Tender For Renovation & Repair Works In Nic Office At Collectorate Jhunjhunu
Tender Value
12.04 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
8 days left
EMD
24080
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhunjhunu → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation & Repair Works In Nic Office At Collectorate Jhunjhunu
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work : |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal ofunserviceable material within 50 meter lead |
| 3 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 4 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) |
| 5 | Thermo-mechanically Treated bars (Conforming of relevent IS code) |
| 6 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : |
| 7 | Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 8 | Supplying and fixing in walls machine cut and polished stoneshelves, tands and in CM 1:3 with machine cut edges |
| 9 | Kota stone minimum 30mm thick |
| 10 | Providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering |
| 11 | M10 grade Nominal Mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 12 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excludingthe cost of centering and shuttering - All work up to plinthlevel. |
| 13 | M10 grade Nominal Mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate20mm nominal size). |
| 14 | Demolishing R.C.C. work manually/ by mechanical meansincluding stacking of steel bars and disposal of unserviceablematerial within 50 metres lead as per direction of Engineer-incharge |
| 15 | Brick work with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level in allshapes and sizes in |
| 16 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 17 | Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 |
| 18 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 19 | Plaster on new surface on walls in cement sand mortar 1:4including racking of joints etc. complete fine finish |
| 20 | 20mm thick |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 22 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including allscaffolding |
| 23 | Two or more coats on new work including prepartion of basewith primer, putty, lippy etc complete in all respect. |
| 24 | Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade including allscaffolding |
| 25 | Old work (One or more coats ) |
| 26 | Demolishing brick work manually/ by mechanical meansincluding stacking of serviceable material and disposal ofunserviceable material within 50 metres lead as per directionof Engineer-in-charge |
| 27 | In cement mortar |
| 28 | Demolishing stone rubble masonry manually/ by mechanicalmeans including stacking of serviceable material and disposalof unserviceable material within 50 metres lead as perdirection of Engineer-in-charge |
| 29 | In lime mortar |
| 30 | Repairs to plaster of thickness 12mm to 20mm in patches ofarea 2.5 sq. metres and under including cutting the patch inproper shape, raking out joints and preparing and plasteringthe surface of the walls complete including disposal of rubbishto the dumping ground within 50 m lead With cement mortar1 :4 ( 1 cement : 4 coarse sand) |
| 31 | Providing and fixing in CM 1 : 4 double paitam (rebated)stone door window and ventilator frames of approved quarry: |
| 32 | Size 100 x 75mm |
| 33 | Providing and fixing external grade board solid core singleleaf flush door shutters ISI 2202-67 marked using Phenolformal dehyderesin in glue both sides with approved steelfittings complete as per annexure 'A' |
| 34 | 25 mm thick |
| 35 | Decorative teak veneer both side |
| 36 | Providing and fixing of uPVC Sliding windows: Frame Made from the Extruded uPVC Window Profile Section of size 106w x 50h mm having outer wall thickness of 2.5mm (+/- 0.2mm) and 3 box multi-chamber construction, Laminated (colour) finish, duly reinforced with 1.2 mm thick GI section. Frame shall have three track configuration, two for sliding ofwindow shutter and one for mosquito mesh shutter. Vertical member of frame which bears the sliding shutter load shall have aluminium rail/track for smooth sliding of shutter rollers. All the four corners shall be mitered cut & thermal welded so as to form window frame. Frame shall be milledwith drain and air equalizer hole in order to be water tight and for drainage of accumulated water, if any, to outer side. Shutter : The shutter of sliding window shall be made of 39w x 69h mm Extruded 3 box multi- chamber uPVC Window Profile Section of laminated ( colour) having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5mm thick GI section duly mitered cut &thermal welded at all corners and fitted with uPVC glazing bead of size 22 x 20 mm with inner and outer co-extruded EPDM/TPE-E weather seal gaskets alongwith 6mm thick ISI make plain float glass. Mesh shutter shall be made of 39w x 69h mm Extruded 3 box multi-chamber UPVC Windowprofile section of laminated ( colour) having outer wall thickness of 2.5mm (+/- 0.2mm) provided with reinforcement of 1.5 mm thick GI section duly mitered cut & thermal welded at all corners and fitted with nylon/polymermesh and rollers/pully. |
| 37 | Providing and fixing factory made P.V.C. door frame of size50x47mm with a wall thickness of 5mm, made out ofextruded 5mm rigid PVC foam sheet mitred at corners andjoined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge |
| 38 | Providing and fixing to existing door frames. 30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7mm (5mm +2mm) thick x 15mm wide PVC sheet bending on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacture’s specification & drawing.(For W.C.and bathroom door shutter). |
| 39 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. |
| 40 | Jhunjhunu / Jalore (Red/Choclate/Black/Pink Up to 1500 Cm2 Tiles) |
| 41 | Providing and fixing aluminum work for doors ,windows,ventilators and partition with extruded built up standardtubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling tobe paid for separately). For fixed portion |
| 42 | Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) |
| 43 | Providing & Fixing Aluminium composite panel of indobond/euro/flexi bond of equivalent made 3mm that with0.5mm thick skin& PVDF coated of approved shads for toiletdoor in double layer in Aluminium frame complete in allrespect as per sample approved by Engineer in Charges |
| 44 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. |
| 45 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charg |
| 46 | Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) |
| 47 | Providing and fixing 1st quality MAT finished ceremic tilesize 300x300mm confirming to code IS : 15622 colour suchas white, grey, ivory, fume red brown, light green, light blueand other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 48 | Extra for using Marble printed / Granite shade or darkshade tiles instead of white, grey, ivory, fume red brown,light green, light blue and other light shades in glazedtiles and MAT finished tiles. |
| 49 | Extra for using size above 200x300mm in glazed tiles andfor using 400mm x 400mm MAT finished tiles in place of300mm x 300mm size |
| 50 | P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete. |
| 51 | Providing and fixing 1st quality standard white, grey, ivory,fume red brown, light green, light blue and other light shadesglazed tiles confirming to code IS : 15622 of size 200mm x300mm in walls, floors, steps, pillars etc. laid on a bed of neatcement slurry finished with flush pointing in the white cementmixed with pigment to match the shade of the tile complete(excluding the cost of cement plaster on walls and pillar). |
| 52 | Extra for using Marble printed / Granite shade or darkshade tiles instead of white, grey, ivory, fume red brown,light green, light blue and other light shades in glazedtiles and MAT finished tiles |
| 53 | Extra for using size above 200x300mm in glazed tiles andfor using 400mm x 400mm MAT finished tiles in place of300mm x 300mm size. |
| 54 | Providing and fixing of wall paneling on grid made out ofPVC profile section of size 21x17mm with a wall thickness of 1.5mm+/-0.2mm,fixed on the existing wall with wood screw of size 50mm X 8mm with rowel plug at a spacing of 900mm center.uPVC profile section of size 150mm X 10mm with a wall thickness of 1.0mm+/-0.2mm to be fixed on the grid by self tapping screw of size 19mm X 6mm.Necessary cutouts for electrical connection to be provided at required places. The edge and periphery, finally to be covered by extruded PVC beading section of size 28mm X 12mm with a wall thickness of 1.0mm+/-0.2mm complete as per manufacture‟s specification and direction of Engineer-in-charge. |
| 55 | Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead |
| 56 | Of area 3 square meter and below |
| 57 | Removing aluminium/Gypsum partitions, doors, windows,fixed glazing and false ceiling including disposal ofunserviceable material and stacking of serviceable materialwith in 50 meters lead as directed by Engineer-in-charge |
| 58 | Providing & fixing 12 mm thick tegular edge Glass FibreReinforced Gypsum False ceiling tiles of size 595 x 595 mmin true horizontal level suspended on inter locking metal gridof hot dipped galvanised steel sections ( galvanized @ 170gsm/sqm.) consisting of main “T” runner with suitablyspaced joints to get required length and of size 24x38mmmade from 0.30mm thick (minimum) sheet spaced at1200mm center to center and cross “T” of size 24x25mmmade of 0.30mm thick (minimum) sheet, 1200mm longspaced between main “T” at 600mm center to center to forma grid of 1200x600 mm and secondary cross “T” of length600mm and size 24x25mm made of 0.30 mm thick(minimum) sheet to be interlocked at middle of the1200x600mm panel to formSqm 1365.00grids of 600x600mm and wall angle of size 21x21x0.30 mmand laying false ceiling tiles of approved texture in the gridincluding, wherever, required, cutting/making, opening forservices like diffusers, grills, light fittings, fixtures, smokedetectors etc. Main “T” runners to be suspended from ceilingusing GI slotted cleats fixed to ceiling with 6 mm dia and50mm long dash fasteners, 4mm GI adjustable rods withgalvanised level clips spaced at 1200mm center to centeralong main T, bottom exposed width of 24mm of all Tsections shall be pre-painted with polyester paint, allcomplete at all heights as per specifications drawings and asdirected by Engineer-in-Charge |
| 59 | Grading roof for water proofing treatment with waterproffing compound |
| 60 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) |
| 61 | Providing & laying broken glazed titles on roof ( brokenglazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30Kg/Sqm. Of VG-10 (80/100) grade) and joints filled withcement mortar 1 :2 (1 cement:2 marble dust mixed with waterproofing compund all complete as per direction of Engineerin-charge |
| 62 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :(i) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(ii) laying second layer of Fiber glass cloth when the first layer is still green . Overlaps of joints of fiber cloth should not be less than 10 cm .(iii) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proffing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around (iv) fourth and final layer of brick tiling „with cement mortar or any other approved protective coarse. (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured |
| 63 | P & F WVC Wash basin (Ist quality IS:2556 Mark) ofapproved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall |
| 64 | Size 630 mm x 500 mm dia for counter top |
| 65 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge |
| 66 | Swan neck pillar cock 15 mm nominal size |
| 67 | P & F Inlet Connection (Angle Valves) Superior quality, ofapproved make, for Wash basin, Gyser etc. |
| 68 | C.P. Inlet connection 15mm.Brass (IS : 8931 marked) |
| 69 | P & F 15 mm. Dia Connection Pipe of approved quality/make |
| 70 | PVC pipe with C.P. Brass nuts upto length 600mm |
| 71 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed ironbrackets or screws etc complete |
| 72 | Flat Back (large) or half stall size 610x400x80mm. |
| 73 | Providing & Fixing Premium Quality white glazed vitreouschina Sanitary Wares (IS:2556 Mark) of approved make as per direction of Engineer-in-charge including cutting and making good the wall and floor. |
| 74 | Double Syphonic European W.C. with mounted W.V.C.flushing cistern of 10 litre capacity complete with allnecessary internal fittings with Hydraulic seat cover. |
| 75 | P & F Grating of approved quality/make: |
| 76 | Stainless Steel Sheet size 125mm dia. Heavy Quality ofapproved make |
| 77 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge |
| 78 | Two way Bib Cock 15 mm nominal size |
| 79 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge |
| 80 | Health focet (Premium heavy Quality) as approved byEngineer-in-Charge |
| 81 | P&F Marble Urinal Partition slab both sides polished ofapproved design cut from marble size 900x600mm. |
| 82 | Makrana II quality marble having light spots |
| 83 | Supply & fixing G.I. Union ISI marked in G.I. pipe line asrequired complete in all respect of size |
| 84 | 25mm dia nominal bore |
| 85 | P & F G.I. pipes (Internal Work) with G.I. Fittings excludingunion (IS:1239 Mark) & MS clamps including cutting andmaking good the walls and floors Concealed pipe in wall including painting with anticorrosive bitumen paint |
| 86 | 15 mm dia nominal bore 'A' Class |
| 87 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. |
| 88 | Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour) Up to 1500 Cm2 Tiles |
| 89 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 90 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .)approved quality /make including joining the pipe withsolvent cement rubber ring and lubricant |
| 91 | 75 mm dia |
| 92 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant |
| 93 | Bend 87.5 75mm dia |
| 94 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant |
| 95 | Plain Tee 75mm dia |
| 96 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .)approved quality /make including joining the pipe withsolvent cement rubber ring and lubricant |
| 97 | 110 mm dia |
| 98 | Providing and Fixing Unplasticized Poly Vinyl Chloride(UPVC) SWR Pipes Type B for sciland waste dischargesystem (IS:13592 : 1992 Marked) of approved quality /make |
| 99 | 110 mm dia |
| 100 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant |
| 101 | Bend 87 .5 110mm dia |
| 102 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant |
| 103 | Bend 45 110mm dia |
| 104 | Making khurras 450 x 450mm with average minimumthickness 50mm cement concrete 1 : 2:4 over P.V.C. Sheet 1Mtr. x 1 Mtr. x 40micron finished with 12mm cement plaster1 : 3 and one coat of neat cement, rounding edges andmaking and finishing the out let complete. |
| 105 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr. |
| 106 | size 600 x 450mm depth upto 0.5 M Cement cover with frame. |
| 107 | Construction of soakage well in all type of soil with 300 mmthick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: |
| 108 | Size 300 Cm. dia outside & 300 Cm. depth |
| 109 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge |
| 110 | Revolving type towel ring |
| 111 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge |
| 112 | Paper holder |
| 113 | P & F Soap Dish or Tray of approved quality/make |
| 114 | C.P. brass heavy and superior quality. |
| 115 | P & F Liquid Soap Container with brackets complete ofapproved make: |
| 116 | C.P. brass |
| 117 | Removing and re-fixing of wash hand basin including all necessary fittings. |
| 118 | Labour charges for removing W.C. pan (any type) of all sizeswith care including all necessary fittings P or S trap. |
| 119 | P&F Looking Mirror 5mm thick of approved make withornamental frame size 50x12 with 6mm Ply Board on BackSide Complete as per approved sample |
| 120 | Providing and fixing Superior quality CP Brass fittings ofapproved make as per direction of Engineer-in-charge |
| 121 | 600 mm long towel rail |
| 122 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 123 | Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade |
| 124 | Two or more coats on new work |
| 125 | Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender