Tender For Construction Of Yoga Hall And Other Beautification Work In Qila Park And Gandhi Park Ward 10 Mc Panipat.
Tender Value
2.49 Crore
Estimated cost
Bid Submission
28 Jul 2026
21 days left
EMD
4.98 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karnal → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Yoga Hall And Other Beautification Work In Qila Park And Gandhi Park Ward 10 Mc Panipat.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, erection and installation of ISI mark uPVC corrugated sheet for roofing of gazebo with provision and fixing of sheet with J-bolts complete in the satisfaction of engineer-in-charge. |
| 2 | Cast Iron Benches made up of M.S. tubes 2`x1` in length of 5 ft size and 13 square tubes weighing minimum 24 Kg per bench. The tubes in the back and in seat shall be painted with powder coated paint of any shade of wooden/brown/yellow/green as per the satisfaction and in complete discretion of Engineer-in-Charge. The legs and the Stands shall be of Cast Iron in Decorative Shape to provide aesthetics as well as for safety of the bench. The dimension of the legs shall suitably provide the mounting height of 32` and 24` in width and the weigth of the same shall not be less than 44 Kgs.(The rate is inclusive of the cost of loading, unloading and transportation (within MC Panipat area in different wards) including the charges of paint for lettering of the text as provided by the Engineer-in-charge). |
| 3 | Supply of mineral oxide based pigment (Iron Oxide), UV stable, alkali resistant and weatherproof, suitable for integrally coloured cement concrete, conforming to ASTM C-979, Fe As Fe203 :) 96.0 (%)Matter volation at 1050C : (1.0 (%)Water soluble salts :( 0.3 (%)Residule on 320mesh :( 0.3 (%)PH value : 3.0-7.0Oil absorption :15-25 (g/100g)Conductivity :(400 (us/cm)Tinting stregth : :98-102 (%)complete as approved by Engineer-in-Charge. |
| 4 | LED Down lighter (SMD Type) (System lumen efficacy =120 (135 lm/Watt ) Supplying, installation, Testing and Commissioning of LED Recessed /surface Down lighter (Round / square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency )85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short and Open circuitprotection ,THD ( 10% , P. F. = 0.95, IP20, CRI )80 , UGR (Unified Glare Rating) ( 19, Flicker free (flicker should be below 5 %), life time (LED,Driver and electrical circuitry), life time of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends , CCT 3000 °K / 4000 °K / 5700°K/6000 ° K/6500 ° K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) (3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. `complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy = 120 (135 lm/Watt output . LM79 and LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C12-15 watt |
| 5 | Plumbing Kit3HP SWIMMING POOL PUMP (EMAUX) |
| 6 | SMPS CONTROLLER |
| 7 | EYE BULL NOZZEL |
| 8 | MAINTAINANCE KIT |
| 9 | MAIN DRAIN |
| 10 | GATE WALL BRASS 3` |
| 11 | SAND MEDIA |
| 12 | WATER PROOFING |
| 13 | PLUMBER and INSTALLATION |
| 14 | Lighting: 8 Nos LED Underwater Lights plus Wiring |
| 15 | ELECTRICIAN and INSTALLATION |
| 16 | JUNCTION BOX |
| 17 | SUCTION NOZZEL |
| 18 | Providing and fixing vertical fins made of 75 mm × 100 mm rectangel hollow section fabricated box section in approved spacing and alignement including cutting wekling grindiing primer powder |
| 19 | Providing and fixing custom embedded logo signage in approveddesign and dimensions, fabricated in MS/GI/SS/Acrylic material usingCNC laser cutting, powder coated / polished finish, fixed flush withingate/facade panel, including backing support, mounting hardware, concealed wiring and LED illumination where required, complete inall respects. |
| 20 | Providing and fixing exterior grade WPC wooden finish cladding ofapproved shade and profile, made from wood-plastic compositeboards/panels, fixed over GI/aluminium subframe with SSscrews/clips, including edge trims, sealants, cutting, alignment andcomplete installation |
| 21 | Providing and fixing decorative perforated jaali backlit panelfabricated from 2 mm thick GI sheet in approved perforation / CNClaser-cut pattern, powder coated finish, mounted over metal frame with minimum 50 mm cavity behind panel, complete with IP65 LEDlighting system, driver, concealed wiring, anchors and installationcomplete. |
| 22 | Providing and fixing fluted sandstone cladding of approved colour andtexture, machine grooved/fluted profile, minimum 18–20 mm thick, fixed with polymer adhesive / mechanical clamps on prepared surface, including cutting, edge finishing, joint filling, scaffolding andcomplete installation |
| 23 | Providing and fixing warm-white LED profile strip lighting (IP67rated for exterior use) integrated into the cladding channels outlining |
| 24 | 3D Acrylic backlit signage for ` PARK` and the central symbol, complete with weatherproof LED modules and concealed wiring |
| 25 | Supply, fabrication, and installation of customized, heavy-dutyobservation deck railing . The railing system shall include thefollowing components:1. Structural Posts and Framing2. Infill System (Stainless Steel Cables)3. Continuous Top Rail |
| 26 | Lighting: 6 Nos LED IP65 Lights plus Wiring. |
| 27 | Supplying, installation, Testing and Commissioning of Street light LED fixture powder coated pressure die cast aluminum body with driver as per the requirement with Driver efficiency )85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency )85%,THD ( 10% as per IEC 61000-3-2 , P. F.=0.95, IP- 66,IK-10, CRI )80, under voltage and over voltage protection, EMI- EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin),SDCM(Standard Deviation Color Matching) (5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BISstandard complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy =105 (120 lm/Watt output . LM79 and LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) |
| 28 | Providing, supplying, installing and commissioning 1.5 meter high decorative boulevard lighting pole made of MS/GI/aluminium with powder coated / painted finish, complete with single or double arm decorative bracket, including LED street light fitting of 12 W capacity having IP65 protection suitable for 230V AC supply. The pole shall be erected on RCC foundation of suitable size including excavation, PCC, RCC, curing and backfilling. The work shall also include supply and laying of underground cable, junction box, earthing, complete wiring, testing and commissioning complete in all respects as per direction of Engineer-in-Charge. |
| 29 | Providing, fabricating and fixing decorative visual marker ‘GURU-2’ of size 400 mm × 1500 mm height, made of MS/ACP/Acrylic composite structure with provision of 100W LED luminaire (IP65), including internal wiring, LED fitting, driver, diffuser/laser cut panel as per approved design, complete with MS frame, base plate, anchor bolts, fasteners, painting/powder coating etc., and including civil works such as excavation, PCC/RCCfoundation (of suitable size, approx. 0.6 m × 0.6 m × 0.75 m), fixing of anchor bolts, grouting, curing, backfilling, disposal of surplus earth, complete in all respects as per drawings and direction of Engineer-in-Charge.” |
| 30 | CONTROLLER and PUMP : Irrigation Controller (4-Station) plus 2.0 HP Monoblock Pump Set. |
| 31 | DOUBLE AIR WALKER ( Model No. LK - 175 )DIMENSION: 7FT HT X 3FT ALL PIPES ARE GI, ISI, B CLASS BRAND: PRAKASH SURYA/ TATA/JINDALBUSH, BEARING HEAVY (SKF, NRB, OR EQUIVALENT). THE BOTTOM SUPPORT POINT 8INCH ROUND PLATE, 10MM THICKNESS. FOOTRESTS MADE UP OF FRP/PVC. CLOSING CAPS MADE UP OF FRP/PVC. PINS USED ARE MADE UP OF 25MM BRIGHT BAR. NUT BOLT GI BEARINGS: MAINTAINENCE FREE BALL BEARINGS PLASTIC PART: SOLID POLYETHYLENE, UV STABILISED/EQUIVALENT MAXIMUM USER WEIGHT: 100 TO 120 KG MAXIMUM BREAKING POINT: 140 KGPAINT: POWDER COATED. DIAMETER: MAIN SUPPORTING PIPE (100 MM DIA). |
| 32 | PUSH UP BAR ( MODEL NO. LK - 185)DIMENSION: HT 5 FT X 4 FTL ALL PIPES ARE GI, ISI, B CLASS BRAND: PRAKASH SURYA/ TATA/JINDALTHE BOTTOM SUPPORT POINT 8INCH ROUND PLATE, 10MM THICKNESS. FOOTRESTS MADE UP OF FRP/PVC. CLOSING CAPS MADE UP OF FRP/PVC. PINS USED ARE MADE UP OF 25MM BRIGHT BAR. NUT BOLT GI PLASTIC PART: SOLID POLYETHYLENE, UV STABILISED/ EQUIVALENT MAXIMUM USER WEIGHT: 100 TO 120 KG MAXIMUM BREAKING POINT: 200 KG POWDER COATED, MAT FINISH, THICKNESS 80 TO 120 MCN. |
| 33 | CHEST PRESS SINGLE ( Model No. LK - 194 )DIMENSION: HT 6FT X 3 FTL ALL PIPES ARE GI/CR , ISI, B CLASSBRAND: PRAKASH SURYA/ TATA/JINDAL BUSH, BEARING HEAVY (SKF, NRB, OR EQUIVALENT). THE BOTTOM SUPPORT POINT 8INCH ROUND PLATE, 10MM THICKNESS.FOOTRESTS MADE UP OF FRP/PVC. CLOSING CAPS MADE UP OF FRP/PVC. PINS USED ARE MADE UP OF 25MM BRIGHT BARNUT BOLT GI.BEARINGS: MAINTAINENCE FREE BALL BEARINGSPLASTIC PART: SOLID POLYETHYLENE, UV,STABILISED/ EQUIVALENT.MAXIMUM USER WEIGHT: 100 TO 120 KG.MAXIMUM BREAKING POINT: 140 KG PAINT: POWDER COATED DIAMETER: MAIN SUPPORTING PIPE (100MM DIA). |
| 34 | LEG PRESS ( MODEL NO. LK - 197)DIMENSION: HT 5FT X 5 FTL ALL PIPES ARE GI/CR , ISI, B CLASS BRAND: PRAKASH SURYA/ TATA/JINDAL BUSH, BEARING HEAVY (SKF, NRB, OR EQUIVALENT). THE BOTTOM SUPPORT POINT 8INCH ROUND PLATE, 10MM THICKNESS.FOOTRESTS MADE UP OF FRP/PVC. CLOSING CAPS MADE UP OF FRP/PVC.PINS USED ARE MADE UP OF 25MM BRIGHT BAR NUT BOLT GI BEARINGS:MAINTAINENCE FREE BALL BEARINGS PLASTIC PART: SOLID POLYETHYLENE, UV,STABILISED/EQUIVALENT MAXIMUM USER WEIGHT: 100 TO 120 KG MAXIMUM BREAKING POINT: 140 KGPAINT: POWDER COATED DIAMETER: MAIN SUPPORTING PIPE (100 MM DIA).. |
| 35 | ROWER ( MODEL NO. LK - 173)AREA: 1.2 X 1 MTR SAFE ARE: 1.5 X 1.5 MTR SPECIFICATIONS: MADE FROM `B` CLASS G.I. PIPE. HANDLE FRAME: 32 MM MADE FROM `B` CLASS G.I. PIPE. SEATS: HIGH QUALITY FRP MATERIAL, SIZE 330 MM X 300 MM, 3 MM THICKNESS. SUPPORT PLATE: M.S. PLATE, SIZE 250 MM X 200 X 5MM. CLOSING CAPS: TOP QUALITY FRP MATERIAL, 2 MM THICKNESS. PINS: 25 MM BRIGHT BAR. BEARINGS: `6205` PERMANENT LUBRICATED SEALED BEARING (FAG/SKF). PAINT: POWDER COATED. |
| 36 | TRIPPLE TWISTER ( MODEL NO. LK - 183)DIMENSION: HT 4 FT X 4.5 FTL ALL PIPES ARE GI, ISI, B CLASS BRAND: PRAKASH SURYA/ TATA/JINDAL BUSH, BEARING HEAVY (SKF, NRB, OR EQUIVALENT). THE BOTTOM SUPPORT POINT: 8INCH ROUND PLATE, 10MM THICKNESS. ROUND PLATE: 12 THICKNESS 10 INCH. CLOSING CAPS: MADE UP OF FRP/PVC. PINS USED: MADE UP OF 25MM BRIGHT BAR NUT BOLT GI BEARINGS: MAINTAINENCE FREE BALL BEARINGS PLASTIC PART: SOLID POLYETHYLENE, UV STABILISED/EQUIVALENT MAXIMUM USER WEIGHT: 100 TO 120 KG MAXIMUM BREAKING POINT: 140 KG POWDER COATED, MAT FINISH, THICKNESS 80 TO 120 INCH. DIAMETER: MAIN SUPPORTING PIPE (100 MM DIA). |
| 37 | CROSS WALKER BAR ( MODEL NO. LK - 190)DIMENSION: HT 5 FT X 4 FTL ALL PIPES ARE GI, ISI, B CLASS BRAND: PRAKASH SURYA/ TATA/JINDALTHE BOTTOM SUPPORT POINT: 8INCH ROUND PLATE, 10MM THICKNESS. FOOTRESTS: MADE UP OF FRP/PVC. CLOSING CAPS: MADE UP OF FRP/PVC. PINS USED: MADE UP OF 25MM BRIGHT BARNUT BOLT: GI PLASTIC PART: SOLID POLYETHYLENE, UV STABILISED/ EQUIVALENTMAXIMUM USER WEIGHT: 100 TO 120 KG MAXIMUM BREAKING POINT: 200 KG POWDER COATED, MAT FINISH, THICKNESS 80 TO 120 INCH |
| 38 | MULTIPLAY EQUIPMENT ( Model no. N/A) |
| 39 | FRP TRI-WAVE SLIDE ( Model no.LK-SL-44 ) |
| 40 | 2 IN 1 SWING ( Model no.LK-SW-57 |
| 41 | RAINBOW CLIMBER ( Model no. LK-CL-112 ) |
| 42 | Providing CNC laser-cut decorative panel in approved design, fabricated from 2 mm thick GI/MS sheet, edges smooth finished, primer/powder coated complete, measured in square meter basis.. |
| 43 | Providing and applying approved quality PU based sports game linemarking on badminton court surface including setting out and markingof court lines as per standard dimensions, surface cleaning, masking,application of primer wherever required, applying two coats of highquality abrasion resistant polyurethane/acrylic sports paint, ensuringsharp edges, uniform width, proper curing and finishing complete in allrespects as per manufacturer`s specifications and direction ofEngineer in-Charge. |
| 44 | Providing, supplying and fixing approved quality badminton netpost/poles complete with base sockets, tensioning arrangement, nethooks, foundation arrangement and all accessories required for fixingand maintaining badminton net, including installation, alignment,painting/coating, grouting and finishing complete in all respects as perstandard specifications and direction of Engineer-in-Charge. |
| 45 | CONSTRUCTION OF YOGA HALL AND OTHER BEAUTIFICATION WORK IN QILA PARK AND GANDHI PARK WARD 10 MC PANIPAT. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender