and restart feature, 4KV internal Surge Protection, with 5 years warrantee |
| 8 | S/L of Alu conductor PVC insulated armoured served sheathed cable 1100 V grade at depth of 750mm below ground level over a cushionof 75mm thick & arround and protected with burnt bricks on, Protected with burnt bricks on side and on top on surface., The cable run shall be fixed on M. S. Clamps etc.of suitable size or as per direction of E/I. comp. in all resp. The Armouring of the cable, shall be properly connected with the earth conductor by clamps etc. |
| 9 | (a) 16 sq. mm 4 core |
| 10 | (b) 35 sq. mm 3-1/2 core |
| 11 | (c) 50 sq. mm 3-1/2 core |
| 12 | Supply and fixing of 95 sq. mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge |
| 13 | (a) 16 sq. |
| 14 | (b) 35 sq. |
| 15 | (c) 50 sq. |
| 16 | S/L of \\"2” PVC/HDPE pipe (LNN Sec rate) |
| 17 | Boaring (Buggi) for Cabling work below 3.5mt ground level including HDPE Pipe (LNN Sec rate) |
| 18 | Provision of road cutting & repairing the same. |
| 19 | Supply and burring of safe Earthing electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm inner pipe 25, terminal Dia 12 mm, outer GI Pipe of 16 swg and inner GI Pipe of 12 swg with hot Dip Galvanization up to 100 micron filled with crystalline conductive Mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I frame with hinged Cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I strip will be extra) |
| 20 | Supply of Installation, Testing & Commissioning of Single Phase Micro processor, 4G Gatway SIM based CCMS with SPD streetlinght Control Panel, Auto/manual Rotary, Power Controller, Load brak switch, MCB, Antina, Timer with Pole mounting clamps, Connection cable, Software Charges, Installation accessories with Earthing, Communication Charges, Weblink in Smart city Lucknow Control Room with 1 Year Warranty & AMC |
| 21 | S/F 40Amp. TPN automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO-100 series with contractors HRC fuses isolating switch metering instrument & instrument box with CTS etc. in case of TPN, complete in all respect. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender