Tender For Renovation Of The Old Community Medicine Dept For Partial Shifting And Accomodation Of Biochemistry Deptartment (Sh: Floor Tiles, Ceiling, Plastering, Painting, Repairing Doors And Windows Etc.)
Tender Value
67.54 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
14 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Imphal West → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of The Old Community Medicine Dept For Partial Shifting And Accomodation Of Biochemistry Deptartment (Sh: Floor Tiles, Ceiling, Plastering, Painting, Repairing Doors And Windows Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Taking out doors, windows and clerestory window shutters (steelor wood) including stacking within 50 metres lead: |
| 2 | Dismantling old plaster or skirting raking out joints and cleaningthe surface for plaster including disposal of rubbish to thedumping ground within 50 metres lead. |
| 3 | Structural steel work in single section fixed with or without connecting plate including cutting,hoisting,fixing in position and applying coat of approved steel primer all complete. |
| 4 | Providing wood work in frames of doors, windows, clerestory window sand other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :Local best quality Tolhao wood. |
| 5 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges brightf inished of required size with necessary screws, excluding panelling which will be paid for separately, all completeas per direction of Engineer-in-charge. |
| 6 | Providing and fixing panelling or panelling and glazing in panelledor panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelle dor panelled and glazed shutters 25 mm to 40 mm thick : |
| 7 | 4 mm thick glass panes |
| 8 | Providing and fixing aluminium sliding door bolts ISI markedanodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nutsand screws etc. complete : |
| 9 | 250x16 mm |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 11 | 200x10 mm |
| 12 | Providing and fixing aluminium handles, ISI marked,anodised(anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour or shade with necessaryscrews etc. complete : |
| 13 | 125 mm |
| 14 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. 600x600 |
| 15 | Providing corrugated G.S. sheet roofing including vertical/curvedsurface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I.limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint onover lapping of sheets complete upto any pitch in horizontal / vertical or curved surfaces) excluding the cost of purlins, raftersand trusses and including cutting to size and shape wher ever required. |
| 16 | 0.63 mm thick with zinc coating not less than 275gm/m2 |
| 17 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressedfrom M.S. sheet and galvanised with zinc coating of 120 gms/ sqm(both sided inclusive) as per IS : 277 and consisting of angle cleatsof size 25mm wide x 1.6mm thick with flanges of 27mm and37mm, at 1200mm centre to centre, one flange fixed to the ceilingwith dash fastener 12.5mm diax50mm long with 6mm diabolts,other flange of cleat fixed to the angle hangers of25x25x0.55mm of required length with nuts and bolts of requiredsize and the other end of the angle hanger fixed with intermediateG.I. channels 45x15x0.9mm running at the spacing of 1200mmcentre to centre, to which the ceiling section 0.5mm thick bottomwedge of 80mm with tapered flanges of 26mm each having clips of10.5mm at 450mm centre to centre, shall be fixed in a directionperpendicular to G.I. intermediate channel with connecting clipsmade out of 2.64mm diax230mm long G.I. wire at every junction,including fixing perimeter channels 0.5mm thick 27mm high havingflanges of 20mm and 30mm long, the perimeter of ceiling fixed towall/partition with the help of rawl plugs at 450mm centre, with25mm long drive-all screws @ 230mm interval, including fixing ofgypsum board to ceiling section and perimeter channel with thehelp of dry wallscrews of size 3.5 x 25 mm at 230 mm c/c, including jointing andfinishng to a flush finish of tapered and square edges of the boardwith recommended jointing compound,jointing tapes, finishingwith jointing compund in 3 layers covering upto 150 mm on bothsides of joint and two coats of primer suitable for board,all as permanufacturer's specification and also including the cost of makingopenings for light fittings, grills, diffusers, cutouts made withframe of perimeter channels suitably fixed, all complete as perdrawings, and specification and direction of the Engineer in Chargebut excluding the cost of painting with : 12.5 mm thick tapered edge gypsum fire resistant boardconforming to IS: 2095- Part I, |
| 18 | 12 mm thick |
| 19 | 12 mm cement plaster of mix |
| 20 | 1:4 (1 cement : 4 coarse sand) |
| 21 | 15 mm cement plaster on rough side of single or half brick wall ofmix:- 1:4 (1 cement : 4 fine sand) |
| 22 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 23 | Applying priming coats |
| 24 | With water thinnable cement primer on wall surface having VOCcontent less than 50 grams/litre |
| 25 | Wall painting with acrylic emulsion paint, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approvedbrand and manufacture, including applying additional coatswherever required, to achieve even shade and colour. |
| 26 | Two coat |
| 27 | Providing and fixing water closet squatting pan (Indian typeW.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre lowlevel white P.V.C. flushing cistern, including flush pipe, withmanually controlled device (handle lever) conforming to IS :7231, with all fittings and fixtures complete, including cuttingand making good the walls and floors wherever required: |
| 28 | White Vitreous china Orissa pattern W.C. pan of size 580 x 440mm with integral type foot rests |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 30 | Internal work |
| 31 | 25mm nominal outer dia Pipes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender