Tender For Procurement And Installation Of Agitator Sets Along With Allied Works At Crmb Plant At Haldia Refinery Terminal Under West Bengal State Office
Tender Value
63.58 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
4 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur East → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Procurement And Installation Of Agitator Sets Along With Allied Works At Crmb Plant At Haldia Refinery Terminal Under West Bengal State Office
BOQ
| Sl. No. | Item Description |
| 1 | Design, Drawing, Manufacturing, Supplying, Transporting, Installing, Testing and Commissioning of agitator set including agitator, gear and motor sets at CRMB plant at Haldia near IOCL Haldia Refinery Terminal |
| 2 | Design, Drawing, Manufacturing, Supplying and Transporting of agitator set including agitator, gear and motor sets at CRMB plant at Haldia near IOCL Haldia Refinery Terminal |
| 3 | Designing, supplying, fabricating, welding, bolting, riveting, assembling and erecting in position 8.0 M high Fire Screen Wall around the tank with GI sheets with cross supports, etc (temporary required local) as per alignment shown by site Engineer, maintaining same till the completion of entire work and dismantling the entire screen wall, carting away the dismantled materials from site, redoing the entire existing surface to the original condition, etc complete.The 8M high Fire Screen Wall including the foundation is to be designed and approved by a ''Licensed Structural Engineer'' and should be suitable for local soil bearing capacity, wind speed, etc. |
| 4 | Fire screen :Providing and laying in position approved quality profiled, pre-coated coloured galvanized steel sheets of minimum 0.45mm thickness (TCT) in barricading, including cost of all materials, delivery to site, cutting, metering, lapping, providing cut-outs for fixing accessories and necessary approved quality corrosion proof fasteners with neoprene capping and washers ridges, valleys, gutters, gutters of required shape, apron pieces, flashing etc. all complete and with all accessories required for the cladding works including necessary structural scaffolding for erection jobs as specified and directed.NOTE: (1) Contractor shall take back the cladding sheets (used in barricading structure) after completion of the job and on the instructions of Engineer-in-Charge. (Cost of dismantling and Carriage till contractor's store (outside the IOCL premises) is included in this item and no extra payment shall be paid to the contractor on this account). (2) Payment against the job on SQM basis shall be made to the Contractor while erection of the cladding sheets(3) The cladding sheets shall be dismantled and taken outside the premises by the Contractor within 30 days of instructions from E-i-C. (4) In case the Contractor fails to dismantle and shift the cladding material outside the IOCL premises within 30 days of clear instructions from E-i-C, the Owner shall be free to get the same dismantled and shift to Owner's scrap yard using Owner's resources and in such case the dismantled items shall not be returned to the Contractor and the ownership of the same shall be fully vested with the Owner |
| 5 | Supplying, providing of safe tubular double stage (box type) Scaffolding outside the tank as per specification & satisfaction of location in charge. After use, the same shall be dismantled and taken away by the contractor. Payments shall be made for actual area of scaffolding provided based on requirement. Area of scaffolding will be measured on the basis of actual height of scaffolding provided multiplied by actual average length of scaffolding provided. |
| 6 | Excavating Trenches of required width for pipes, cables, etc including excavation for sockets & dressing of sides, ramming of bottoms, depth upto 1.5m including getting out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place IN ALL KIND OF SOILS - Pipes, Cable etc. > 80mm < 300m dia |
| 7 | Providing earthing with 100 mm dia, 3.8M long C.I/GI pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drawing all complete as per specification & direction of Engineer In-charge |
| 8 | Boxing up the manhole cover of the tank including supplying and fixing 3mm thick non metallic type CAF- 9 gaskets of approved make as per IS 2712- 1979 with steel fasteners as per IS 1367- 1967 and washers of approved quality. |
| 9 | Supplying, transporting, fabricating, erecting Structural Steel work from rolled sections and built-up sections like flats, tees, angles, channels, plates, pipes, etc for various structural elements as required . Preparation of drawing, design & specification shall be arranged by contractor at his own cost as per guidance of IOCL. Item also includes painting of structural surface as per the standard painting scheme: |
| 10 | SUPPLY OF GI PIPE: IS-1239 Gr. C Heavy Duty ; 150 mm dia |
| 11 | Laying and welding (min 3 runs) of AG & UG Pipeline (GI IS-1239 Gr-C / MS IS -1239 Gr-C pipes) for pneumatic / service water / DG Set & Fire Pump Fuel Piping Systems following sizes of pipes at all places inside the IOCL Location ; 150 mm dia |
| 12 | CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items - 3.5 Core x 35 sq. mm Aluminium Cable FRLS |
| 13 | FASD STARTER Supply & Fixing of 3 phase,415V, 50HZ FASD(fully automatic star delta) starter with illuminated ON-OFF push buttons(LED type) having suitably rated thermal overload relay and single phasing preventer with auxillary contactors of approved make of 20 HP capacity |
| 14 | Supply, installation, testing & Commissioning of wall mounted switchboard in sheet enclosure consisting of 110 A, 4P, 50 kA, Contactor, 230V AC trip coil, START / STOP Push button, ON / OFF Indication lamp(LED), Auxiliary contactors, Power & Control Terminals. |
| 15 | Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete ; 32 X 6 GI Strip |
| 16 | DISMANTLING Dismantling of following electrical fittings / fixtures with all leads and lifts ; Power pump above 5 HP up to 25 HP |
| 17 | Dismantling of agitator units including labour and machiner as per direction of EIC ; Rate has been taken from similar item of HO SOR No. MPLMN09000 with description \\"Dismantling of existing Unipole including machinery and labour in all complete and as per direction of Engineer-in-charge\\" |
| 18 | Dismantling of old steam tracing arrangement from productpipeline & piping including steam tracing, insulation, cladding from 100 mm dia pipes |
| 19 | Supply, fabrication, erection, testing andcommissioning of Thermal insulation,outer layer vapour/moisture barrier and Aluminium cladding for the following items. The insulationmaterial shall be light resin bonded mattresses (LRB) with desnsity of min. 144 kg/Cum. The Aluminium material shall be industrial grade. Forpipelines of size 100mm dia. and below shall be provided with 24 gauge Al cladding. For all other purpose the Aluminium cladding shall be of 22 gauge ; Pipe 100 mm dia, Insulation thickness 70 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender