Tender For supply erection Of New Street Light Point In Ward No.10(Jhill And Nambardar Enclave) Est Cost Rs. 3.75 Lacs
Tender Value
3.75 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
5 days left
EMD
7500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for supply erection Of New Street Light Point In Ward No.10(Jhill And Nambardar Enclave) Est Cost Rs. 3.75 Lacs
BOQ
| Sl. No. | Item Description |
| 1 | GALVANIZED IRON PIPES AND G.I. EARTHING Supply & erection of G.I. pipe (A-Class) as per IS:1239 (Part-I) 2004 including sockets, bends, inspection boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as perPWD General Specifications:- Earthing earth rod 20 mm dia for providingearth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:- GI Earth rod 20 mm dia., 3 mtr. Long |
| 2 | AUTOMATIC VOLTAGE STABLIZER, TIMER TIMER: S/E of Microprocessor Based Street LightController with digital time switch daily programmed with stand by lithium batterywith back up of 6 years with min. time between 2 switching operations is 1 minute,three pole power contactors 40A. with coil voltage 220-230V AC with 1 no. aux. contact NO, MCB 2 pole 40amp. (C-Curve, 10kA) & power wiring with single core PVC insulated FR cable 10 sq. mm and control wiring with PVC insulated FR cable 1 sq. mm, 1 no. two position selector switch to bypass timer andother accessories & petty material (din rail, 4 pole bakelite terminal strip 63A/ 440V AC, required nut bolts) should be fixed on bakelitesheet 6mm thick to be mounted in a IP54 surface/ flush mounting powder coated sheetmetal (1.60mm thick) cabinet having size 450mm x 600mm x 150mm to switch ‘ON’ all the 3 phases & switch ‘OFF’ 3 phases pre-fixed timings complete in all respect as persatisfaction of Engineer-in-charge: Street Light Controller (For Three Single Phase Circuits) with 3 Nos. Three Pole Power Contactors 40A, 1 no. aux. contactor 6 amp.(2NO+2NC) with coil voltage 220V AC, 3 Nos.MCB 2 Pole 40amp. (C-Curve,10kA) & petty material (Din rail, 2 Nos. 4 pole bakeliteterminal strip 63A/ 440V AC, required nut bolts) |
| 3 | OVER HEADDISTRIBUTION ALUMINIUM CABLES, ACSR CONDUCTORS,CLAMPS, JUMPERS & JOINT KITS: Wiring over-head line in PVC insulated & PVC sheathed two single core aluminium conductor cable overall 1100 volts grade binding with G.I.wire 2mm dia. (14 SWG) with brass/ aluminium link clipscomplete in all respect as approved and desired by theEngineer In-Charge at site. PVC insulated & PVCsheathed aluminium conductor cable Overall Size10mm² (1/1.40mm) Twin Core |
| 4 | Supply and Erection of LED Street Light 36 watt (including LED driver) with pressure diecast aluminium housing with control gear ( with IP 65/ IP 66 protection), CRI Minimum 70, CCT >5700K, toughened glass fitting, LED fixture minimum 120 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection (as per BISstandards) , surge protection 10kv and above (as per (IS/IEC standards) wattage of each LED High power LED of 1 watt to 5 watt withmandatory modular lenses, input AC frequency 50 Hz ± 3 % 5 year warranty including their drivers complete along with erection of the same with connections, testingetc. complete in all respects as approved anddesired by the Engineer-in-charge at site.LEDFitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter no AT-2021/GL 1410-1422 Dated 06/05/2021. Dated 06/05/2021. Besides this the lighting fixture manufactures should have in house NABL accredited labortary |
| 5 | Supply and erection of G.I. Pipe (A-Class) Single arm bracket of 01mtr. length to give a total overhang at a tentative angle of 100/105º, the bracket should be fixed on the existing surface/ wall with 2nos. MS flat clamp 25mm x 5mm, 30cm long and 4nos. fastner 10mm x 75mm long with two coats of an approved aluminium paint complete in allrespect as approved by the Engineer-in-charge at site:- |
| 6 | 2 Core PVC Insulated Aluminum Conductor Cable 2.5 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender