Tender For Black Topping Of Parking Area Including Approach Road At The Eastern Side Of Old Dental Block, Approach Road To Psychiatry Block, Approach Road Of New Blood Bank - Etp/Stp Plant And The Road Between First And Second C Us At Rims, Imphal.
Tender Value
94.98 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Black Topping Of Parking Area Including Approach Road At The Eastern Side Of Old Dental Block, Approach Road To Psychiatry Block, Approach Road Of New Blood Bank - Etp/Stp Plant And The Road Between First And Second C Us At Rims, Imphal.
BOQ
| Sl. No. | Item Description |
| 1 | Providing laying and compacting Granular base/sub base with naturally occuring sand gravel naterial free from organic or other deleterious constituent spreading with motor grader and compacted by rolling with power roller of 8-10 capacity in layers not exceeding 150mm (spread thickeness. |
| 2 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density |
| 3 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. |
| 4 | Providing and laying semi dense bituminous concrete with 40-60 TPH batch type HMP producing an average output of 35 tonnes per hour using crushed aggregates of specified grading, premixed with bituinous binder @ 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with censor control to the required grade, level and allignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause no. 508 complete in all respects. |
| 5 | VG-30 |
| 6 | i) for Grading-II (10 mm nominal size) |
| 7 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 8 | All kinds of soil. |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - -All work upto plinth level: |
| 10 | ii) 1:1.5:3 (1 cem :1.5 c/sand :3 graded stone aggregate 20 mm nom size) |
| 11 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. |
| 12 | In grating, frames, guard bar, railing, brackets, gates and similar works. |
| 13 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with |
| 14 | Precoated galvanised iron profile sheets 0.40 mm thick Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender