Tender For Repairing Renovation Of 400 Mtr Grassy Athletic Field, Provision Of 10 Mtr High Performance Analysis Platform In Hockey Turf Ground, Repairing Renovation Of Existing Fountains Etc At Ncoe Sonepat
Tender Value
45.87 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
17 days left
EMD
91750
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonipat → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Renovation Of 400 Mtr Grassy Athletic Field, Provision Of 10 Mtr High Performance Analysis Platform In Hockey Turf Ground, Repairing Renovation Of Existing Fountains Etc At Ncoe Sonepat
BOQ
| Sl. No. | Item Description |
| 1 | Item Wise BoQ BoQ_Ver3.0 Item Wise Normal INR Only INR Select, Excess (+), Less (-) Tender Inviting Authority: |
| 2 | Supplying and stacking at site. |
| 3 | Good earth |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 5 | Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same and removed all the weeds from the ground. |
| 6 | All kinds of soil |
| 7 | Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge |
| 8 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) |
| 9 | Screened through sieve of I.S. designation 4.75 mm |
| 10 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 11 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 12 | Providing services of temdem road roller |
| 13 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge. |
| 14 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 15 | For thickness of tiles 10 mm to 25 mm |
| 16 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 17 | 32 mm nominal dia Pipes |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 19 | 80 mm nominal dia Pipes |
| 20 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Supplying, Installation, Testing and Commissioning ofNozzle made with gunmetal Grade Geyser jet 100mmıwith adjustable nozzle for height adjustment of thefountain etc. Complete as required. |
| 23 | Supplying Installation, Testing and Commissioning of Eco Cluster Nozzle made of stainless steel with inlet dia 80 mm and 64 nos Single jets to Create 67 mm dia full jet for fountain height 10 mtr water level in depended etc. complete as required. |
| 24 | Supplying, Installation, Testing and Commissioning of ISI Marked openwell submersible pump set contain with stainless steel shaft and cast iron/SS body, the pump shall be designed to prevent over loading and having dynamically balanced rotating parts etc. the pump capable of delivering following capacities discharge at suitable head and lowering the pumps in water bodies and suitable for operation on 415V(+- 10%), 3-phase AC supply including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet including connection, interconnection ,supports etc. as required. suitable for 900LPM at 25 Mtrs Head etc. complete as required. |
| 25 | Supplying, Installation, Testing and Commissioning of underwater Luminaries surface mounted RGB LED spot light 6 x 3W with IP 68 protection, SS/ aluminum dia casting body with power coated paint, soft rubber gasket along with 2 years free replacement guarantyetc. complete as required. |
| 26 | Supplying, Installation, Testing and Commissioning of water proof (IP 68) power supply unit of not less than 200W i/c connection along with 2 years free replacement guaranty etc. complete as required. |
| 27 | Supplying, Installation, Testing and Commissioning of fixing of Suction Screen stainer made of ABS to be fitted in suction to protect the pump from enrty of external materials etc. complete as required. |
| 28 | Supplying, Installation, Testing and Commissioning of three phase open well ISI Marked submersible pumpset of 1.5H.P. capacity suitable for operation on 415V(+-10%), 3- phase AC supply compatible for operations on dynamic variable frequency / speed having IP 68 Protection including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MSsheet as required. and making of flexible IP68 cable connections etc. complete of suitable head and discharge etc. complete as required |
| 29 | Providing and constructing natural rockery waterfall feature using approved hard stone boulders of varying sizes (300 mm to 1000 mm dia), carefully selected, dressed where required, stacked and fixed in position, embedding in concrete/mortar where required, joint filling and anchoring arrangements to form a multi-tier cascading waterfall structure of approved shape, height and profile, including excavation, foundation preparation, transportation, loading/unloading, curing, all labour, tools, plants, and materials complete as per approved design and direction of Engineer-in-Charge. |
| 30 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 31 | Hot finished welded type tubes |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 33 | Two or more coats on new work |
| 34 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in |
| 35 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 36 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 37 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived fromnatural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources) |
| 38 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 39 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 40 | 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 41 | Providing and fixing 12mm thick frameless toughened glassdoor shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) |
| 42 | Providing, fixing, testing and commissioning of Automatic Door Sensor with Electromechanical Door Operator for existing 12 mm thick toughened glass gate, including microwave/radar sensor, safety beam sensor, controller, power supply unit, mounting hardware, cabling, programming, commissioning and all incidental works complete as require. The system shall be suitable for single/double leaf 12 mm toughened glass doors, with adjustable opening/closing speed, hold-open time, obstacle detection and manual override facility |
| 43 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 44 | 80 mm nominal bore Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select % 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender