Tender For Supply, Carriage & Erection Of 33 Kv Line Amaon Distt. Fatehpur
Tender Value
1.19 Crore
Estimated cost
Bid Submission
17 Jul 2026
8 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fatehpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply, Carriage & Erection Of 33 Kv Line Amaon Distt. Fatehpur
BOQ
| Sl. No. | Item Description |
| 1 | Name of Work: Supply, Carriage & Erection of 33 KV Line Amaon Distt. Fatehpur |
| 2 | Supply of De-Centralised Materials |
| 3 | 33 KV Cross arm holding clamps with N&B |
| 4 | Cable jointing kit for 3x300 XLPE 33 KV |
| 5 | F-BRACKET |
| 6 | NUT BOLT WITH WASHER OFF SIZE |
| 7 | G.I.PIPE 6\\" DIA |
| 8 | HDPE PIPE 6\\" DIA |
| 9 | P.G. CLAMP FOR DOG TO DOG CONDUCTOR |
| 10 | 33 KV BRACING CLAMP WITH NUT & BOLT |
| 11 | TOP CHANNEL CLAMP FOR 11/13 MTR. ST POLE and 9 Mtr. PCC Pole |
| 12 | DANGER BOARD WITH CLAMP FOR 33 KV LINE |
| 13 | BARBED WIRE |
| 14 | Aluminium Paint |
| 15 | Red oxide Paint |
| 16 | Carriage of following material |
| 17 | PCC/STP Pole, 33 KV V-type cross arm, 33 KV M.S Top channel, 33 KV Disc Fitting, 33 KV Disc Insulator, 33 KV Pin Insulator, 3x300 sqmm 33 KV XLPE Cable, ACSR Dog Cond. 33 KV Cable jointing kit 3x300 sqmm, 33 KV Bracing clamp, 33 KV P.G Clamp etc. |
| 18 | Erection work |
| 19 | Digging of pits of size 0.45x1.25x 1.50 mtr. for erection of PCC Pole 9 Mtr. Long. |
| 20 | Digging of pits of size 0.45x1.25x 1.80 mtr. for erection of PCC pole 11 mtr. Long. |
| 21 | Digging of pits of size 0.45x1.25x 2.10 mtr. for erection of STP pole 13 mtr. Long. |
| 22 | Erection of single STP 11/13 mtr long and /PCC pole 9/11 Mtr. Long SP/DP/TP/FP. |
| 23 | Mounting and fitting of V-type cross arm, 33 KV pin, pin insulator, earth clamp complete in all respect as per drawing of RESPO on single STP pole 11/13 mtr long. |
| 24 | Mounting and fitting T-off Channel with clamp |
| 25 | Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp, 33 KV pin & pin insulators, disc insulator and disc fitting on STP/PCC . double pole. |
| 26 | Fabrication, mounting and fitting of M.S Channel ,33 KV disc insulator and disc fitting on STP . double pole for riser |
| 27 | Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp, 33 KV pin & pin insulators, disc insulator and disc fitting on STP . Tri pole. |
| 28 | Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp, 33 KV pin & pin insulators, disc insulator and disc fitting on STP . Four pole. |
| 29 | Painting of single STP pole 11/13 mtr long . |
| 30 | Grouting of PCC Pole 9 Mtr. with cement, sand and brick bllast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6. Cement, sand, brick, ballast shall be provided by the contractor. |
| 31 | Grouting of ST pole 11/13 Mtr. Long/PCC Pole 11 Mtr. with cement, sand and brick bllast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6. Cement, sand, brick, ballast shall be provided by the contractor. |
| 32 | Digging of pits of size 0.60x 0.60x1.2 mtr and grouting the stay rod anchor plates 0.45x 0.45x 0.45 mtr with cement, Ganga sand and brick ballast ratio 1:4:8 as per drawing No. RES-16. Cement, sand, brick, ballast shall be provided by the contractor. |
| 33 | Complete fitting of stay rod and fastening stay wire including fitting of stay clamp, turn buckle, and making ring of stay wire on both ends in seven strands 9” to 12” long. all material provided by the contractor. |
| 34 | Earthing of single STP pole/PCC Pole by digging 1.00 mtr deep pit and driving the electrodes of MS earth rod and connecting all the metallic parts of poles with earthing rod by G.I. wire and filling pits with soil after completion of earthing.earth wire/all materials shall be provided by the Contractor |
| 35 | Laying of A.C.S.R. Dog conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of A.C.S.R. Dog conductor against rubbing on ground, precaution for safety of crops is also to be taken. The work includes jointing of Conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. All material shall be provided by Contractor such as jointing sleeve binding wire, armour rod etc. |
| 36 | Hanging of 3x300 Sqmm 33 KV XLPE Cable for Loop & Air All Materials Provided by the Contractor. |
| 37 | Laying 3x300 Sqmm 33 KV XLPE Cable in HDPE Pipe Road Crossing All material shall be provided by Contractor. |
| 38 | Laying 3x300 Sqmm 33 KV XLPE Cable for 33 KV Line Sand & Bricks |
| 39 | Installation and Fixing of 33 KV Cable Box Jointing Kit 3x300 Sqmm |
| 40 | Guarding of 33 KV Line for Road Crossing and Marcket. |
| 41 | Trimming of tree branch big/small branch which is laying in alignment of 33 KV line. |
| 42 | Jumpring of 33 KV line on 33 KV Bay using P.G. Clamp dog to dog & dog to Panther & binding of jumper and other accessories on terminal gantry All material shall be provided by Contractor |
| 43 | Name of Work: Supply, Carriage & Erection of 33/11 KV S/S Amaon (2x5 MVA) Distt. Fatehpur |
| 44 | Supply of De-Centralised Materials |
| 45 | Control cable Armored 4x2.5 mm2 |
| 46 | Control cable Armored 2x2.5 mm2 |
| 47 | 11 kv Cable Jointing kit 120 mm.sq. |
| 48 | 11 kv Cable Jointing kit 300 mm.sq. |
| 49 | LT PVC Armoured Al. Cable (4x24 sqmm) |
| 50 | Rabber Matting |
| 51 | Earth Wire Clamp for PCC Pole |
| 52 | Stay Clamp for PCC Pole |
| 53 | Top channel Clamp for PCC Pole |
| 54 | Dropper channel Clamp for PCC Pole |
| 55 | G.I. Strips of size 35x6 mm |
| 56 | G.I. Strips of size 50x6 mm |
| 57 | G.I. Pipe 2\\" dia |
| 58 | PG Clamp for dog conductor |
| 59 | T&P Instruments for s/s (Meggar plire hand gloves etc.) |
| 60 | Table (Wooden) |
| 61 | Chair (Wooden) |
| 62 | Street Light shed flat |
| 63 | Carriage of following material |
| 64 | PCC Pole 9 Mtr. Long, Structure of LA, 33kv BusIsolator Structure, 33kv Lline Isolator Structure, 33 KV CTs, Single T/F Control Pannel, 33kv VCB, Battery & Battery Charger. and other associated accessiories etc. |
| 65 | Erection work |
| 66 | Laying of Earth Mat (Outdoor) as per Resp. |
| 67 | Laying of Earth Mat (Indoor) as per Resp. |
| 68 | Construction of Terminal Gantry and Bus Bar Gantry as per resp. |
| 69 | Construction of complete T/F plinth size 3mx3m x1.05 Mtr. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) Top of plinth is to be C.C. work in the ratio of 1:3:6 fitted with 3 Mtr. long, 90 lbs, 2Nos. rail pieces. Cement mortar is to be used in 1:3 ratio. Cement, concrete material, bricks used in plinth shall be supplied by the contractor. 6” stone grit is to be laid before foundation start for whole plinth. Except rail pieces all material shall be provided by the contractor . |
| 70 | Erection of complete structure and 33 KV Bus Isolator & Line Isolator in switch yard as per RESPO drawing. Work also includes construction of plinth of size 0.45x0.45x1.05 cum (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. All concreting material like cement, ballast, sand labour & T&P etc.shall be provided by the contractor. |
| 71 | Erection of complete structure and 33 KV lightening arrestor in switch yard as per RESPO drawing. Work includes erection of 3 Nos.33 KV lightening arrestor, its fitting and mounting with care. Grouting of structure with cement, coarse sand and ballast in ratio 1:3:6, construction of plinth size 0.45x 0.45x1.05 cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) Plastering the plinth with cement mortar with cement and sand in ratio 1:4. All concreting material like cement, ballast, sand labour & T&P etc.shall be provided by the contractor. |
| 72 | Erection of 33 KV post Insulators with complete structure in Switch yard as per RESPO drawing. Work includes Installation of 1X3 Nos. 33 KV Post Insulator on structure complete as per schedule, grouting of Structure with Ist class brick ballast in the ratio of 1:3:6, plastering in the ratio of 1:3 on plinth size 0.45x0.45x1.05 Cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) The work is to be done strictly as per RESPO drawing. All the material like post Insulator cap, Cement, concrete material used for above work will be provided by the Contractor. |
| 73 | Erection of complete 33 KV VCB with structure 0.7x0.7x1.05 cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation or made as per requirement.) in switchyard and grouting of VCB structure by cement, sand, brick ballast mortar in ratio 1:3:4. Work includes complete fitting of VCB on structure carefully with making all connections of control cable for operating the VCB . All other item like cement, concrete material, T&P shall be provided by the contractor. |
| 74 | Erection of complete 33 KV C.T (03 NO) with structure (0.45x0.45x1.05) cum. (0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing.) in switchyard and grouting of C.T. structure by cement, sand, brick ballast mortar in ratio 1:3:4. Work includes complete fitting of C.T. on structure carefully with making all connections of control cable . All other item like cement, concrete material, T&P shall be provided by the contractor. |
| 75 | Installation of 33 KV single transformer control pannel, 2 No. Incoming 2 No. and 5 No. Outgoing , Bus Coupler in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. Work includs fitting of all accessories in all respect with complete connection of control cable with pannel. All material will be provided by the Contractor except VCB and CRP. |
| 76 | Construction of cable trenchs with top cover and laying of control cable for VCB, C.T. & T/F Control Pannel etc. as per direction of engineer. trenchs to be 12” wide and 9” deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 R.B. wall 9” wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. All material will be provided by the contractor. |
| 77 | Earthing of all Structures (as LA. CT, VCB, Isolator, etc.) erected in the yard with 35x6 mm. G.I. strip fully welded at both ends and to be connected with earthmat, . |
| 78 | Earthing of 11 KV indoor equipments, switchgears as per RESSPO Drawing. with G.I. Strip of Size 35x6 mm. G.I. strip fully welded at both ends and to be connected with earthmat, |
| 79 | Earthing of T/F neutral with G.I Pipe (Specification - 2\\" dia 60 feet depth) Up to wet earth, making delta with space of 02 feet and connecting it with 50x6 mm. G.I. strip to T/F neutral giving half round turn at the T/F. |
| 80 | Two Separate body Earthing of T/F with G.I Pipe (Specification - 2\\" dia 60 fit depth) Up to wet earth and connecting it with 50x6 mm. GI strip. |
| 81 | Erection of DP with PCC pole 8.5 mtr long with all accessaries and Grouting of the PCC Pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6.(Cement, sand, brick, ballast shall be provided by the contractor.) |
| 82 | Laying and stringing of ACSR Dog conductor from bus to bar L.A, VCB, C.T., Post insulator and 33/11 KV T/F, Isolator etc. properly with jumpering with P.G. Clamp, . PG Clamp shall be provided by the contractor except ACSR Dog conductor. |
| 83 | Painting of all structure and equipment inside the switch yard with two coats of red oxide primer and thereafter two coats of aluminium paint, giving silver white finish, painting is to be done after proper cleaning of the structures. paint, primer, thinner etc. required shall be provided by the contractor himself. |
| 84 | Installation of 24 Volt Battery and Battery Charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. Fixing of rag bolt. |
| 85 | Laying of 11 KV 3x300/3x185/ 3x120 Sqmm. XLPE cable by digging 0.75 Mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it RMT and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor. |
| 86 | Fixing and termination of Outdoor/ Indoor Heat shrinkable Cable boxes of size 3 x300/3x185/3x120 sqmm. XLPE cable. Boxes will be supplied by the Contractor |
| 87 | Commissioning of the Power transformer protection33KV VCB's and 11KV VCB's CT&CRP. |
| 88 | Fabrication and grouting of cable stand for power transformer |
| 89 | Sundries ( as per site requirement/emergency work) |
| 90 | Construction of Fire wall |
| 91 | Supply of Fire Extinguisher |
| 92 | Name of Work: Supply, Carriage & Erection of new 11 KV Line Amaon Distt. Fatehpur |
| 93 | Supply of De-Centralised Materials |
| 94 | 11 KV F Bracket |
| 95 | Number Plate with clamp and Nut & Bolt |
| 96 | HDPE PIPE 6\\" DIA |
| 97 | Danger Plate with clamp and Nut & Bolt |
| 98 | G I Barbed Wire |
| 99 | Stay Clamp |
| 100 | Nut Bolt and washer all sizes |
| 101 | Clamp for 11 KV \\"V\\" type Cross arm with bolts and nuts |
| 102 | TOP CHANNEL CLAMP FOR 8.5 M PCC POL |
| 103 | 11 KV T-OFF CHANNEL CLAMP FOR 8.5 M LONG |
| 104 | CABLE JOINTING KIT outdoor 11 KV 120 mm2 |
| 105 | Carriage of following material |
| 106 | PCC Pole 9 Mtr Long. 11 KV V-type cross arm, 11 KV M.S Top channel, 11 KV Disc Fitting, 11 KV Disc Insulator, 11 KV Pin Insulator, ACSR Weasel Cond. 11 KV Cable jointing kit 3x120 sqmm, 11 KV Bracing clamp etc. |
| 107 | Erection work |
| 108 | Digging of pits of size 0.45x1.25x 1.50 mtr. for erection of PCC pole 8.5/11 mtr. Long. |
| 109 | Digging of pits of size 0.45x1.25x 1.80 mtr. for erection of ST/PCC Pole 11 Mtr. Long. |
| 110 | Erection of single PCC pole of 8.5 mtr long & 11 Mtr. SP/DP/TP/FP. |
| 111 | Mounting and fitting of V-type cross arm, 11 KV pin, pin insulator, earth clamp complete in all respect as per drawing of RESPO on single PCC pole 8.5 mtr long./STP |
| 112 | Mounting and fitting T-off Channel with clamp |
| 113 | Fabrication, mounting and fitting of top channel, bracing made of m.s. angle, earth clamp, 11 KV pin & pin insulators, disc insulator and disc fitting on PCC /STP. double pole. |
| 114 | Fabrication, mounting and fitting of M.S Channel , 11 KV disc insulator and disc fitting on PCC . double pole for riser |
| 115 | Grouting of PCC pole 8.5/11 Mtr.long with cement, sand and brick bllast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing No. RES-6. Cement, sand, brick, ballast shall be provided by the contractor. |
| 116 | Digging of pits of size 0.60x 0.60x1.2 mtr and grouting the stay rod anchor plates 0.45x 0.45x 0.45 mtr with cement, Ganga sand and brick ballast ratio 1:4:8 as per drawing No. RES-16. Cement, sand, brick, ballast shall be provided by the contractor. |
| 117 | Complete fitting of stay rod and fastening stay wire including fitting of stay clamp, turn buckle, and making ring of stay wire on both ends in seven strands 9” to 12” long. all material provided by the contractor. |
| 118 | Earthing of single PCC pole by digging 1.00 mtr deep pit and driving the electrodes of MS earth rod and connecting all the metallic parts of poles with earthing rod by G.I. wire and filling pits with soil after completion of earthing.earth wire/all materials shall be provided by the Contractor |
| 119 | Laying of Weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of Weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. The work includes jointing of Conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. All material shall be provided by Contractor such as jointing sleeve binding wire, armour rod etc. |
| 120 | Hanging of 3x120 Sqmm 11 KV XLPE Cable for Loop & Air All Materials Provided by the Contractor. |
| 121 | Laying 3x120 Sqmm 11 KV XLPE Cable in HDPE Pipe Road Crossing All material shall be provided by Contractor. |
| 122 | Installation and Fixing of 11 KV Cable Box Jointing Kit 3x120 Sqmm |
| 123 | Guarding of 11 KV Line for Road Crossing and Marcket All material shall be provided by Contractor |
| 124 | Trimming of tree branch big/small branch which is laying in alignment of 11 KV line. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender